Hello Ilya,

thanks for reply.

For answer to your questions today i runned again a test that i stopped at
about 22 millions of entries:

a) the approximate hardware and data region config used in the test:

2 hosts each with:

Processor total  : 2

Processor: 0
        Name         : Intel Xeon
        Speed        : 3300 MHz
        Bus          : 100 MHz
        Core         : 8
        Thread       : 16
        Socket       : 1
        Level2 Cache : 2048 KBytes
        Level3 Cache : 25600 KBytes

Processor: 1
        Name         : Intel Xeon
        Stepping     : 4
        Speed        : 3300 MHz
        Bus          : 100 MHz
        Core         : 8
        Thread       : 16
        Socket       : 2
        Level2 Cache : 2048 KBytes
        Level3 Cache : 25600 KBytes

MEMORY:
Memory installed : 196608 MBytes

# getconf PAGESIZE: 4096

vm.swappiness = 5





Disk:

Cache Board Present: True
Cache Status: OK
Cache Ratio: 25% Read / 75% Write
Drive Write Cache: Disabled
Total Cache Size: 512 MB
Total Cache Memory Available: 304 MB

Logical Drive: 1
                Size: 279.4 GB
                Fault Tolerance: RAID 1
                Heads: 255
                Sectors Per Track: 32
                Cylinders: 65535
                Strip Size: 256 KB
                Full Stripe Size: 256 KB
                Status: OK
                Caching:  Enabled
                Rotational Speed: 15000
                PHY Transfer Rate: 6.0Gbps
                PHY Transfer Rate: 6.0Gbps
                type ext4
                Block size:  4096


>From the attached xml config the default data storage configuration is:


datafeed-persistent-store.xml
<http://apache-ignite-users.70518.x6.nabble.com/file/t2315/datafeed-persistent-store.xml>
  

<property name="maxSize" value="#{8L * 1024 * 1024 * 1024}"/>                   
                        
<property name="checkpointPageBufferSize" value="#{2048L * 1024 * 1024}" />


 About the memory below the top command for server and client nodes before
start test:




HOST_1



<http://apache-ignite-users.70518.x6.nabble.com/file/t2315/HOST1_top_preTest.png>
 

HOST_2

<http://apache-ignite-users.70518.x6.nabble.com/file/t2315/HOST2_top_preTest.png>
 

and below the top command for server and client nodes when test is stopped:

HOST_1

<http://apache-ignite-users.70518.x6.nabble.com/file/t2315/HOST1_top_postTest.png>
 

HOST_2

<http://apache-ignite-users.70518.x6.nabble.com/file/t2315/HOST2_top_postTest.png>
 


b) approximate size of data is 656 bytes
c) The size of db/ directory at about  22 millions is

For HOST_1:
6.7G    Work_1/
5.3G    Work_3/
6.3G    Work_5/
7.2G    Work_7/



For HOST_2:
6.5G    Work_2
6.5G    Work_4
6.6G    Work_6
5.9G    Work_8

Thanks,

Antonio





--
Sent from: http://apache-ignite-users.70518.x6.nabble.com/

Reply via email to