That doesn’t seem to be working all all…. I used the Nov 06 snapshot, unzipped 
the staff and started karaf.bat. Then I just typed features:install webconsole 
and nyt it’s just running there for 5 minutes and nothing happens…

IIRC, installing JUST the webconsole directly seems to be a bit iffy; I usually 
install at least jetty and war support before webconsole and after those the 
webconsole installed ok and took only few seconds.


-          Petri

From: jbonofre [via Karaf] [mailto:[email protected]]
Sent: 7. marraskuuta 2012 11:36
To: Riipinen Petri
Subject: Re: How to debug non-working war-deployment?

I guess that you try:
features:install war
features:install webconsole

Could you try to install directly the webconsole (without previous http
or war features installed):

features:install webconsole

I suspect an issue that I saw before.

Regards
JB

On 11/07/2012 08:01 AM, PJR69 wrote:

> Hi,
>
> Heh… ;) Ok, I feel a bit embarrassed now.. ;)
>
> Which snapshot would you recommend? I tried the two latest ones (Nov 06 and 
> Nov 07) and the 07 one doesn’t seem to even start and the 06 has some issues 
> with deploying the war, i.e. it won’t trigger Pax Web at all (there is no 
> Web-State for my war and nothing gets dumped into the log even with DEBUG 
> level set) and the Web Console doesn’t work at all. Not really keen on trying 
> out every one of them… ;)
>
>
> -          Petri
>
> From: jbonofre [via Karaf] [mailto:[hidden 
> email]</user/SendEmail.jtp?type=node&node=4026707&i=0>]
> Sent: 7. marraskuuta 2012 8:07
> To: Riipinen Petri
> Subject: Re: How to debug non-working war-deployment?
>
> Hi,
>
> Achim talked about Karaf 2.3.1-SNAPSHOT (which use Pax Web 1.1.5 (1.1.6
> soon, I'm updating ;))).
>
> You can find Karaf 2.3.1-SNAPSHOT here:
>
> https://repository.apache.org/content/groups/snapshots/org/apache/karaf/apache-karaf/2.3.1-SNAPSHOT/
>
> Regards
> JB
>
> On 11/07/2012 06:27 AM, PJR69 wrote:
>
>> Hi again,
>>
>> Ok, I’m prolly being a bit slow here but I’m trying to find 2.3.1-SNAPSHOT 
>> here: 
>> https://oss.sonatype.org/content/repositories/ops4j-snapshots/org/ops4j/pax/web/
>>  and can’t see it… Where do I find it?
>>
>>
>> -          Petri
>>
>> From: Achim Nierbeck [via Karaf] [mailto:[hidden 
>> email]</user/SendEmail.jtp?type=node&node=4026704&i=0>]
>> Sent: 6. marraskuuta 2012 21:31
>> To: Riipinen Petri
>> Subject: Re: How to debug non-working war-deployment?
>>
>> Hi,
>>
>> do you mind to test with the latest 2.3.1-SNAPSHOT, cause there had been an 
>> issue with Pax-Web [1]
>> which should be fixed by now.
>>
>> regards, Achim
>>
>> [1] - http://team.ops4j.org/browse/PAXWEB-426
>>
>> 2012/11/6 PJR69 <[hidden 
>> email]</user/SendEmail.jtp?type=node&node=4026701&i=0>>
>> Hi,
>>
>> Thanks for the advice, that helped me to progress a lot. Now it seems that 
>> my servlet looks to be deployed ok, but the context-mapping isn’t working 
>> for some reason or other.
>>
>> web:list shows one entry:
>> State = Active
>> Web-State = Deployed
>> Web-ContextPath = /portal
>>
>> But when I try to browse http://localhost:8181/portal I get HTTP error 404, 
>> not found.
>>
>> When I look at the log, I always get these kinds of entries:
>> Path [/portal] does not match any context.
>>
>> I’ve tried numerous different URL combinations there (like /portal/portal 
>> and /portal1/portal as portal1 is the name of the Karaf instance where the 
>> war is deployed) but nothing seems to work.
>>
>> In the manifest I have Web-ContextPath: portal so AFAIU, the application 
>> should be on the above URL.
>>
>> I’m trying to follow the infor here 
>> http://leshazlewood.com/2010/09/08/osgi-maven-pax-and-web-applications/ as 
>> much as possible, but I don’t have any jsp-pages there. The main servlet is 
>> mapped just on /
>>
>> So, AFAIU, Karaf + Pax seem to deploy my OSGIfied WAR-bundle ok, no errors 
>> on log at least, but for some reason the main servlet inside the war just 
>> can’t be reached via the URL that I’d assume it should be.
>>
>> Any ideas how to proceed would be greatly appreciated…
>>
>>
>> -          Petri
>>
>>
>> From: Achim Nierbeck [via Karaf] [mailto:[hidden 
>> email]</user/SendEmail.jtp?type=node&node=4026701&i=1>]
>> Sent: 5. marraskuuta 2012 15:50
>> To: Riipinen Petri
>> Subject: Re: How to debug non-working war-deployment?
>> Hi,
>>
>> which version of Karaf do you use?
>> Second, what does the karaf.log say?
>>
>> How does your war look like, did you add the required OSGi-Manifest entries 
>> to it?
>> if not, you need to install it with
>> install -s webbundle:mvn:url
>>
>> What does the web:list command list when used?
>>
>> Besides that if you want to debug, you should start Karaf in debug mode by 
>> using
>> "karaf.sh debug" (or "karaf.bat debug" on windows) on comandline.
>>
>> The sources for the web-extender can be found at OPS4j Pax-Web, see [1] to 
>> [3]
>>
>> regards, Achim
>>
>> [1] - 
>> http://team.ops4j.org/wiki/display/ops4j/Open+Participation+Software+for+Java
>> [2] - http://team.ops4j.org/wiki/display/paxweb/Pax+Web
>> [3] - https://github.com/ops4j/org.ops4j.pax.web
>> 2012/11/5 PJR69 <[hidden 
>> email]</user/SendEmail.jtp?type=node&node=4026686&i=0>>
>> I have a WAR-packaged application that runs fine on Tomcat.
>>
>> Now I'm trying to get it to run on Karaf with jetty. I've installed jetty +
>> war features and I see jetty running on 8181 and get the page not found
>> error when browsing the root.
>>
>> I've osgified my manifest as instructed here:
>> http://team.ops4j.org/wiki/display/paxweb/OSGi-fy+your+WAR and to me it
>> looks ok.
>>
>> But when I drop the WAR into the deploy-folder, nothing much really happens.
>> I do see the installer writing "installed... .war" -text and list shows that
>> the application is there in Installed-state. But nothing else happens.
>>
>> The application should be bound to /portal-endpoint but navigating there
>> with a browser just gives the same page not found error and nothing gets
>> output on the log.
>>
>> Any ideas how to proceed with debugging the problem?
>>
>>
>>
>> --
>> View this message in context: 
>> http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682.html
>> Sent from the Karaf - User mailing list archive at Nabble.com.
>>
>>
>>
>> --
>>
>> Apache Karaf <http://karaf.apache.org/> Committer & PMC
>> OPS4J Pax Web <http://wiki.ops4j.org/display/paxweb/Pax+Web/> Committer & 
>> Project Lead
>> OPS4J Pax for Vaadin <http://team.ops4j.org/wiki/display/PAXVAADIN/Home> 
>> Commiter & Project Lead
>> blog <http://notizblog.nierbeck.de/>
>> ________________________________
>> If you reply to this email, your message will be added to the discussion 
>> below:
>> http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682p4026686.html
>> To start a new topic under Karaf - User, email [hidden 
>> email]</user/SendEmail.jtp?type=node&node=4026701&i=2><mailto:[hidden 
>> email]</user/SendEmail.jtp?type=node&node=4026701&i=3<mailto:[hidden%20email]%3c/user/SendEmail.jtp?type=node&node=4026701&i=3<mailto:[hidden%20email]%3c/user/SendEmail.jtp?type=node&node=4026701&i=3%3cmailto:%5bhidden%20email%5d%3c/user/SendEmail.jtp?type=node&node=4026701&i=3>>>>
>> To unsubscribe from Karaf - User, click here< 
>> NAML<http://karaf.922171.n3.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>>
>>
>>
>> --
>> View this message in context: 
>> http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682p4026700.html
>> Sent from the Karaf - User mailing list archive at Nabble.com.
>>
>>
>>
>> --
>>
>> Apache Karaf <http://karaf.apache.org/> Committer & PMC
>> OPS4J Pax Web <http://wiki.ops4j.org/display/paxweb/Pax+Web/> Committer & 
>> Project Lead
>> OPS4J Pax for Vaadin <http://team.ops4j.org/wiki/display/PAXVAADIN/Home> 
>> Commiter & Project Lead
>> blog <http://notizblog.nierbeck.de/>
>>
>> ________________________________
>> If you reply to this email, your message will be added to the discussion 
>> below:
>> http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682p4026701.html
>> To start a new topic under Karaf - User, email [hidden 
>> email]</user/SendEmail.jtp?type=node&node=4026704&i=1><mailto:[hidden 
>> email]</user/SendEmail.jtp?type=node&node=4026704&i=2<mailto:[hidden%20email]%3c/user/SendEmail.jtp?type=node&node=4026704&i=2>>>
>> To unsubscribe from Karaf - User, click here<
>> NAML<http://karaf.922171.n3.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>>
>>
>>
>>
>> --
>> View this message in context: 
>> http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682p4026703.html
>> Sent from the Karaf - User mailing list archive at Nabble.com.
>>
>
> --
> Jean-Baptiste Onofré
> [hidden email]</user/SendEmail.jtp?type=node&node=4026704&i=3>
> http://blog.nanthrax.net
> Talend - http://www.talend.com
>
> ________________________________
> If you reply to this email, your message will be added to the discussion 
> below:
> http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682p4026704.html
> To start a new topic under Karaf - User, email [hidden 
> email]</user/SendEmail.jtp?type=node&node=4026707&i=1><mailto:[hidden 
> email]</user/SendEmail.jtp?type=node&node=4026707&i=2>>
> To unsubscribe from Karaf - User, click here<
> NAML<http://karaf.922171.n3.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>
>
>
>
> --
> View this message in context: 
> http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682p4026705.html
> Sent from the Karaf - User mailing list archive at Nabble.com.
>

--
Jean-Baptiste Onofré
[hidden email]</user/SendEmail.jtp?type=node&node=4026707&i=3>
http://blog.nanthrax.net
Talend - http://www.talend.com

________________________________
If you reply to this email, your message will be added to the discussion below:
http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682p4026707.html
To start a new topic under Karaf - User, email 
[email protected]<mailto:[email protected]>
To unsubscribe from Karaf - User, click 
here<http://karaf.922171.n3.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=930749&code=cGV0cmkucmlpcGluZW5AaW5zdGEuZml8OTMwNzQ5fDU5NTY5OTMzOA==>.
NAML<http://karaf.922171.n3.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>




--
View this message in context: 
http://karaf.922171.n3.nabble.com/How-to-debug-non-working-war-deployment-tp4026682p4026708.html
Sent from the Karaf - User mailing list archive at Nabble.com.

Reply via email to