Hi Again John, Being a consummate newbie with Midgard, I am attaching my entire repligard.conf file in order that you will be able to see the user name and password used in the file.
The username, password, and name values listed in the file below are in sync with my mySQL database. Initial mySQL Information ========= name = cms hostname = localhost username = root password = datait One thing to note: After running dbinstall, the database, midgard user, and tables are created. However, no tables (such as host) are populated. Thank you very much for your patience! Kat--- (repligard.conf file contents are below.) *** Begin repligard.conf ***** <?xml version="1.0" encoding="ISO-8859-1" ?> <!-- $Id: repligard.conf.in,v 1.5 2001/03/23 18:53:53 ab Exp $ --> <!DOCTYPE Repligard [ <!ELEMENT Repligard (database?,login?,replicate?)> <!ELEMENT database EMPTY> <!ATTLIST database schema CDATA #REQUIRED> <!ATTLIST database name CDATA #REQUIRED> <!ATTLIST database username CDATA #REQUIRED> <!ATTLIST database password CDATA #REQUIRED> <!ATTLIST database encoding CDATA #REQUIRED> <!ATTLIST database blobdir CDATA #REQUIRED> <!ELEMENT login EMPTY> <!ATTLIST login username CDATA #REQUIRED> <!ATTLIST login password CDATA #REQUIRED> <!ELEMENT replicate (resource*)> <!ATTLIST replicate all (yes|no) 'no'> <!ELEMENT resource EMPTY> <!ATTLIST resource type CDATA #IMPLIED> <!ATTLIST resource id CDATA #IMPLIED> <!ATTLIST resource guid CDATA #IMPLIED> ]> <Repligard xmlns="http://www.midgard-project.org/repligard/1.4";> <!-- Database description --> <!-- Path to optionally compressed Repligard schema file --> <!-- Note that if you want to replicate whole sitegroup, then --> <!-- religard_withsg.xml schema should be referenced here --> <!-- instead of repligard.xml --> <database schema="/usr/local/midgard/share/midgard/repligard.xml" name="midgard" username="midgard" password="midgard" encoding="ISO-8859-1" blobdir="/var/www/blobs" /> <!-- Login account description for Repligard operation --> <!-- Always use 'username+sitegroup' when logging into specific sitegroup --> <!-- because there is no information elsewhere for Repligard to choose --> <!-- correct sitegroup if it is unspecified --> <!-- Sitegroup administrators should login as 'username*sitegroup' --> <login username="admin" password="password" /> <!-- Use <include name="filename" /> to include another Repligard config file --> <!-- Description of the exportable resources --> <!-- <replicate all="yes"/>--> <!-- replicate section can contain references for additional resource trees --> <!-- that should be replicated. In this case attribute 'all' shouldn't be used --> <!-- and section itself looks like: --> <!-- <replicate> --> <!-- First form: referencing resource by its local ID and type (table name) from schema file --> <!-- <resource id="some-local-id-of-resource" type="name-of-resource" /> --> <!-- Second form: referencing resource by its globally unique ID (GUID) --> <!-- <resource guid="some-guid-of-resource" /> --> <!-- </replicate> --> </Repligard> **** End repligard.conf **** --- John Habermann <[EMAIL PROTECTED]> wrote: > On Tue, 2 Sep 2003 14:43:32 -0700 (PDT) > Data Meister <[EMAIL PROTECTED]> wrote: > > > John --- > > > > Thank you for your reply! Per your suggestion, I > > checked the /usr/local/midgard/etc/repligard.conf > > file. The file contained: > > > > <database > > > schema="/usr/local/midgard/share/midgard/repligard.xml" > > name="midgard" > > username="midgard" > > password="midgard" > > encoding="ISO-8859-1" > > blobdir="/var/www/blobs" > > /> > > > > The password in this file is the one I use to > connect > > to the mySQL database. Am I looking in the > correct > > location? I ask this question because the blobdir > > listed above is not correct for my installation. > It > > should be /usr/local/apache/htdocs/blobs. > > Hi Kat > > What is the admin user and password listed as in > your repligard.conf file. This is a common problem > with repligard connecting to the database when you > have midgard installed already. Also is your > loopback device meant to be 127.0.0.2? > > John > > > > Again, thank you for your help! > > > > Kat--- > > > > --- John Habermann <[EMAIL PROTECTED]> wrote: > > > Check to see what the password is in the > > > /usr/loca/midgard/etc/repligard.conf file. If > that > > > is wrong then repligard will not be able to > connect > > > to the database. > > > > > > Cheers John > > > > > > On Wed, 27 Aug 2003 16:30:54 -0700 (PDT) > > > Data Meister <[EMAIL PROTECTED]> wrote: > > > > > > > Another (!) new user installation question... > > > > > > > > I installed Midgard on the following system: > > > > > > > > RedHat Linux Version 9 > > > > Apache Version 1.3.28 > > > > PHP Version 4.3.2 > > > > MySQL Version 4.0.14 > > > > > > > > Tasks: > > > > > > > > 1) Installed Midgard libraries using: > > > > > > > > ./configure --prefix=/usr/local/midgard \ > > > > --with-mysql=/usr/local/mysql \ > > > > --with-expat > > > > > > > > This was successful. > > > > > > > > 2) Installed Midgard Database using: > > > > > > > > ./configure --with-db-admin=root \ > > > > --with-db-admin-password=datait \ > > > > --with-db-user=midgard \ > > > > --with-db-user-password=midgard \ > > > > --with-db=midgard \ > > > > --with-lang=en \ > > > > --with-install=new \ > > > > --with-host=www.midgard.test \ > > > > --with-ip=127.0.0.2 \ > > > > --with-blobdir=/usr/local/apache/htdocs/blobs > \ > > > > --with-apxs=/usr/local/apache/bin/apxs > > > > > > > > This was successful. > > > > > > > > 3) Ran dbinstall script. I received the > following > > > > screen output: > > > > > > > > **** Begin Output ******** > > > > Creating Midgard database... > > > > Updating MySQL database... > > > > Creating blobdir... > > > > Skipping 1.2.5 admin site... > > > > Installing Asgard... > > > > repligard-Message: Reading config file > > > > install-repligard.conf > > > > > > > > repligard-CRITICAL **: Error in DB connection > > > > > /tmp/midgard/midgard-data-1.5.0/midgard-data.conf > > > > contains configuration information for Apache. > > > > You should add it to Apache configuration file > > > before > > > > starting Midgard. > > > > ! Asgard as root at > > > http://www.midgard.test:80/asgard/ > > > > using: > > > > <username>='admin' and <password>='password' > > > > > > > > **** End Output ******* > > > > > > > > Notice the repligard-CRITICAL error. The > midgard > > > > database gets built. However, none of the > > > > expected tables are populated (such as the > host > > > table > > > > in the midgard database). > > > > > > > > 4) This looks like it could be a database user > > > name > > > > and/or password error. To test this, > > > > I attempted to access the midgard database > using > > > the > > > > user names and databases in the > > > > ./configure above: > > > > > > > > ./mysql --user=midgard --password=midgard > > > > --database=midgard > > > > > > > > This was successful. > > > > > > > > Has any one experienced this error before? Any > > > ideas? > > > > > > > > Thank you all very much! > > > > > > > > > > > > > > > > __________________________________ > > > > Do you Yahoo!? > > > > Yahoo! SiteBuilder - Free, easy-to-use web > site > > > design software > > > > http://SiteBuilder.yahoo.com > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: > > > [EMAIL PROTECTED] > > > > For additional commands, e-mail: > > > [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: > > > [EMAIL PROTECTED] > > > For additional commands, e-mail: > > > [EMAIL PROTECTED] > > > > > > > > > __________________________________ > > Do you Yahoo!? > > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > > http://SiteBuilder.yahoo.com > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: > [EMAIL PROTECTED] > > For additional commands, e-mail: > [EMAIL PROTECTED] > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: > [EMAIL PROTECTED] > For additional commands, e-mail: > [EMAIL PROTECTED] > __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
