I have a script to download a file. It works fine when the file size is below certain size. All 50 samplers are executed.
But when file size is large - in this particular test, 330 MB file - when the test plan execution is completed, I see that only 10 or so out of total 50 samplers show up in the View Result Tree. Does that mean 40 download did not occur? At first I thought 50 files were not saved onto my test machine when test plan finished was due to the fact that test plan exited before all the data could be written to disk files. However, when looking at the View Results Tree and only seeing 10+ of the total 50 samplers, it now looks like many of the samplers were not even executed. But why? Thread group is set up for 50 user, ramp period = 2 (I was mistaken here ... thinking 2 sec between each user but it's actually 2 sec for total of 50 user requests, so I have readjusted it to 50 seconds duration to achieve 1 sec/user rate, will retest to see ...). I put a Constant Timer which appears to be delay of submit between each # sampler, so #1 submitted (and timer start counting 60 sec) and during this 60 sec, all 50 #1 samplers are submitted. Then #75 gets submitted (all 50 of them), and 50 sec later, #17 samplers (50 times) are submitted, etc. So that means when we get to #24 samplers, I should expect to see all 50 of the #24 samplers to be there. So why did I see only 10+ #24 samplers, and end up with only 10+ actual downloaded files instead of all 50? Thank you Charles [cid:[email protected]] [cid:[email protected]]
