Hello,
i debugged a bit and it looks like that die file installer is started
before the artifact listeners are added.
During processing these files are added to the processingFailures list.
This list is reprocessed everytime and has a retry, but only if at least
one file is changed see
public void run() {
...
Set<File> files = this.scanner.scan(false);
if (!files.isEmpty()) { //<- this was if (files != null) in
3.6.8 and has changed and causing the problem
this.process(files);
}
...
How could i enforce that my fileinstaller is added after my artifact
liesternes (also after blueprint listener is added)
Best regards,
Matthias
Am Mo., 27. Sept. 2021 um 17:55 Uhr schrieb Matthias Leinweber <
[email protected]>:
> Sure ..shared desktop or github project (depends on 2 other github
> projects not in maven central yet)
>
> Best regards,
> Matthias
>
> Am Mo., 27. Sept. 2021 um 17:09 Uhr schrieb Jean-Baptiste Onofré <
> [email protected]>:
>
>> OK, maybe it's due to your custom distro.
>>
>> Any chance I can check your distro ?
>>
>> Regards
>> JB
>>
>> On 27/09/2021 16:49, Matthias Leinweber wrote:
>> > I tested it with the downloaded karaf binary distribution and it works.
>> > With a custom distribution there seems to be a problem. I tested with
>> my
>> > own as well as with the custom dynamic dist from examples. Pls test it
>> > with a xml file not only with cfg+jar.
>> >
>> > br,
>> > Matthias
>> >
>> > Am Mo., 27. Sept. 2021 um 15:04 Uhr schrieb Jean-Baptiste Onofré
>> > <[email protected] <mailto:[email protected]>>:
>> >
>> > Thanks Matthias,
>> >
>> > I have basically similar, let me try on a fresh install.
>> >
>> > Regards
>> > JB
>> >
>> > On 27/09/2021 15:00, Matthias Leinweber wrote:
>> > > Hello JB,
>> > >
>> > > Linux 5.13.19-2-MANJARO on ext4
>> > >
>> > > Br,
>> > > Matthias
>> > >
>> > > Am Mo., 27. Sept. 2021 um 14:50 Uhr schrieb Jean-Baptiste Onofré
>> > > <[email protected] <mailto:[email protected]> <mailto:
>> [email protected]
>> > <mailto:[email protected]>>>:
>> > >
>> > > Hi Matthias,
>> > >
>> > > what's your OS and environment ?
>> > >
>> > > It seems to work fine to me: I added a new fileinstall
>> > factory pid and
>> > > it's deploying from there.
>> > >
>> > > Regards
>> > > JB
>> > >
>> > > On 27/09/2021 14:38, Matthias Leinweber wrote:
>> > > > I also tried to add a config file
>> > > (org.apache.felix.fileinstall-foo.cfg)
>> > > > into the etc folder before first startup, But also no
>> success.
>> > > >
>> > > > Br,
>> > > > Matthias
>> > > >
>> > > > Am Fr., 24. Sept. 2021 um 10:28 Uhr schrieb Jean-Baptiste
>> > Onofré
>> > > > <[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>
>> > <mailto:[email protected] <mailto:[email protected]>
>> > > <mailto:[email protected] <mailto:[email protected]>>>>:
>> > > >
>> > > > I think you have a race condition: fileinstall is
>> > installed by
>> > > > startup.properties, and you provide the config via
>> > features
>> > > core which
>> > > > come later in the bootstrap.
>> > > >
>> > > > Let me try a startup like this and get back to you.
>> > > > I keep you posted.
>> > > >
>> > > > Regards
>> > > > JB
>> > > >
>> > > > On 24/09/2021 09:27, Matthias Leinweber wrote:
>> > > > > Hello,
>> > > > >
>> > > > > Does not work for us. In our assembly we add a boot
>> > feature
>> > > > containing:
>> > > > >
>> > > > > <config
>> name="org.apache.felix.fileinstall-camel">
>> > > > > felix.fileinstall.dir =
>> > ${env:CAMEL_PATH:-/deploy/}
>> > > > > felix.fileinstall.filter =
>> .*\\.(xml|cfg|groovy)
>> > > > > felix.fileinstall.poll = 1000
>> > > > > felix.fileinstall.start.level = 80
>> > > > > felix.fileinstall.active.level = 80
>> > > > > felix.fileinstall.log.level = 3
>> > > > > </config>
>> > > > >
>> > > > > The content of this fileinstaller does not get
>> > processed
>> > > on the
>> > > > first
>> > > > > system start. After restart it's fine, but not a
>> viable
>> > > option. I
>> > > > tired
>> > > > > start+active @ 60,80,100 + start@100 active@80. As
>> > well as
>> > > > disable nio2.
>> > > > > In all cases I need to touch a file to make it
>> working.
>> > > > >
>> > > > > br,
>> > > > > Matthias
>> > > > >
>> > > > > Am Do., 23. Sept. 2021 um 21:05 Uhr schrieb Paul
>> Fraser
>> > > > > <[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>
>> > > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>>>:
>> > > > >
>> > > > > Yes, running without clean works OK in my case.
>> > > > >
>> > > > > Paul Fraser
>> > > > >
>> > > > > On 23/9/21 6:45 pm, Jean-Baptiste Onofré wrote:
>> > > > > > I guess it works fine without the clean arg
>> > right ?
>> > > > > >
>> > > > > > Regards
>> > > > > > JB
>> > > > > >
>> > > > > > On 22/09/2021 13:15, Jesse White wrote:
>> > > > > >> We're hitting a similar problem with the
>> > deploy/
>> > > folder
>> > > > and can
>> > > > > >> reproduce with a vanilla distribution of
>> > Karaf 4.3.3.
>> > > > > >>
>> > > > > >> On Mac OS w/ JDK 11:
>> > > > > >>
>> > > > > >> tar zxvf apache-karaf-4.3.3.tar.gz &&
>> > > > cd apache-karaf-4.3.3
>> > > > > >> cp /tmp/confd-telemetry-feature.xml
>> deploy/
>> > > > > >> ./bin/karaf clean
>> > > > > >>
>> > > > > >> karaf@root()> feature:info
>> > confd-telemetry-auto
>> > > > > >> Feature not found
>> > > > > >>
>> > > > > >> Similar test with Karaf 4.3.2 shows:
>> > > > > >>
>> > > > > >> karaf@root()> feature:info
>> > confd-telemetry-auto
>> > > > > >> Feature confd-telemetry-auto 1.0.0
>> > > > > >> Feature configuration:
>> > > > > >>
>> > > >
>> org.opennms.features.telemetry.listeners-single-port-flows
>> > > > > >>
>> > > org.opennms.features.telemetry.listeners-JTI-Listener
>> > > > > >>
>> > > org.opennms.features.telemetry.listeners-NXOS-Listener
>> > > > > >> ...
>> > > > > >>
>> > > > > >> Here's a reference to the feature file in
>> > question:
>> > > > > >>
>> > > >
>> > https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>>
>> > > >
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> >>>
>> > > > >
>> > > >
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>>
>> > > >
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> >>>>
>> > > > > >>
>> > > > >
>> > > >
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>>
>> > > >
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> >>>
>> > > > >
>> > > >
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>>
>> > > >
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b>
>> > >
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> > <https://gist.github.com/j-white/1574f34cb94dc2d9166ae9805bd4ba3b
>> >>>>>
>> > > > > >>
>> > > > > >> Thanks for all the effort in maintaining
>> the
>> > > distribution
>> > > > - looking
>> > > > > >> forward to getting R7 up and running with
>> > JDK 17!
>> > > > > >>
>> > > > > >> Best,
>> > > > > >> Jesse
>> > > > > >>
>> > > > >
>> > > >
>> > >
>> >
>> ------------------------------------------------------------------------
>> > > > > >> *From:* Jean-Baptiste Onofre
>> > <[email protected] <mailto:[email protected]>
>> > > <mailto:[email protected] <mailto:[email protected]>>
>> > > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>
>> > > > > <mailto:[email protected]
>> > <mailto:[email protected]> <mailto:[email protected]
>> > <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>>>
>> > > > > >> *Sent:* Tuesday, September 21, 2021 9:39 AM
>> > > > > >> *To:* [email protected]
>> > <mailto:[email protected]>
>> > > <mailto:[email protected] <mailto:[email protected]
>> >>
>> > > > <mailto:[email protected]
>> > <mailto:[email protected]> <mailto:[email protected]
>> > <mailto:[email protected]>>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>
>> > > > <mailto:[email protected]
>> > <mailto:[email protected]> <mailto:[email protected]
>> > <mailto:[email protected]>>>>
>> > > > > <[email protected]
>> > <mailto:[email protected]> <mailto:[email protected]
>> > <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>
>> > > > <mailto:[email protected]
>> > <mailto:[email protected]> <mailto:[email protected]
>> > <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>>>
>> > > > > >> *Subject:* Re: FileInstaller with 4.3.3
>> > > > > >> WARNING: This email originated outside of
>> > NantHealth.
>> > > > > >> DO NOT CLICK links or attachments unless
>> you
>> > > recognize the
>> > > > > sender and
>> > > > > >> are expecting this email.
>> > > > > >> ________________________________
>> > > > > >>
>> > > > > >> Yes, I tried both, no clean, clean as
>> argument,
>> > > clean in
>> > > > > >> config.properties.
>> > > > > >>
>> > > > > >> All works fine.
>> > > > > >>
>> > > > > >> Can you share some details about your test
>> > case and
>> > > > environment
>> > > > > >> (especially if you are on Windows or Unix)
>> ?
>> > > > > >>
>> > > > > >> Regards
>> > > > > >> JB
>> > > > > >>
>> > > > > >>> Le 21 sept. 2021 à 15:00, Matthias
>> Leinweber
>> > > > > >>> <[email protected]
>> > <mailto:[email protected]>
>> > > <mailto:[email protected]
>> > <mailto:[email protected]>>
>> > > > <mailto:[email protected]
>> > <mailto:[email protected]>
>> > > <mailto:[email protected]
>> > <mailto:[email protected]>>>
>> > > > > <mailto:[email protected]
>> > <mailto:[email protected]>
>> > > <mailto:[email protected]
>> > <mailto:[email protected]>>
>> > > > <mailto:[email protected]
>> > <mailto:[email protected]>
>> > > <mailto:[email protected]
>> > <mailto:[email protected]>>>>> a écrit :
>> > > > > >>>
>> > > > > >>> For me it's a custom dist. Did you do a
>> > clean start?
>> > > > > >>>
>> > > > > >>> Am Di., 21. Sept. 2021 um 14:28 Uhr
>> schrieb
>> > > > Jean-Baptiste Onofre
>> > > > > >>> <[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>
>> > > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>>>:
>> > > > > >>> Hi,
>> > > > > >>>
>> > > > > >>> I did several test and it works fine for
>> me.
>> > > > > >>>
>> > > > > >>> Here’s the very simplest test:
>> > > > > >>>
>> > > > > >>> - Starting from Karaf 4.3.3 vanilla
>> > > > > >>> - I put commons-lang-2.6.jar in the deploy
>> > folder
>> > > (while
>> > > > Karaf is
>> > > > > >>> stopped)
>> > > > > >>> - then, I’m starting Karaf with bin/karaf
>> > > > > >>> - When I checked the bundle:list:
>> > > > > >>>
>> > > > > >>> 54 │ Active │ 10 │ 2.6.7 │
>> > OPS4J
>> > > Pax Url
>> > > > - wrap:
>> > > > > >>> 55 │ Active │ 80 │ 2.6 │
>> > > Commons Lang
>> > > > > >>>
>> > > > > >>> So, you can see commons-lang installed and
>> > active,
>> > > > meaning the
>> > > > > >>> deployers deployed it from the deploy
>> folder.
>> > > > > >>>
>> > > > > >>> It works for me.
>> > > > > >>>
>> > > > > >>> Can you elaborate a bit your test case ?
>> > > > > >>> Is it a custom distribution ?
>> > > > > >>>
>> > > > > >>> Regards
>> > > > > >>> JB
>> > > > > >>>
>> > > > > >>> > Le 20 sept. 2021 à 08:29, Paul Fraser
>> > > > <[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>
>> > > > > <mailto:[email protected]
>> > <mailto:[email protected]> <mailto:[email protected]
>> > <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>>> a écrit :
>> > > > > >>> >
>> > > > > >>> > Hi JB,
>> > > > > >>> >
>> > > > > >>> > Any result on this check?
>> > > > > >>> >
>> > > > > >>> > Paul Fraser
>> > > > > >>> >
>> > > > > >>> > On 17/9/21 9:55 pm, JB Onofré wrote:
>> > > > > >>> >> I checked etc I will check deploy now.
>> > > > > >>> >>
>> > > > > >>> >> Regards
>> > > > > >>> >> JB
>> > > > > >>> >>
>> > > > > >>> >>> Le 17 sept. 2021 à 12:29, Paul Fraser
>> > > > <[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>
>> > > > > <mailto:[email protected]
>> > <mailto:[email protected]> <mailto:[email protected]
>> > <mailto:[email protected]>>
>> > > <mailto:[email protected] <mailto:[email protected]>
>> > <mailto:[email protected] <mailto:[email protected]>>>>> a écrit :
>> > > > > >>> >>>
>> > > > > >>> >>> Hi JB,
>> > > > > >>> >>>
>> > > > > >>> >>> In my case the problem occurs using
>> the
>> > > deploy folder.
>> > > > > >>> >>>
>> > > > > >>> >>> Exact same code in 4.3.2 works, 4.3.3
>> > does not
>> > > > install the
>> > > > > >>> deploy folder files.
>> > > > > >>> >>>
>> > > > > >>> >>> Paul
>> > > > > >>> >>>
>> > > > > >>> >>>> On 17/9/21 7:04 pm, Jean-Baptiste
>> > Onofré wrote:
>> > > > > >>> >>>> Hi,
>> > > > > >>> >>>>
>> > > > > >>> >>>> did you updated the etc location in
>> > > > etc/config.properties (in
>> > > > > >>> the felix.fileinstall.dir property) ?
>> > > > > >>> >>>>
>> > > > > >>> >>>> I just tried and it works fine for
>> > me. Here's my
>> > > > test case:
>> > > > > >>> >>>>
>> > > > > >>> >>>> 1. I created etc/my.config.cfg
>> containing
>> > > foo=bar
>> > > > > >>> >>>> 2. I'm starting karaf
>> > > > > >>> >>>> 3. I can see the config loaded:
>> > > > > >>> >>>>
>> > > > > >>> >>>> karaf@root()> config:list
>> > > "(service.pid=my.config)"
>> > > > > >>> >>>>
>> > > > > >>> >>>>
>> > > > > >>> >>>>
>> > > > > >>> >>>>
>> > > > > >>> >>>>
>> > > > >
>> > >
>> > ----------------------------------------------------------------
>> > > > > >>> >>>> Pid: my.config
>> > > > > >>> >>>> BundleLocation: ?
>> > > > > >>> >>>> Properties:
>> > > > > >>> >>>> felix.fileinstall.filename =
>> > > > > >>>
>> > > > >
>> > > >
>> > >
>> >
>>
>> file:/home/jbonofre/Workspace/karaf/assemblies/apache-karaf/target/apache-karaf-4.3.4-SNAPSHOT/etc/my.config.cfg
>> > > > > >>> >>>> foo = bar
>> > > > > >>> >>>> service.pid = my.config
>> > > > > >>> >>>>
>> > > > > >>> >>>> Can you share your test case ?
>> > > > > >>> >>>>
>> > > > > >>> >>>> Regards
>> > > > > >>> >>>> JB
>> > > > > >>> >>>>
>> > > > > >>> >>>>
>> > > > > >>> >>>>
>> > > > > >>> >>>>> On 16/09/2021 14:31, Matthias
>> > Leinweber wrote:
>> > > > > >>> >>>>> Hello,
>> > > > > >>> >>>>>
>> > > > > >>> >>>>> I am having a strange issue after I
>> > updated my
>> > > > assembly to
>> > > > > >>> 4.3.3. I am using a custom file installer
>> > > location which
>> > > > I deploy
>> > > > > >>> with a feature.
>> > > > > >>> >>>>>
>> > > > > >>> >>>>> The strange thing is that the folder
>> > is not
>> > > processed
>> > > > > >>> automatically at startup, but if I touch a
>> > single
>> > > file
>> > > > in the
>> > > > > folder
>> > > > > >>> all others files get processed as well.
>> > > > > >>> >>>>>
>> > > > > >>> >>>>> Any ideas?
>> > > > > >>> >>>>>
>> > > > > >>> >>>>> br,
>> > > > > >>> >>>>> Matthias
>> > > > > >>>
>> > > > > >>>
>> > > > > >>>
>> > > > > >>>
>> > > > > >>
>> > > > > >>
>> > > > > >> CONFIDENTIALITY NOTICE
>> > > > > >> This e-mail message and any
>> > attachments are
>> > > > only for
>> > > > > the use
>> > > > > >> of the intended recipient and may
>> > contain
>> > > > information
>> > > > > that is
>> > > > > >> privileged, confidential or
>> > exempt from
>> > > > disclosure under
>> > > > > >> applicable law. If you are not
>> > the intended
>> > > > recipient, any
>> > > > > >> disclosure, distribution or other
>> > use of
>> > > this
>> > > > e-mail
>> > > > > message
>> > > > > >> or attachments is prohibited. If
>> you
>> > > have received
>> > > > > this e-mail
>> > > > > >> message in error, please delete
>> and
>> > > notify the
>> > > > sender
>> > > > > >> immediately. Thank you.
>> > > > > >>
>> > > > >
>> > > > >
>> > > > >
>> > > > >
>> > > >
>> > > >
>> > > >
>> > >
>> > >
>> >
>> >
>> >
>>
>
>
>
>
