Hi Erlend, Are you sure the "Start method" (on the Connection tab) says "Start automatically"? Without that the job will not run.
There is a time field in the database table that describes jobs, which has the time it last checked if the job should be run. What ManifoldCF does is: - start with the last time the job was checked - Move that time forward to the current time, and see if there is any matching time in between that corresponds to the schedule - Run the job if a matching time was found So if you can't find anything wrong in the job in the UI, you might want to have a look at the jobs table to see what the time of last check was; it may have been messed up somehow if you were playing with things. Karl On Fri, May 24, 2013 at 9:20 AM, Erlend Garåsen <[email protected]>wrote: > > Even though all my three jobs are configured to start automatically at a > specific time, they're not. This behavour seems to have occurred after I > manually removed all the schedules due to temporary problems and later > added them again. > > Why? Something I haven't understood? > > Here's a screenshot of one of my job settings. This is the second time MCF > is ignoring the scheduled time for this particular job: > http://folk.uio.no/erlendfg/**manifoldcf/scheduled_time.png<http://folk.uio.no/erlendfg/manifoldcf/scheduled_time.png> > > As you can see, the job should run every Thursday at 6pm, but this is the > second time it ignores this setting. > > If I look in "Status and Job Management", the start and end time for this > job are Tue May 14 14:23:06 CEST 2013 and Tue May 14 14:24:45 CEST 2013 > respectively, that is, the time when I manually started this job last time. > But no activity since then. > > Erlend > > -- > Erlend Garåsen > Center for Information Technology Services > University of Oslo > P.O. Box 1086 Blindern, N-0317 OSLO, Norway > Ph: (+47) 22840193, Fax: (+47) 22852970, Mobile: (+47) 91380968, VIP: > 31050 >
