I tried to run scan/get/scan/get many times, and always the same pattern. You can remove the "LIMIT => 1" parameter and you will get the same performances.
Scan and get without the QC returns in very similar time. 191ms for one, 194ms for the other one. 2015-05-19 23:02 GMT-04:00 Ted Yu <[email protected]>: > J-M: > How many times did you try the pair of queries ? > > Since scan was run first, this would give the get query some advantage, > right ? > > Cheers > > On Tue, May 19, 2015 at 7:34 PM, Jean-Marc Spaggiari < > [email protected]> wrote: > > > Are not Scan and Gets supposed to be almost as fast? > > > > I have a pretty small table with 65K lines, few columns (hundred?) trying > > to go a get and a scan. > > > > hbase(main):009:0> scan 'sensors', { COLUMNS => > > ['v:f92acb5b-079a-42bc-913a-657f270a3dc1'], STARTROW => '000a', LIMIT => > 1 > > } > > ROW > > COLUMN+CELL > > > > 000a > > column=v:f92acb5b-079a-42bc-913a-657f270a3dc1, timestamp=1432088038576, > > > value=\x08000aHf92acb5b-079a-42bc-913a-657f270a3dc1\x0EFAILURE\x0CNE-858\x > > > > > > > 140-0000-000\x02\x96\x01SXOAXTPSIUFPPNUCIEVQGCIZHCEJBKGWINHKIHFRHWHNATAHAHQBFRAYLOAMQEGKLNZIFM > > 000a > > 1 row(s) in 12.6720 seconds > > > > hbase(main):010:0> get 'sensors', '000a', {COLUMN => > > 'v:f92acb5b-079a-42bc-913a-657f270a3dc1'} > > COLUMN > > CELL > > > > v:f92acb5b-079a-42bc-913a-657f270a3dc1 > timestamp=1432088038576, > > > > > value=\x08000aHf92acb5b-079a-42bc-913a-657f270a3dc1\x0EFAILURE\x0CNE-858\x140-0000-000\x02\x96\x01SXOAXTPSIUFPPNUCIEVQGCI > > > > ZHCEJBKGWINHKIHFRHWHNATAHAHQBFRAYLOAMQEGKLNZIFM > > 000a > > > > 1 row(s) in 0.0280 seconds > > > > > > They both return the same result. However, the get returns in 28ms while > > the scan returns in 12672ms. > > > > How come can the scan be that slow? Is it normal? If I remove the QC from > > the scan, then it takes only 250ms to return all the columns. I think > > something is not correct. > > > > I'm running on 1.0.0-cdh5.4.0 so I guess it's the same for 1.0.x... > > > > JM > > >
