Thanks for the help. I just wanted to make sure that it should work.
Robert Wynkoop On Thu, Jan 9, 2014 at 10:00 PM, Pranay Pandey < [email protected]> wrote: > > Hi Robert, > > You should be able to perform these operations for Shipment, pick, pack > and then printing shipping label from USPS. This is all which can be done > with Facility Manager application. > Picking: > https://demo-stable.ofbiz.apache.org/facility/control/PicklistOptions?facilityId=WebStoreWarehouse > Manage Picklists: > https://demo-stable.ofbiz.apache.org/facility/control/PicklistManage?facilityId=WebStoreWarehouse > Packing: > https://demo-stable.ofbiz.apache.org/facility/control/PackOrder?facilityId=WebStoreWarehouse > > Once the packing is complete you can print label from Shipment Route > Segment view: > https://demo-stable.ofbiz.apache.org/facility/control/EditShipmentRouteSegments?shipmentId=9996 > > Before going for enabling system for printing label from Third Party > Shipping service you will need to make required configuration. Then from > above view you should be able to first use "Confirm Shipment" then you can > request for label from the same view. This all will be possible after > adding required configuration for USPS account. > > HTH! > > Thanks and Regards > -- > Pranay Pandey > Hotwax Media | http://www.hotwaxmedia.com/ > Direct: +91 9826035576 > > On 09-Jan-2014, at 10:59 PM, Robert Wynkoop wrote: > > Does the demo work without doing a quick ship? > > Currently I'm thinking I will pick, pack, ship in separate steps. I also > plan to use daily shippments. > > Somewhere I need get and print postage. I was this would happen during > the ship step. (or is should this be done in the shippment) > > In my testing, I could pick and pack as a single step with no problem. I > was unable to proceed from there. (If I recall, quick ship did work.) I'm > not wanting to use quick ship. > > Where in the process does OFBiz expect postage to be obtained and recorded > for accounting? > > How would I later determine if a order had postage? If I need to reprint a > label. > > Robert Wynkoop > Sent from my mobile phone. > On Jan 5, 2014 4:19 AM, "Jacques Le Roux" <[email protected]> > wrote: > > You should be able to test by yourself at > > https://demo-trunk.ofbiz.apache.org/ordermgr/control/orderentryCredential:admin/ofbiz > > Take the DemoCustomer (taping de in the Customer lookup field is enough, > > the name will appear after 1 or 2 seconds, this demo server is slow), then > > ordering is straigtforward. > > You can use the Quick Ship Entire Order after picking USPS as shipper. > > Note that not all is provided OOTB since some sipping estimating services > > might not be free or might need an account (I don't remember for USPS) > > > Jacques > > > On Sunday, January 05, 2014 12:23 AM [email protected] wrote > > Does OFBiz work out of the box with USPS shipping? > > > I was wanting to be able to PICK and PACK in one operation and then print > > postage and labels in a second operation. > > > Robert Wynkoop > > > >
