Hi all, I have some 2 GB of data and tried to execute RF with no of trees = 10 and maxsplitsize as 90 MB. The execution takes too much time. I have also tried with #of trees =2, then it takes less time but gives accuracy <50% If I use less data with greater no of trees , then output accuracy is >90%
Is there any tuning to execute it quickly with optimal no of trees for accuracy > 80%. Please suggest Thanks Stuti Awasthi ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------
