On Sat, Nov 6, 2010 at 1:44 PM, Michael Segel <[email protected]>wrote:

>
>
> Nothing against Super Micro, but...
>
> You're paying a premium for the half board machines and you're also going
> to be paying a premium for 2.5" disks.
>
> Are you really that tight on rack space?
>

More tight on $ than rackspace :).

I think the chassis costs about the same, if not cheaper, than Dell or HP.

I just bought a 2.5" 5400 rpm 1TB drive from Fry's for $90 last Tuesday. So
yeah, its more $/TB/drive , since a 3.5" 1TB drive at the same rpm costs
about $70.   But I got 2 more spindles per machine compared to a 4-drive
unit, so its 50% better I/O perf (both xfer rate and disk-ops) for about
$220 more ( = 2 x $90 + 4 x ($90 - $70))  more.




>
>
> > Date: Sat, 6 Nov 2010 07:25:04 -0700
> > Subject: Re: Where do you get your hardware?
> > From: [email protected]
> > To: [email protected]
> >
> > Supermicro also sells 4 nodes in a 2U, with 24 2.5" drives.  You get 6
> > drives per node, which is 50% more disk per node. The prices seem to be
> > pretty good.
> >
> >
> > On Fri, Nov 5, 2010 at 10:17 PM, tsuna <[email protected]> wrote:
> >
> > > On Fri, Nov 5, 2010 at 8:59 PM, Patrick Angeles <[email protected]>
> > > wrote:
> > > > Did you mean 2 nodes in 2U?
> > >
> > > No, I meant 2 nodes in 1U.
> > >
> > > > Dell, HP and SuperMicro all have models that fit the bill. If you
> really
> > > did
> > > > mean 2 nodes in 1U you're looking at either 2.5" drives or < 4
> spindles
> > > per
> > > > node, neither of which is ideal for Hadoop/HBase in terms of !/$
> (bang
> > > per
> > > > buck).
> > >
> > > Yeah those particular models have room for 4 x 3.5" disks (so 2 per
> > > node).  Given how much they cost, they still give you a pretty good
> > > !/$.  Plus, you can always mod them a little bit to fit more disks in
> > > the system (this, however, is left as an exercise for the reader).
> > >
> > > There are other vendors who sell cheap 2-in-1U servers, some may offer
> > > more 3.5" disk slots out of the box.  Otherwise you can always do like
> > > Google and build your own.  You just need a bunch of dudes who are
> > > passionate about that stuff :)
> > >
> > > --
> > > Benoit "tsuna" Sigoure
> > > Software Engineer @ www.StumbleUpon.com
> > >
>
>

Reply via email to