>> Why two backslashes in the path statement I believe this is copy/paste issue
On Fri, Mar 1, 2013 at 12:42 AM, George Kirkham <[email protected]>wrote: > Stephen,**** > > ** ** > > I had time last night to build a Debian server, and found “--force-yes” > was required if I was to use the “-y” parameter;**** > > ** ** > > # apt-get install subversion git-core checkinstall yasm texi2html > libfaac-dev libfaad-dev -y --force-yes**** > > ** ** > > # apt-get install libmp3lame-dev libsdl1.2-dev libx11-dev libxfixes-dev -y > --force-yes**** > > ** ** > > # apt-get install libxvidcore4-dev zlib1g-dev libfaad2 flvtool2 lame -y > --force-yes**** > > ** ** > > And one question;**** > > ** ** > > > Why two backslashes in the path statement (it does work, but why bother?) ? > wget > http://mirror.catn.com/pub/apache//ant/binaries/apache-ant-1.8.4-bin.tar.gz<http://mirror.catn.com/pub/apache/ant/binaries/apache-ant-1.8.4-bin.tar.gz> > **** > > ** ** > > ** ** > > Thanks,**** > > ** ** > > George Kirkham**** > > Installing OM2.x On Debian64 - > Headless.pdf<https://cwiki.apache.org/confluence/download/attachments/27838216/Installing+OM2.x+On+Debian64+-+Headless.pdf?version=18&modificationDate=1360327950000> > > root@omdeb6-64:~# apt-get install subversion git-core checkinstall yasm > texi2html libfaac-dev libfaad-dev -y > Reading package lists... Done > Building dependency tree > Reading state information... Done > The following extra packages will be installed: > git libapr1 libaprutil1 liberror-perl libfaac0 libfaad2 libserf-0-0 > libsvn1 rsync > Suggested packages: > gettext git-doc git-arch git-cvs git-svn git-email git-daemon-run > git-gui gitk gitweb subversion-tools db4.8-util latex2html > The following NEW packages will be installed: > checkinstall git git-core libapr1 libaprutil1 liberror-perl libfaac-dev > libfaac0 libfaad-dev libfaad2 libserf-0-0 libsvn1 rsync > subversion texi2html yasm > 0 upgraded, 16 newly installed, 0 to remove and 0 not upgraded. > Need to get 9,811 kB of archives. > After this operation, 24.6 MB of additional disk space will be used. > WARNING: The following packages cannot be authenticated! > libfaac0 libfaac-dev > E: There are problems and -y was used without --force-yes > > ------------------------------------------------------------------------------------------------------------------ > Used this and installation continued. > > # apt-get install subversion git-core checkinstall yasm texi2html > libfaac-dev libfaad-dev -y --force-yes > > > ------------------------------------------------------------------------------------------------------------------------------------------------------- > > root@omdeb6-64:~# apt-get install libmp3lame-dev libsdl1.2-dev libx11-dev > libxfixes-dev -y > Reading package lists... Done > Building dependency tree > Reading state information... Done > libx11-dev is already the newest version. > libx11-dev set to manually installed. > The following extra packages will be installed: > esound-common libaa1 libaa1-dev libartsc0 libartsc0-dev libasound2-dev > libasyncns0 libaudio-dev libaudio2 libaudiofile-dev > libaudiofile0 libavahi-client-dev libavahi-common-dev libcaca-dev > libcaca0 libdbus-1-dev libdrm-intel1 libdrm-radeon1 libdrm2 > libesd0 libesd0-dev libflac8 libgl1-mesa-dev libgl1-mesa-dri > libgl1-mesa-glx libglib2.0-dev libglu1-mesa libglu1-mesa-dev libice-dev > libmp3lame0 libncurses5-dev libogg0 libpulse-browse0 libpulse-dev > libpulse-mainloop-glib0 libpulse0 libsdl1.2debian > libsdl1.2debian-alsa libslang2-dev libsm-dev libsndfile1 libsvga1 > libsvga1-dev libvorbis0a libvorbisenc2 libx86-1 libxt-dev > libxxf86vm1 mesa-common-dev pkg-config x11proto-fixes-dev > Suggested packages: > esound-clients libasound2-doc nas esound libglide3 libglib2.0-doc > pulseaudio > The following NEW packages will be installed: > esound-common libaa1 libaa1-dev libartsc0 libartsc0-dev libasound2-dev > libasyncns0 libaudio-dev libaudio2 libaudiofile-dev > libaudiofile0 libavahi-client-dev libavahi-common-dev libcaca-dev > libcaca0 libdbus-1-dev libdrm-intel1 libdrm-radeon1 libdrm2 > libesd0 libesd0-dev libflac8 libgl1-mesa-dev libgl1-mesa-dri > libgl1-mesa-glx libglib2.0-dev libglu1-mesa libglu1-mesa-dev libice-dev > libmp3lame-dev libmp3lame0 libncurses5-dev libogg0 libpulse-browse0 > libpulse-dev libpulse-mainloop-glib0 libpulse0 libsdl1.2-dev > libsdl1.2debian libsdl1.2debian-alsa libslang2-dev libsm-dev libsndfile1 > libsvga1 libsvga1-dev libvorbis0a libvorbisenc2 libx86-1 > libxfixes-dev libxt-dev libxxf86vm1 mesa-common-dev pkg-config > x11proto-fixes-dev > 0 upgraded, 54 newly installed, 0 to remove and 0 not upgraded. > Need to get 30.9 MB of archives. > After this operation, 90.3 MB of additional disk space will be used. > WARNING: The following packages cannot be authenticated! > libdrm2 libdrm-intel1 libdrm-radeon1 libmp3lame0 libmp3lame-dev > E: There are problems and -y was used without --force-yes > > ---------------------------------------------------------------- > # apt-get install libmp3lame-dev libsdl1.2-dev libx11-dev libxfixes-dev -y > --force-yes > > ------------------------------------------------------------------------------------------------------------------------------------------------------- > root@omdeb6-64:~# apt-get install libxvidcore4-dev zlib1g-dev libfaad2 > flvtool2 lame -y > Reading package lists... Done > Building dependency tree > Reading state information... Done > libfaad2 is already the newest version. > libfaad2 set to manually installed. > zlib1g-dev is already the newest version. > zlib1g-dev set to manually installed. > The following extra packages will be installed: > libruby1.8 libxvidcore4 ruby1.8 > Suggested packages: > ruby1.8-examples ri1.8 > The following NEW packages will be installed: > flvtool2 lame libruby1.8 libxvidcore4 libxvidcore4-dev ruby1.8 > 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. > Need to get 3,314 kB of archives. > After this operation, 11.0 MB of additional disk space will be used. > WARNING: The following packages cannot be authenticated! > lame libxvidcore4 libxvidcore4-dev > E: There are problems and -y was used without --force-yes > > ---------------------------------------------------------------- > > apt-get install libxvidcore4-dev zlib1g-dev libfaad2 flvtool2 lame -y > --force-yes > > > ------------------------------------------------------------------------------------------------------------------------------------------------------- > > Why two backslashes in the path statement (it does work, but why?) ? > wget > http://mirror.catn.com/pub/apache//ant/binaries/apache-ant-1.8.4-bin.tar.gz<http://mirror.catn.com/pub/apache/ant/binaries/apache-ant-1.8.4-bin.tar.gz> > > > ------------------------------------------------------------------------------------------------------------------------------------------------------- > > > **** > > ** ** > > ** ** > > *From:* Stephen Cottham [mailto:[email protected]] > *Sent:* Friday, 1 March 2013 3:36 AM > *To:* [email protected] > *Subject:* Updated Ubuntu guide 12:10 including h264 codec support and > latest versions of ffmpeg, swftools and various deps. **** > > ** ** > > Hi All,**** > > ** ** > > Updated guide can be found in the usual place:**** > > ** ** > > > https://cwiki.apache.org/confluence/display/OPENMEETINGS/Tutorials+for+installing+OpenMeetings+and+Tools > **** > > * * > > The other versions for Debian and Ubuntu will be updated this week.**** > > ** ** > > Any issues with the new guide please let me know.**** > > ** ** > > Best Regards**** > > ** ** > > ** ** > > *Stephen Cottham** > *Group IT Manager (Associate) > > Robert Bird Group > Level 5, 333 Ann St > Brisbane, Queensland, 4000, Australia**** > > *Phone: +6173 319 2777 (AUS)***** > > *Phone: +44207 633 2880 (UK)***** > > *Fax: +6173 319 2799***** > > **** > > *Mobile: +61400 756 963 (AUS)***** > > *Mobile: +447900 918 616 (UK)***** > > *Web: **www.robertbird.com* <http://www.robertbird.com/>**** > > <http://www.robertbird.com.au/> > > This email and any attachments are confidential and may contain legally > privileged information or copyright material. Unless expressly stated, > confidentiality and/or legal privilege is not intended to be waived by the > sending of this email. The contents of this email, including any > attachments, are intended solely for the use of the individual or entity to > whom they are addressed. If you are not an intended recipient, please > contact us immediately by return email and then delete both messages. You > may not otherwise read, forward, copy, use or disclose this email or any > attachments. Any views expressed in this email are those of the individual > sender except where the sender expressly, and with authority, states > otherwise. It is your responsibility to check any attachments for viruses > or defects before opening or sending them on. None of the sender or its > related entities accepts any liability for any consequential damage > resulting from this email containing computer viruses. **** > > **** > > > Disclaimer added by *CodeTwo Exchange Rules* > www.codetwo.com**** > > ** ** > -- WBR Maxim aka solomax
<<image001.gif>>
<<image002.png>>
