Hello,
I am just installing and trying out midgard for the first time. Everything
seemed to compile and install fine on my Redhat 7.1 box. However, when I
try to access the asgard page, I get the contents of the php file in the
window. Before installing midgard, php worked fine.
I have php installed as both a binary CGI and an apache module. I don't
know if it's related, but when I try to invoke php from the command line I
get the error:
"php: error while loading shared libraries: /usr/lib/php4/midgard.so:
undefined symbol: ap_find_linked_module"
I realize that this _might_ be because it is not running as the apache
module when invoked this way, but I wasn't sure.
I have attached the sontents of my httpd.conf and php.ini files; if you
need others, let me know.
Thanks in advance for any help.
--
Regards,
John Wilger
Senior Partner/CEO
Dotted-Quad Design Studio
[EMAIL PROTECTED]
513.544.7309
Visit our web site at http://www.dqdstudio.com
[PHP]
;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; This file controls many aspects of PHP's behavior. In order for PHP to
; read it, it must be named 'php.ini'. PHP looks for it in the current
; working directory, in the path designated by the environment variable
; PHPRC, and in the path that was defined in compile time (in that order).
; Under Windows, the compile-time path is the Windows directory. The
; path in which the php.ini file is looked for can be overriden using
; the -c argument in command line mode.
;
; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
;
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
;
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
;
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
;
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
;
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
;
; foo = ; sets foo to an empty string
; foo = none ; sets foo to an empty string
; foo = "none" ; sets foo to the string 'none'
;
; If you use constants in your value, and these constants belong to a dynamically
; loaded extension (either a PHP extension or a Zend extension), you may only
; use these constants *after* the line that loads the extension.
;
; All the values in the php.ini-dist file correspond to the builtin
; defaults (that is, if no php.ini is used, or if you delete these lines,
; the builtin defaults will be identical).
;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;
engine = On ; Enable the PHP scripting language engine
under Apache
short_open_tag = On ; allow the <? tag. otherwise, only <?php and
<script> tags are recognized.
asp_tags = Off ; allow ASP-style <% %> tags
precision = 14 ; number of significant digits displayed in
floating point numbers
y2k_compliance = Off ; whether to be year 2000 compliant (will cause
problems with non y2k compliant browsers)
output_buffering = Off ; Output buffering allows you to send header lines
(including cookies)
; even after you send body
content, in the price of slowing PHP's
; output layer a bit.
; You can enable output
buffering by in runtime by calling the output
; buffering functions, or
enable output buffering for all files
; by setting this directive to
On.
output_handler = ; You can redirect all of the output of your
scripts to a function,
; that can be responsible to
process or log it. For example,
; if you set the
output_handler to "ob_gzhandler", than output
; will be transparently
compressed for browsers that support gzip or
; deflate encoding. Setting
an output handler automatically turns on
; output buffering.
implicit_flush = Off ; Implicit flush tells PHP to tell the output layer to
flush itself
; automatically after every
output block. This is equivalent to
; calling the PHP function
flush() after each and every call to print()
; or echo() and each and every
HTML block.
; Turning this option on has
serious performance implications, and
; is generally recommended for
debugging purposes only.
allow_call_time_pass_reference = On ; whether to enable the ability to force
arguments to be
;
passed by reference at function-call time. This method
; is
deprecated, and is likely to be unsupported in future
;
versions of PHP/Zend. The encouraged method of specifying
;
which arguments should be passed by reference is in the
;
function declaration. You're encouraged to try and
; turn
this option Off, and make sure your scripts work
;
properly with it, to ensure they will work with future
;
versions of the language (you will receive a warning
; each
time you use this feature, and the argument will
; be
passed by value instead of by reference).
; Safe Mode
safe_mode = Off
safe_mode_exec_dir =
safe_mode_allowed_env_vars = PHP_ ; Setting
certain environment variables
; may be a potential security breach.
; This directive contains a comma-delimited
; list of prefixes. In Safe Mode, the
; user may only alter environment
; variables whose names begin with the
; prefixes supplied here.
; By default, users will only be able
; to set environment variables that begin
; with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP
; will let the user modify ANY environment
; variable!
safe_mode_protected_env_vars = LD_LIBRARY_PATH ; This directive contains a
comma-
; delimited list of environment variables,
; that the end user won't be able to
; change using putenv().
; These variables will be protected
; even if safe_mode_allowed_env_vars is
; set to allow to change them.
disable_functions =
; This directive allows you to disable certain
; functions for security reasons. It receives
; a comma separated list of function names.
; This directive is *NOT* affected by whether
; Safe Mode is turned on or off.
; Colors for Syntax Highlighting mode. Anything that's acceptable in <font color=???>
would work.
highlight.string = #DD0000
highlight.comment = #FF8000
highlight.keyword = #007700
highlight.bg = #FFFFFF
highlight.default = #0000BB
highlight.html = #000000
; Misc
expose_php = On ; Decides whether PHP may expose the fact that
it is installed on the
; server (e.g., by adding its
signature to the Web server header).
; It is no security threat in any way,
but it makes it possible
; to determine whether you use PHP on
your server or not.
;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;
max_execution_time = 30 ; Maximum execution time of each script, in seconds
memory_limit = 8M ; Maximum amount of memory a script may
consume (8MB)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; error_reporting is a bit-field. Or each number up to get desired error reporting
level
; E_ALL - All errors and warnings
; E_ERROR - fatal run-time errors
; E_WARNING - run-time warnings (non fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often
result from a bug in
; your code, but it's possible that it was
intentional (e.g., using an
; uninitialized variable and relying on the
fact it's automatically
; initialized to an empty string)
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non fatal errors) that occur during PHP's initial
startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; Examples:
; error_reporting = E_ALL & ~E_NOTICE ; show
all errors, except for notices
; error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR ; show only errors
error_reporting = E_ALL & ~E_NOTICE ; Show all errors except for
notices
display_errors = On ; Print out errors (as a part of the output)
; For production web sites, you're
strongly encouraged
; to turn this feature off, and use
error logging instead (see below).
; Keeping display_errors enabled on a
production web site may reveal
; security information to end users,
such as file paths on your Web server,
; your database schema or other
information.
display_startup_errors = Off ; Even when display_errors is on, errors that
occur during
; PHP's
startup sequence are not displayed. It's strongly
; recommended
to keep display_startup_errors off, except for
; when
debugging.
log_errors = Off ; Log errors into a log file (server-specific
log, stderr, or error_log (below))
; As stated above, you're strongly
advised to use error logging in place of
; error displaying on production web
sites.
track_errors = Off ; Store the last error/warning message in
$php_errormsg (boolean)
;error_prepend_string = "<font color=ff0000>" ; string to output before an error
message
;error_append_string = "</font>" ; string to output after an error
message
;error_log = filename ; log errors to specified file
;error_log = syslog ; log errors to syslog (Event Log on NT, not
valid in Windows 95)
warn_plus_overloading = Off ; warn if the + operator is used with
strings
;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;
; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
variables_order = "EGPCS" ; This directive describes the order in which
PHP registers
; GET, POST, Cookie,
Environment and Built-in variables (G, P,
; C, E & S
respectively, often referred to as EGPCS or GPC).
; Registration is done
from left to right, newer values override
; older values.
register_globals = On ; Whether or not to register the EGPCS
variables as global
; variables. You may
want to turn this off if you don't want
; to clutter your
scripts' global scope with user data. This makes
; most sense when
coupled with track_vars - in which case you can
; access all of the
GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your
best to write your scripts so that they do
; not require
register_globals to be on; Using form variables
; as globals can
easily lead to possible security problems, if
; the code is not very
well thought of.
register_argc_argv = On ; This directive tells PHP whether to
declare the argv&argc
; variables (that
would contain the GET information). If you
; don't use these
variables, you should turn it off for
; increased
performance
post_max_size = 8M ; Maximum size of POST data that PHP
will accept.
gpc_order = "GPC" ; This directive is deprecated. Use
variables_order instead.
; Magic quotes
magic_quotes_gpc = On ; magic quotes for incoming
GET/POST/Cookie data
magic_quotes_runtime= Off ; magic quotes for runtime-generated data,
e.g. data from SQL, from exec(), etc.
magic_quotes_sybase = Off ; Use Sybase-style magic quotes
(escape ' with '' instead of \')
; automatically add files before or after any PHP document
auto_prepend_file =
auto_append_file =
; As of 4.0b4, PHP always outputs a character encoding by default in
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
default_mimetype = "text/html"
;default_charset = "iso-8859-1"
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
include_path = ".:/usr/share/php" ; UNIX:
"/path1:/path2" Windows: "\path1;\path2"
doc_root = ; the root of the php
pages, used only if nonempty
user_dir = ; the directory under
which php opens the script using /~username, used only if nonempty
extension_dir = /usr/lib/php4 ; directory in which
the loadable extensions (modules) reside
enable_dl = On ; Whether or not to enable the
dl() function.
; The dl()
function does NOT properly work in multithreaded
; servers,
such as IIS or Zeus, and is automatically disabled
; on them.
;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;
file_uploads = On ; Whether to allow HTTP file uploads
;upload_tmp_dir = ; temporary directory for HTTP uploaded files
(will use system default if not specified)
upload_max_filesize = 2M ; Maximum allowed size for uploaded files
;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;
allow_url_fopen = On ; Wheter to allow trating URLs like http:... or
ftp:... like files
;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;
; if you wish to have an extension loaded automaticly, use the
; following syntax: extension=modulename.extension
; Note that it should be the name of the module only, no directory information
; needs to go here. Specify the location of the extension with the extension_dir
directive above.
;extension=cpdf.so
;extension=cybercash.so
;extension=db.so
;extension=dbase.so
;extension=domxml.so
;extension=dotnet.so
;extension=exif.so
;extension=fdf.so
;extension=gd.so
;extension=gettext.so
;extension=ifx.so
extension=imap.so
;extension=interbase.so
;extension=java.so
extension=ldap.so
;extension=mhash.so
;extension=mssql65.so
;extension=mssql70.so
extension=mysql.so
;extension=oas.so
;extension=oci8.so
;extension=oracle.so
;extension=pdf.so
;extension=pgsql.so
;extension=sablot.so
;extension=swf.so
;extension=sybase_ct.so
;extension=zlib.so
extension=midgard.so
;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;
[Syslog]
define_syslog_variables = Off ; Whether or not to define the various syslog
variables,
; e.g. $LOG_PID,
$LOG_CRON, etc. Turning it off is a
; good idea
performance-wise. In runtime, you can define
; these variables by
calling define_syslog_variables()
[mail function]
SMTP = localhost ;for win32 only
sendmail_from = [EMAIL PROTECTED] ;for win32 only
;sendmail_path = ;for unix only, may
supply arguments as well (default is 'sendmail -t -i')
[Debugger]
debugger.host = localhost
debugger.port = 7869
debugger.enabled = False
[Logging]
; These configuration directives are used by the example logging mechanism.
; See examples/README.logging for more explanation.
;logging.method = db
;logging.directory = /path/to/log/directory
[Java]
;java.class.path = .\php_java.jar
;java.home = c:\jdk
;java.library = c:\jdk\jre\bin\hotspot\jvm.dll
;java.library.path = .\
[SQL]
sql.safe_mode = Off
[ODBC]
;odbc.default_db = Not yet implemented
;odbc.default_user = Not yet implemented
;odbc.default_pw = Not yet implemented
odbc.allow_persistent = On ; allow or prevent persistent links
odbc.check_persistent = On ; check that a connection is still validbefore
reuse
odbc.max_persistent = -1 ; maximum number of persistent links. -1 means
no limit
odbc.max_links = -1 ; maximum number of links
(persistent+non persistent). -1 means no limit
odbc.defaultlrl = 4096 ; Handling of LONG fields. Returns number of bytes to
variables, 0 means passthru
odbc.defaultbinmode = 1 ; Handling of binary data. 0 means passthru, 1
return as is, 2 convert to char
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation of
uodbc.defaultlrl
; and uodbc.defaultbinmode
[MySQL]
mysql.allow_persistent = On ; allow or prevent persistent link
mysql.max_persistent = -1 ; maximum number of persistent links. -1 means
no limit
mysql.max_links = -1 ; maximum number of links
(persistent+non persistent). -1 means no limit
mysql.default_port = ; default port number for
mysql_connect(). If unset,
; mysql_connect() will
use the $MYSQL_TCP_PORT, or the mysql-tcp
; entry in
/etc/services, or the compile-time defined MYSQL_PORT
; (in that order).
Win32 will only look at MYSQL_PORT.
mysql.default_socket = ; default socket name for local MySQL
connects. If empty, uses the built-in
; MySQL defaults
mysql.default_host = ; default host for mysql_connect()
(doesn't apply in safe mode)
mysql.default_user = ; default user for mysql_connect()
(doesn't apply in safe mode)
mysql.default_password = ; default password for mysql_connect()
(doesn't apply in safe mode)
; Note that this is
generally a *bad* idea to store passwords
; in this file. *Any*
user with PHP access can run
; 'echo
cfg_get_var("mysql.default_password")' and reveal that
; password! And of
course, any users with read access to this
; file will be able to
reveal the password as well.
[mSQL]
msql.allow_persistent = On ; allow or prevent persistent link
msql.max_persistent = -1 ; maximum number of persistent links.
-1 means no limit
msql.max_links = -1 ; maximum number of links
(persistent+non persistent). -1 means no limit
[PostgresSQL]
pgsql.allow_persistent = On ; allow or prevent persistent link
pgsql.max_persistent = -1 ; maximum number of persistent links. -1 means
no limit
pgsql.max_links = -1 ; maximum number of links
(persistent+non persistent). -1 means no limit
[Sybase]
sybase.allow_persistent = On ; allow or prevent persistent link
sybase.max_persistent = -1 ; maximum number of persistent links. -1 means
no limit
sybase.max_links = -1 ; maximum number of links
(persistent+non persistent). -1 means no limit
;sybase.interface_file = "/usr/sybase/interfaces"
sybase.min_error_severity = 10 ; minimum error severity to display
sybase.min_message_severity = 10 ; minimum message severity to display
sybase.compatability_mode = Off ; compatability mode with old versions of PHP
3.0.
; If on, this
will cause PHP to automatically assign types to results
; according to
their Sybase type, instead of treating them all as
; strings.
This compatability mode will probably not stay around
; forever, so
try applying whatever necessary changes to your code,
; and turn it
off.
[Sybase-CT]
sybct.allow_persistent = On ; allow or prevent persistent link
sybct.max_persistent = -1 ; maximum number of persistent links.
-1 means no limit
sybct.max_links = -1 ; maximum number of links
(persistent+non persistent). -1 means no limit
sybct.min_server_severity = 10 ; minimum server message severity to
display
sybct.min_client_severity = 10 ; minimum client message severity to
display
[bcmath]
bcmath.scale = 0 ; number of decimal digits for all bcmath functions
[browscap]
;browscap = extra/browscap.ini
[Informix]
ifx.default_host = ; default host for ifx_connect()
(doesn't apply in safe mode)
ifx.default_user = ; default user for ifx_connect()
(doesn't apply in safe mode)
ifx.default_password = ; default password for ifx_connect()
(doesn't apply in safe mode)
ifx.allow_persistent = On ; allow or prevent persistent link
ifx.max_persistent = -1 ; maximum number of persistent links.
-1 means no limit
ifx.max_links = -1 ; maximum number of links
(persistent+non persistent). -1 means no limit
ifx.textasvarchar = 0 ; if set on, select statements return
the contents of a text blob instead of it's id
ifx.byteasvarchar = 0 ; if set on, select statements return
the contents of a byte blob instead of it's id
ifx.charasvarchar = 0 ; trailing blanks are stripped from
fixed-length char columns. May help the life
; of Informix SE users.
ifx.blobinfile = 0 ; if set on, the contents of text&byte
blobs are dumped to a file instead of
; keeping them in memory
ifx.nullformat = 0 ; NULL's are returned as empty
strings, unless this is set to 1. In that case,
; NULL's are returned as string
'NULL'.
[Session]
session.save_handler = files ; handler used to store/retrieve data
session.save_path = /tmp ; argument passed to save_handler
; in the case of files, this is the
; path where data files are stored
session.use_cookies = 1 ; whether to use cookies
session.name = PHPSESSID
; name of the session
; is used as cookie name
session.auto_start = 0 ; initialize session on request startup
session.cookie_lifetime = 0 ; lifetime in seconds of cookie
; or if 0, until browser is restarted
session.cookie_path = / ; the path the cookie is valid for
session.cookie_domain = ; the domain the cookie is valid for
session.serialize_handler = php ; handler used to serialize data
; php is the standard serializer of PHP
session.gc_probability = 1 ; percentual probability that the
; 'garbage collection' process is started
; on every session initialization
session.gc_maxlifetime = 1440 ; after this number of seconds, stored
; data will be seen as 'garbage' and
; cleaned up by the gc process
session.referer_check = ; check HTTP Referer to invalidate
; externally stored URLs containing ids
session.entropy_length = 0 ; how many bytes to read from the file
session.entropy_file = ; specified here to create the session id
; session.entropy_length = 16
; session.entropy_file = /dev/urandom
session.cache_limiter = nocache ; set to {nocache,private,public} to
; determine HTTP caching aspects
session.cache_expire = 180 ; document expires after n minutes
session.use_trans_sid = 1 ; use transient sid support if enabled
; by compiling with --enable-trans-sid
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
[MSSQL]
mssql.allow_persistent = On ; allow or prevent persistent link
mssql.max_persistent = -1 ; maximum number of persistent links.
-1 means no limit
mssql.max_links = -1 ; maximum number of links
(persistent+non persistent). -1 means no limit
mssql.min_error_severity = 10 ; minimum error severity to display
mssql.min_message_severity = 10 ; minimum message severity to display
mssql.compatability_mode = Off ; compatability mode with old versions of PHP
3.0.
;mssql.textlimit = 4096 ; valid range 0 - 2147483647 default =
4096
;mssql.textsize = 4096 ; valid range 0 - 2147483647 default =
4096
;mssql.batchsize = 0 ; limits the number of records in
each bach. 0 = all records in one batch.
[Assertion]
;assert.active = On ; assert(expr); active by
default
;assert.warning = On ; issue a PHP warning for each
failed assertion.
;assert.bail = Off ; don't bail out by default.
;assert.callback = 0 ; user-function to be called
if an assertion fails.
;assert.quiet_eval = 0 ; eval the expression with
current error_reporting(). set to true if you want error_reporting(0) around the
eval().
[Ingres II]
ingres.allow_persistent = On ; allow or prevent persistent link
ingres.max_persistent = -1 ; maximum number of persistent links.
(-1 means no limit)
ingres.max_links = -1 ; maximum number of links,
including persistents (-1 means no limit)
ingres.default_database = ; default database (format :
[node_id::]dbname[/srv_class]
ingres.default_user = ; default user
ingres.default_password = ; default password
[Verisign Payflow Pro]
pfpro.defaulthost = "test.signio.com" ; default
Signio server
pfpro.defaultport = 443 ; default port to connect to
pfpro.defaulttimeout = 30 ; default timeout in seconds
; pfpro.proxyaddress = ; default proxy IP address (if
required)
; pfpro.proxyport = ; default proxy port
; pfpro.proxylogon = ; default proxy logon
; pfpro.proxypassword = ; default proxy password
[Sockets]
sockets.use_system_read = On ; Use the system read() function
instead of
; the php_read() wrapper.
; Local Variables:
; tab-width: 4
; End:
##
## httpd.conf -- Apache HTTP server configuration file
##
#
# Based upon the NCSA server configuration files originally by Rob McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# /usr/conf/srm.conf and then /usr/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
#
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
#
ServerType standalone
#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
#
# Do NOT add a slash at the end of the directory path.
#
ServerRoot "/etc/httpd"
#
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#
LockFile /var/lock/httpd.lock
#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile /var/run/httpd.pid
#
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you *must* ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile /var/run/httpd.scoreboard
#
# In the standard configuration, the server will process this file,
# srm.conf, and access.conf in that order. The latter two files are
# now distributed empty, as it is recommended that all directives
# be kept in a single file for simplicity. The commented-out values
# below are the built-in defaults. You can have the server ignore
# these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300
#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On
#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100
#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15
#
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
#
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#
MinSpareServers 5
MaxSpareServers 20
#
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
#
StartServers 8
#
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#
MaxClients 150
#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
#
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
#
MaxRequestsPerChild 100
#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80
Listen 80
#
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *
#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
#
# Note: The order is which modules are loaded is important. Don't change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#LoadModule mmap_static_module modules/mod_mmap_static.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule env_module modules/mod_env.so
LoadModule config_log_module modules/mod_log_config.so
LoadModule agent_log_module modules/mod_log_agent.so
LoadModule referer_log_module modules/mod_log_referer.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule mime_module modules/mod_mime.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule status_module modules/mod_status.so
LoadModule info_module modules/mod_info.so
LoadModule includes_module modules/mod_include.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule asis_module modules/mod_asis.so
LoadModule imap_module modules/mod_imap.so
LoadModule action_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule anon_auth_module modules/mod_auth_anon.so
LoadModule db_auth_module modules/mod_auth_db.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
#LoadModule auth_ldap_module modules/mod_auth_ldap.so
#LoadModule digest_module modules/mod_digest.so
#LoadModule proxy_module modules/libproxy.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule example_module modules/mod_example.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule bandwidth_module modules/mod_bandwidth.so
#LoadModule put_module modules/mod_put.so
#LoadModule throttle_module modules/mod_throttle.so
#LoadModule define_module modules/mod_define.so
<IfDefine HAVE_PERL>
LoadModule perl_module modules/libperl.so
</IfDefine>
LoadModule midgard_module modules/mod_midgard.so
<IfDefine HAVE_PHP>
LoadModule php_module modules/mod_php.so
</IfDefine>
<IfDefine HAVE_PHP3>
LoadModule php3_module modules/libphp3.so
</IfDefine>
<IfDefine HAVE_PHP4>
LoadModule php4_module modules/libphp4.so
</IfDefine>
<IfDefine HAVE_DAV>
LoadModule dav_module modules/libdav.so
</IfDefine>
<IfDefine HAVE_ROAMING>
LoadModule roaming_module modules/mod_roaming.so
</IfDefine>
<IfDefine HAVE_SSL>
LoadModule ssl_module modules/libssl.so
</IfDefine>
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
#AddModule mod_mmap_static.c
#AddModule mod_mime_magic.c
#AddModule mod_speling.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule mod_cern_meta.c
#AddModule mod_usertrack.c
#AddModule mod_example.c
#AddModule mod_unique_id.c
#AddModule mod_bandwidth.c
#AddModule mod_put.c
<IfDefine HAVE_PERL>
</IfDefine>
<IfDefine HAVE_PHP>
</IfDefine>
<IfDefine HAVE_PHP3>
</IfDefine>
<IfDefine HAVE_PHP4>
</IfDefine>
<IfDefine HAVE_DAV>
</IfDefine>
<IfDefine HAVE_ROAMING>
</IfDefine>
<IfDefine HAVE_SSL>
</IfDefine>
#
# ExtendedStatus: controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On
### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
#
#
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
#
Port 80
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group nobody on these systems!
#
User apache
Group apache
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin [EMAIL PROTECTED]
#
# ServerName: allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
#ServerName localhost
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot /var/www/default
#
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#
#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/var/www/default">
#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
Options Indexes Includes FollowSymLinks
#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
#
AllowOverride None
#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>
#
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
# See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
#
UserDir public_html
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>
# Order deny,allow
# Deny from all
# </Limit>
#</Directory>
#
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
#
DirectoryIndex index.html index.htm index.shtml index.php index.php4 index.php3
index.phtml index.cgi
#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs
#
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName on
#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig /etc/mime.types
#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain
#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostNameLookups off
#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/httpd/error_log
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn
#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
# CustomLog /var/log/httpd/access_log common
CustomLog /var/log/httpd/access_log combined
#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog /var/log/httpd/referer_log referer
#CustomLog /var/log/httpd/agent_log agent
#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog /var/log/httpd/access_log combined
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature EMail
#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
#
Alias /icons/ "/var/www/icons/"
<Directory "/var/www/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
#
# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/var/www/cgi-bin">
AllowOverride None
Options ExecCGI
Order allow,deny
Allow from all
</Directory>
#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#
#
# Directives controlling the display of server-generated directory listings.
#
#
# FancyIndexing: whether you want fancy directory indexing or standard
#
IndexOptions FancyIndexing
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon: which icon to show for files which do not have an icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif
#
# AddDescription: allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName: the name of the README file the server will look for by
# default, and append to directory listings.
#
# HeaderName: the name of a file which should be prepended to
# directory indexes.
#
# The server will first look for name.html and include it if found.
# If name.html doesn't exist, the server will then look for name.txt
# and include it as plaintext if found.
#
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore: a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
#
# AddEncoding: allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
#
# AddLanguage: allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand. Note that the suffix does not have to be the same
# as the language keyword --- those with documents in Polish (whose
# net-standard language code is pl) may wish to use "AddLanguage pl .po"
# to avoid the ambiguity with the common suffix for perl scripts.
#
AddLanguage en .en
AddLanguage fr .fr
AddLanguage de .de
AddLanguage da .da
AddLanguage el .el
AddLanguage it .it
#
# LanguagePriority: allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference.
#
LanguagePriority en fr de
#
# AddType: allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
#
# The following is for PHP4 (conficts with PHP/FI, below):
<IfModule mod_php4.c>
AddType application/x-httpd-php .php4 .php3 .phtml .php
AddType application/x-httpd-php-source .phps
</IfModule>
# The following is for PHP3:
<IfModule mod_php3.c>
AddType application/x-httpd-php3 .php3
AddType application/x-httpd-php3-source .phps
</IfModule>
# The following is for PHP/FI (PHP2):
<IfModule mod_php.c>
AddType application/x-httpd-php .phtml
</IfModule>
AddType application/x-tar .tgz
#
# AddHandler: allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
#AddHandler cgi-script .cgi
#
# To use server-parsed HTML files
#
AddType text/html .shtml
AddHandler server-parsed .shtml
#
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#
#AddHandler send-as-is asis
#
# If you wish to use server-parsed imagemap files, use
#
AddHandler imap-file map
#
# To enable type maps, you might want to use
#
#AddHandler type-map var
#
# Action: lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
#
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web
#
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#
#MetaSuffix .meta
#
# Customizable error response (Apache style)
# these come in three flavors
#
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the (") marks it as text, it does not get output
#
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
#
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will *not* be available to such a script.
#
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
#
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
# If the perl module is installed, this will be enabled.
<IfModule mod_perl.c>
Alias /perl/ /var/www/perl/
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
Options +ExecCGI
</Location>
</IfModule>
#
# Allow http put (such as Netscape Gold's publish feature)
# Use htpasswd to generate /etc/httpd/conf/passwd.
# You must unremark these two lines at the top of this file as well:
#LoadModule put_module modules/mod_put.so
#AddModule mod_put.c
AddModule mod_midgard.c
#
#Alias /upload /tmp
#<Location /upload>
# EnablePut On
# AuthType Basic
# AuthName Temporary
# AuthUserFile /etc/httpd/conf/passwd
# EnableDelete Off
# umask 007
# <Limit PUT>
# require valid-user
# </Limit>
#</Location>
#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# Allow access to local system documentation from localhost
Alias /doc/ /usr/share/doc/
<Location /doc>
order deny,allow
deny from all
allow from localhost .localdomain
Options Indexes FollowSymLinks
</Location>
#
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Directory>
#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On
#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "/var/cache/httpd"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# If you want to use name-based virtual hosts you need to define at
# least one IP address (and port number) for them.
#
MidgardDatabase midgard midgard midgard
## Uncomment these if you want to use filetemplates
MidgardTemplate phpelements.xml
AddType application/x-httpd-php-midgard .mgd
## Uncomment this for PHP3,
# MidgardRootFile "/usr/lib/apache/midgard-root.php3"
## or this for PHP4
MidgardRootFile "/usr/lib/apache/midgard-root.php"
NameVirtualHost 192.168.1.2:80
<VirtualHost admin.spottedpussy.com:80>
MidgardEngine On
ServerName admin.spottedpussy.com
Port 80
# Switch off magic quotes - it is required with Midgard
# php_flag magic_quotes_gpc off
# php_flag magic_quotes_runtime off
# Configure text parser:
# Change to 'russian' for Russian Midgard
MidgardParser latin1
MidgardBlobDir "/var/www/blobs"
# Configuration for Russian Midgard:
<IfModule mod_charset.c>
# default charset for real or virtual server (selected if all other charset-
# selections methods fails)
CharsetDefault koi8-r
# Default source (on-disk) charset (we keep all content in DB in KOI8-R
# encoding). If you want different encoding, please re-encode midgard-ru.sql
# before inserting it into DB too.
CharsetSourceEnc koi8-r
# Force mod_charset to do its work
CharsetDisable Off
</IfModule>
</VirtualHost>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
