Hello, As Sebb suggested, I changed the setup as-
>>req1 >>req2 >>req3 >>req4 >>req5 >>req6 >>req7 >>Test Action (Action: Pause, Duration: 10secs). It's working perfectly fine. @Pratapi, the workaround you suggested is also working, but it was generating an additional sample for dummy sampler. On Tue, Sep 8, 2015 at 12:38 PM, Amit Kumar <[email protected]> wrote: > Thank you for your help guys, really appreciate. > > On Mon, Sep 7, 2015 at 8:37 PM, sebb <[email protected]> wrote: > >> On 7 September 2015 at 14:11, Pratapi Hemant Patel >> <[email protected]> wrote: >> > adding simply a constant timer will not serve the purpose as it >> introduces >> > delay within each requests. >> >> Timers are invoked before *all* samplers in scope, and are only >> invoked before samplers. >> >> > A workaround can be used >> > >> > Threadgroup >> >>>req 1 >> >>>req 2 >> >>>req 3 >> >>>req 4 >> >>>req 5 >> >>>req 6 >> >>>Simple Controller >> >>>>>constant timer >> >>>>>any dummy sampler (say debug sampler, or a http request sampler to a >> > dummy url) >> >> You don't need the Simple Controller. >> >> If you add the Timer as a child of a single sampler it will only be >> invoked before that sampler. >> >> Alternatively you can use the Test Sampler, which does not generate a >> sample, but can pause the test. >> >> > Thanks and Regards >> > Hemant >> > 9810752184 / 9013982184 >> > >> > On Mon, Sep 7, 2015 at 6:29 PM, Nirdesh Pachoriya <[email protected]> >> > wrote: >> > >> >> You can use constant timer which can help you to introduce the delay. >> >> >> >> Regards, >> >> Nirdesh M Pachoriya >> >> -----Original Message----- >> >> From: Amit Kumar [mailto:[email protected]] >> >> Sent: Monday, September 7, 2015 6:19 PM >> >> To: JMeter Users List >> >> Subject: How to add delay between Loops? >> >> >> >> Hello, >> >> >> >> I want to perform load testing for an application with following >> scenario: >> >> >> >> What I want to do is- >> >> >> >> I want to schedule a load test for 10 mins (loop count = forever), but >> >> after each loop, I need a pause of 10 secs. So, how to add pause >> between >> >> loops? Is it possible to do this in JMeter? >> >> >> >> My Thread Group setup is as follows: >> >> >> >> *Thread Properties:* >> >> Number of Threads: 100 >> >> Ram-up: 1 sec >> >> Loop Count: Forever >> >> >> >> *Scheduler:* >> >> Start Time: 2015/09/07 18:01:00 >> >> End Time: 2015/09/07 18:11:00 >> >> Duration: BLANK >> >> Startup Delay: BLANK >> >> >> >> And my Thread Group has 6 requests? >> >> >> >> -- >> >> Thanks and Regards, >> >> Amit >> >> "Legal Disclaimer: This electronic message and all contents contain >> >> information from Cybage Software Private Limited which may be >> privileged, >> >> confidential, or otherwise protected from disclosure. The information >> is >> >> intended to be for the addressee(s) only. If you are not an addressee, >> any >> >> disclosure, copy, distribution, or use of the contents of this message >> is >> >> strictly prohibited. If you have received this electronic message in >> error >> >> please notify the sender by reply e-mail to and destroy the original >> >> message and all copies. Cybage has taken every reasonable precaution to >> >> minimize the risk of malicious content in the mail, but is not liable >> for >> >> any damage you may sustain as a result of any malicious content in this >> >> e-mail. You should carry out your own malicious content checks before >> >> opening the e-mail or attachment." www.cybage.com >> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [email protected] >> For additional commands, e-mail: [email protected] >> >> > > > -- > Thanks and Regards, > Amit > -- Thanks and Regards, Amit
