Thanks Pierre,
Committed at r1684105
Peter,
Good luck with your endeavour with OFBiz, your picked the right project :)
Jacques
Le 08/06/2015 07:47, Pierre Smits a écrit :
Hi Peter,
Following issue has been created to get this resolved in trunk:
https://issues.apache.org/jira/browse/OFBIZ-6476
Best regards,
Pierre Smits
*ORRTIZ.COM <http://www.orrtiz.com>*
Services & Solutions for Cloud-
Based Manufacturing, Professional
Services and Retail & Trade
http://www.orrtiz.com
On Mon, Jun 8, 2015 at 3:21 AM, Peter Arnold <[email protected]> wrote:
Dear Jaques,
Thank you very much for your help. I added the registry as per your
proposal
and now it works fine.
Since I am still an OFBiz newb I will study your response in detail because
I would like to understand how you found out that this was the missing bit.
This will require me some time but will be helpful to overcome the
difficulties I am still having with the system.
As for providing Jira and patches:
I have to ask you to be patient since I am not an IT engineer but have an
entirely different background and at the moment I still don't know how to
generate (and apply) patches.
However, as soon as I resolve my start up difficulties (with Eclipse,
OFBiz,
Java, and so on) rest assured that I will try to contribute the part of my
work which is of interest to this community.
Peter
-----Mensaje original-----
De: Jacques Le Roux [mailto:[email protected]]
Enviado el: sábado, 06 de junio de 2015 17:08
Para: [email protected]
Asunto: Re: Geo Data Set for Chile
Peter,
Solution for you:
It's obvious if you look at the getAssociatedStateList() service
implementation (in Java).
You need to provide a CountryAddressFormat for GeoAssocAndGeoToWithState to
works well.
Something like
<CountryAddressFormat geoId="CHL" geoAssocTypeId=""
requireStateProvinceId="" requirePostalCode="" postalCodeRegex=""
hasPostalCodeExt=""
requirePostalCodeExt="" addressFormat=""/> is enough
All Devs,
I went unnoticed (a bit by Adrian at
https://issues.apache.org/jira/browse/OFBIZ-4270?focusedCommentId=13072722
)
but I think Sascha went a bit too far by forcing CountryAddressFormat into
GeoAssocAndGeoToWithState which is used into getAssociatedStateList() at
http://svn.apache.org/viewvc?view=revision&revision=1153402
2 solutions:
* relax this constraint (will work in all cases)
* provide new CountryAddressFormat for contries missing (when we will add a
new country could "break" again)
Opinions?
Jacques
Le 05/06/2015 17:05, Jacques Le Roux a écrit :
I hope to have a look at your issue tomorrow...
Jacques
Le 02/06/2015 15:39, Peter Arnold a écrit :
Hi All,
I am working on a new customization for Chile based on OFBiz 14.12.
I created a new Geo Data set for Chile containing so far the
administrative regions.
My data set looks as follows:
<Geo abbreviation="CL-02" geoCode="CL-02" geoId="CL-AN"
geoName="Antofagasta" geoTypeId="STATE"/>
<Geo abbreviation="CL-09" geoCode="CL-09" geoId="CL-AR"
geoName="Araucanía" geoTypeId="STATE"/>
<Geo abbreviation="CL-15" geoCode="CL-15" geoId="CL-AP"
geoName="Arica y Parinacota" geoTypeId="STATE"/>
<Geo abbreviation="CL-03" geoCode="CL-03" geoId="CL-AT"
geoName="Atacama" geoTypeId="STATE"/>
<Geo abbreviation="CL-11" geoCode="CL-11" geoId="CL-AI"
geoName="Aysén"
geoTypeId="STATE"/>
<Geo abbreviation="CL-08" geoCode="CL-08" geoId="CL-BI"
geoName="Biobío"
geoTypeId="STATE"/>
<Geo abbreviation="CL-04" geoCode="CL-04" geoId="CL-CO"
geoName="Coquimbo" geoTypeId="STATE"/>
<Geo abbreviation="CL-06" geoCode="CL-06" geoId="CL-LI"
geoName="Libertador General Bernardo O'Higgins" geoTypeId="STATE"/>
<Geo abbreviation="CL-10" geoCode="CL-10" geoId="CL-LL"
geoName="Los Lagos" geoTypeId="STATE"/>
<Geo abbreviation="CL-14" geoCode="CL-14" geoId="CL-LR"
geoName="Los Ríos" geoTypeId="STATE"/>
<Geo abbreviation="CL-12" geoCode="CL-12" geoId="CL-MA"
geoName="Magallanes" geoTypeId="STATE"/>
<Geo abbreviation="CL-07" geoCode="CL-07" geoId="CL-ML"
geoName="Maule"
geoTypeId="STATE"/>
<Geo abbreviation="CL-RM" geoCode="CL-RM" geoId="CL-RM"
geoName="Región Metropolitana de Santiago" geoTypeId="STATE"/>
<Geo abbreviation="CL-01" geoCode="CL-01" geoId="CL-TA"
geoName="Tarapacá" geoTypeId="STATE"/>
<Geo abbreviation="CL-05" geoCode="CL-05" geoId="CL-VS"
geoName="Valparaíso" geoTypeId="STATE"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-AN" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-AR" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-AP" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-AT" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-AI" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-BI" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-CO" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-LI" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-LL" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-LR" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-MA" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-ML" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-RM" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-TA" geoAssocTypeId="REGIONS"/>
<GeoAssoc geoId="CHL" geoIdTo="CL-VS" geoAssocTypeId="REGIONS"/>
When I set the country on following screen to Chile:
https://127.0.0.1:8443/partymgr/control/editcontactmech?partyId=Compa
ny
<https://127.0.0.1:8443/partymgr/control/editcontactmech?partyId=Comp
any&con
tactMechId=9000> &contactMechId=9000
the dropdown for State/Province should show all Chilean regions.
However currently no region is shown and the dropdowns only value is
“No States/Provinces exist”.
Does anybody have an idea why the dropdown is not populated with the
regions created with above data set?
I would appreciate your help on this issue.
Regards,
Peter
---
Este mensaje no contiene virus ni malware porque la protección de avast!
Antivirus está activa.
http://www.avast.com
---
Este mensaje no contiene virus ni malware porque la protección de avast!
Antivirus está activa.
https://www.avast.com/antivirus
