Hi BJ

No ... not 2 instances ... just break up the installation over 2 computers
i.e. 1st computer with dbase installed and 2nd computer with application
installed

cheers

Web Page: www.ascconsultants.com.au 
Email: [EMAIL PROTECTED] 

> -----Original Message-----
> From: BJ Freeman [mailto:[EMAIL PROTECTED]
> Sent: Monday, 8 October 2007 10:51 AM
> To: [email protected]
> Subject: Re: Setup with more than one computer
> 
> Clarification:
> it looks like you want to run two instances of ofbiz
> to the same DB.
> this takes extra configuration.
> 
> FYI the apps use the web server
> I think you are referring the Ecommerce side
> 
> not sure why you want to use two instances, since the backend (apps) is
> ssl and 8443.
> you can block that port through the fire wall if you only want intra lan
> communications.
> 
> i run all behind a firewall, and both the http and https on the internet
> using a firewall for ports 80 and 8443.
> so the DB is protected.
> I believe you can route intra lan usage through a firewall for port 8443
> (apps)
> 
> 
> Philip Laing sent the following on 10/7/2007 4:19 PM:
> > Hi Fellas
> >
> > The network topology I would like OFBiz setup is using more than one
> > computer using the following options:
> > 1. Application Server + Dbase
> > 2. Web Server + Application Server + Dbase
> >
> > Now . I would feel confident setting up:
> >
> > Option 1. (Apps + Dbase) I will be placing the Apps and Dbase between a
> > firewall i.e. Apps-(192.168.0.192/24) > Firewall > Dbase-
> (192.168.2.100/24)
> >
> > Option 2. (Web Server+ Apps + Dbase) Web Server-(192.168.1.100/24) >
> > Firewall > Dbase-(192.168.2.100/24) + Apps-(192.168.2.101/24)
> >
> > Notice the IP Addresses and different subnet masks.  The question is:
> OFBiz
> > should be able to talk to the *dbase*, *webserver* and or *application
> > server* though ports only - Not relying on the same IP addressing?  In
> other
> > words, rather than relying on TCP/IP to transfer information to each
> node
> > ... or do I need to route the disparate IP addressing so that each node
> can
> > see each other through IP addressing
> >
> > Thanks in advance
> >
> >
> > Phil
> >
> >
> >
> >
> >

Reply via email to