I can not, what parameter should I be using. I tried uid=%s and it does not work either. What would you suggest?
On Mon, Mar 23, 2015 at 10:11 PM, Maxim Solodovnik <[email protected]> wrote: > in case of > ldap_auth_type=SIMPLEBIND > > only > ldap_userdn_format=sAMAccountName=%s > > is used. Are you sure you are able to login to your LDAP using " > sAMAccountName=testuser" as login? > > On Tue, Mar 24, 2015 at 11:03 AM, FJ <[email protected]> wrote: > >> Maxim, this is my config >> >> ldap_conn_host=dc01.xxxyyy.local >> ldap_conn_port=389 >> ldap_conn_secure=false >> >> ldap_admin_dn=CN=mjane,OU=Employees,DC=xxxyyy,DC=local >> >> ldap_passwd=password >> >> ldap_search_base=OU=Employees,DC=xxxyyy,DC=local >> >> ldap_search_query=(sAMAccountName=%s),OU=Employees,DC=xxxyyy,DC=local >> >> ldap_search_scope=ONELEVEL >> >> ldap_auth_type=SIMPLEBIND >> >> ldap_userdn_format=sAMAccountName=%s >> >> ldap_provisionning=AUTOCREATE >> >> ldap_deref_mode=always >> >> ldap_use_admin_to_get_attrs=true >> >> ldap_sync_password_to_om=true >> >> ldap_user_attr_lastname=sn >> ldap_user_attr_firstname=givenName >> ldap_user_attr_mail=mail >> ldap_user_attr_street=streetAddress >> ldap_user_attr_additionalname=description >> ldap_user_attr_fax=facsimileTelephoneNumber >> ldap_user_attr_zip=postalCode >> ldap_user_attr_country=co >> ldap_user_attr_town=l >> ldap_user_attr_phone=telephoneNumber >> >> ldap_use_lower_case=false >> >> On Mon, Mar 23, 2015 at 9:53 PM, Maxim Solodovnik <[email protected]> >> wrote: >> >>> I'm afraid I need more detailed description of what is wrong >>> otherwise I can't help >>> >>> On Tue, Mar 24, 2015 at 10:50 AM, FJ <[email protected]> wrote: >>> >>>> Maxim, I am using SIMPLEBIND.. Also try the other one with the same >>>> result. I issue is the similar to the one of "Wrong Password" issue but it >>>> get "Invalid password" instead. Something about the charcset. It >>>> said it was resolve by you but sure of how. >>>> >>>> On Mon, Mar 23, 2015 at 9:34 PM, Maxim Solodovnik <[email protected] >>>> > wrote: >>>> >>>>> what is your config? >>>>> are you using SIMPLEBIND or SEARCHANDBIND? >>>>> >>>>> On Tue, Mar 24, 2015 at 8:16 AM, FJ <[email protected]> wrote: >>>>> >>>>>> I run the into the same issue as this hijenix <[email protected]>. >>>>>> Just can't figure it out. ldapsearch search result is fine but it alway >>>>>> said " >>>>>> Invalid password" when trying to login with an AD account. Had no >>>>>> issue on this on OM211 but OM304 does different. >>>>>> >>>>>> Please advise if you have any suggestion. >>>>>> >>>>>> On Fri, Feb 6, 2015 at 5:30 AM, Maxim Solodovnik < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> there were at least several successful configs reported to the >>>>>>> mailing lists >>>>>>> you can try to find them using search here: >>>>>>> http://openmeetings.markmail.org/ >>>>>>> >>>>>>> On Fri, Feb 6, 2015 at 6:33 PM, kaushal jani <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> its ok thanks for the help, if possible please provide me tested >>>>>>>> demo config file. >>>>>>>> >>>>>>>> i thinks its bug in openmeetings 3.3? >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 19:27:35 +0700 >>>>>>>> Subject: RE: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> I'm out of ideas :( >>>>>>>> >>>>>>>> WBR, Maxim >>>>>>>> (from mobile, sorry for the typos) >>>>>>>> On Feb 6, 2015 6:26 PM, "kaushal jani" <[email protected]> wrote: >>>>>>>> >>>>>>>> still get none user found in ldap with below settings >>>>>>>> >>>>>>>> ldap_search_query=(sAMAccountName=%1$s) >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> Subject: RE: None user found in LDAP >>>>>>>> Date: Fri, 6 Feb 2015 17:28:32 +0530 >>>>>>>> >>>>>>>> its working fine with below result >>>>>>>> >>>>>>>> # search result >>>>>>>> search: 2 >>>>>>>> result: 0 Success >>>>>>>> >>>>>>>> # numResponses: 2 >>>>>>>> # numEntries: 1 >>>>>>>> >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 18:51:46 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> then try >>>>>>>> >>>>>>>> ldapsearch -x -D "cn=test,cn=users,dc=demo,dc=dom" -w test123 -p >>>>>>>> 389 -h x.x.x.x -b "cn=users,dc=demo,dc=dom" -s sub "(sAMAccountN >>>>>>>> ame=*name_you_enter_in_login_here*)" >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 5:47 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> try with suggested but found none user in ldap again >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 18:40:38 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> great :) >>>>>>>> >>>>>>>> now try to set it like this: >>>>>>>> ldap_search_query=(sAMAccountName=%1$s) >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 5:38 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> as per ur suggesstion, when i change query parameter as per >>>>>>>> ldapsearch, got below error >>>>>>>> >>>>>>>> my new ldap_search_query=(objectClass=*) >>>>>>>> >>>>>>>> >>>>>>>> DEBUG 02-06 17:05:02.006 o.a.o.l.LdapLoginManagement:165 >>>>>>>> [http-nio-0.0.0.0-5080-exec-8] - LdapLoginmanagement.doLdapLogin >>>>>>>> ERROR 02-06 17:05:02.083 o.a.o.l.LdapLoginManagement:255 >>>>>>>> [http-nio-0.0.0.0-5080-exec-8] - *more than 1 user found in LDAP* >>>>>>>> INFO 02-06 17:05:02.084 o.a.d.l.c.a.LdapNetworkConnection:1870 >>>>>>>> [NioProcessor-146] - There is no future associated with the messageId >>>>>>>> 2, >>>>>>>> ignoring the message >>>>>>>> DEBUG 02-06 17:05:02.085 o.a.w.u.c.CookieUtils:266 >>>>>>>> [http-nio-0.0.0.0-5080-exec-8] - Unable to find Cookie with >>>>>>>> name=LoggedIn >>>>>>>> and request URI=signin?3-1.IBehaviorListener.1-signin >>>>>>>> DEBUG 02-06 17:05:02.090 o.a.w.f.FeedbackMessages:69 >>>>>>>> [http-nio-0.0.0.0-5080-exec-8] - Adding feedback message >>>>>>>> '[FeedbackMessage >>>>>>>> message = "Unknown error. Please report this to the administrator.", >>>>>>>> reporter = signin, level = ERROR]' >>>>>>>> DEBUG 02-06 17:05:02.091 o.a.w.u.c.CookieUtils:266 >>>>>>>> [http-nio-0.0.0.0-5080-exec-8] - Unable to find Cookie with >>>>>>>> name=LoggedIn >>>>>>>> and request URI=signin?3-1.IBehaviorListener.1-signin >>>>>>>> DEBUG 02-06 17:05:02.093 o.a.wicket.Page:871 >>>>>>>> [http-nio-0.0.0.0-5080-exec-8] - ending request for page [Page class = >>>>>>>> org.apache.openmeetings.web.pages.auth.SignInPage, id = 3, render >>>>>>>> count = >>>>>>>> 1], request >>>>>>>> org.apache.wicket.protocol.http.servlet.ServletWebRequest@1a0d08d >>>>>>>> DEBUG 02-06 17:05:02.094 o.a.wicket.Page:871 >>>>>>>> [http-nio-0.0.0.0-5080-exec-8] - ending request for page [Page class = >>>>>>>> org.apache.openmeetings.web.pages.auth.SignInPage, id = 3, render >>>>>>>> count = >>>>>>>> 1], request >>>>>>>> org.apache.wicket.protocol.http.servlet.ServletWebRequest@1a0d08d >>>>>>>> DEBUG 02-06 17:05:02.094 o.a.wicket.Page:871 >>>>>>>> [http-nio-0.0.0.0-5080-exec-8] - ending request for page [Page class = >>>>>>>> org.apache.openmeetings.web.pages.auth.SignInPage, id = 3, render >>>>>>>> count = >>>>>>>> 1], request >>>>>>>> org.apache.wicket.protocol.http.servlet.ServletWebRequest@1a0d08d >>>>>>>> DEBUG 02-06 17:05:02.105 >>>>>>>> o.a.w.p.AsynchronousDataStore$PageSavingRunnable:354 >>>>>>>> [Wicket-PageSavingThread] - Saving asynchronously: Entry >>>>>>>> [sessionId=61BAF900150CB93ECCCEBC5A922E4A4B, pageId=3]... >>>>>>>> DEBUG 02-06 17:05:02.105 o.a.w.p.DiskDataStore:186 >>>>>>>> [Wicket-PageSavingThread] - Storing data for page with id '3' in >>>>>>>> session >>>>>>>> with id '61BAF900150CB93ECCCEBC5A922E4A4B' >>>>>>>> >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 18:35:07 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> additionally ldapsearch uses IP address while OM config has name >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 5:31 PM, Maxim Solodovnik < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>> As I can see >>>>>>>> ldap_search_query=(&(objectCategory=person)(objectClass=person)( >>>>>>>> sAMAccountName=%1$s)) >>>>>>>> differs from ldapsearch parameters >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 5:28 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> ldap_server_type=AD >>>>>>>> ldap_conn_host=test.demo.dom >>>>>>>> ldap_conn_port=389 >>>>>>>> ldap_conn_secure=false >>>>>>>> >>>>>>>> ldap_admin_dn=cn=test,cn=users,dc=demo,dc=dom >>>>>>>> >>>>>>>> ldap_passwd=***** >>>>>>>> >>>>>>>> ldap_search_base=cn=users,dc=demo,dc=dom >>>>>>>> >>>>>>>> >>>>>>>> ldap_search_query=(&(objectCategory=person)(objectClass=person)(sAMAccountName=%1$s)) >>>>>>>> >>>>>>>> ldap_search_scope= SUBTREE >>>>>>>> >>>>>>>> ldap_auth_type=SEARCHANDBIND >>>>>>>> >>>>>>>> ldap_userdn_format=sAMAccountName=%s,cn=users,dc=demo,dc=dom >>>>>>>> ldap_provisionning=NONE >>>>>>>> ldap_use_admin_to_get_attrs=true >>>>>>>> ldap_sync_password_to_om=false >>>>>>>> ldap_user_attr_firstname=givenName >>>>>>>> ldap_user_attr_mail=mail >>>>>>>> ldap_user_attr_street=streetAddress >>>>>>>> ldap_user_attr_additionalname=description >>>>>>>> ldap_user_attr_fax=facsimileTelephoneNumber >>>>>>>> ldap_user_attr_zip=postalCode >>>>>>>> ldap_user_attr_country=co >>>>>>>> ldap_user_attr_town=l >>>>>>>> ldap_user_attr_phone=telephoneNumber >>>>>>>> ldap_use_lower_case=false >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 18:21:02 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> and your final OM config? >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 5:20 PM, Maxim Solodovnik < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>> ant your final OM config? >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 5:18 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> ldapsearch -x -D "cn=test,cn=users,dc=demo,dc=dom" -w test123 -p >>>>>>>> 389 -h x.x.x.x -b "cn=users,dc=demo,dc=dom" -s sub "(objectclass=*)" >>>>>>>> >>>>>>>> with below result >>>>>>>> >>>>>>>> # search result >>>>>>>> search: 2 >>>>>>>> result: 0 Success >>>>>>>> >>>>>>>> # numResponses: 62 >>>>>>>> # numEntries: 61 >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 18:06:07 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> show me your ldapsearch command >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 5:03 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> please help me i am stuck at this stage from last 3 days.... >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 17:57:02 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> I have no time for it, sorry >>>>>>>> Maybe someone else can help >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 4:53 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> if possible can you take teamviwer for it? >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 17:49:57 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> if ldapsearch works and OM is not, then there are some differences. >>>>>>>> >>>>>>>> I can't tell you what is wrong with your config since I don't have >>>>>>>> access to your LDAP server >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 4:46 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> please also tell me my config file is ok? >>>>>>>> >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 17:44:29 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> then it should work with OM as well >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 4:42 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> ldapsearch working fine with exact copy of config file >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> Subject: RE: None user found in LDAP >>>>>>>> Date: Fri, 6 Feb 2015 16:11:00 +0530 >>>>>>>> >>>>>>>> >>>>>>>> hi, >>>>>>>> >>>>>>>> i tried with exact copy from config its working fine >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 17:11:23 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> please try to use "ldapsearch" with the exact values from your >>>>>>>> config >>>>>>>> is it working? >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 4:04 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> i tried lower case but same result >>>>>>>> >>>>>>>> none user found in ldap >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 16:59:08 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> I see couple of issues here >>>>>>>> 1) in you config LDAP DN is UPPER CASE, in your command line test >>>>>>>> it is mixed case >>>>>>>> 2) in your config search_base is CN=Users,DC=DEMO,DC=DOM, in >>>>>>>> command line it is: dc=DEMO,dc=DOM >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 3:55 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> yes its working fine..... >>>>>>>> >>>>>>>> when i try ldapserach with below command then its working fine >>>>>>>> >>>>>>>> ldapsearch -x -D "cn=test,cn=Users,dc=demo,dc=dom" -w demo123 -p >>>>>>>> 389 -h test.demo.dom -b "dc=DEMO,dc=DOM" -s sub "(objectclass=*)" >>>>>>>> >>>>>>>> ------------------------------ >>>>>>>> Date: Fri, 6 Feb 2015 16:50:55 +0700 >>>>>>>> Subject: Re: None user found in LDAP >>>>>>>> From: [email protected] >>>>>>>> To: [email protected] >>>>>>>> >>>>>>>> Have you tried to use LDAPExplorer and check >>>>>>>> 1) admin creadentials >>>>>>>> 2) search >>>>>>>> >>>>>>>> On Fri, Feb 6, 2015 at 3:47 PM, kaushal jani <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>> please help me regarding my configuration for LDAP. >>>>>>>> >>>>>>>> my config file is as below >>>>>>>> >>>>>>>> ldap_server_type=AD >>>>>>>> ldap_conn_host=test.demo.dom >>>>>>>> ldap_conn_port=389 >>>>>>>> ldap_conn_secure=false >>>>>>>> >>>>>>>> ldap_admin_dn=CN=test,CN=Users,DC=DEMO,DC=DOM >>>>>>>> >>>>>>>> ldap_passwd=***** >>>>>>>> >>>>>>>> ldap_search_base=CN=Users,DC=DEMO,DC=DOM >>>>>>>> >>>>>>>> >>>>>>>> ldap_search_query=(&(objectCategory=person)(objectClass=person)(sAMAccountName=%1$s)) >>>>>>>> >>>>>>>> ldap_search_scope= SUBTREE >>>>>>>> >>>>>>>> ldap_auth_type=SEARCHANDBIND >>>>>>>> >>>>>>>> ldap_userdn_format=sAMAccountName=%s,CN=Users,DC=DEMO,DC=DOM >>>>>>>> ldap_provisionning=NONE >>>>>>>> ldap_use_admin_to_get_attrs=true >>>>>>>> ldap_sync_password_to_om=false >>>>>>>> ldap_user_attr_firstname=givenName >>>>>>>> ldap_user_attr_mail=mail >>>>>>>> ldap_user_attr_street=streetAddress >>>>>>>> ldap_user_attr_additionalname=description >>>>>>>> ldap_user_attr_fax=facsimileTelephoneNumber >>>>>>>> ldap_user_attr_zip=postalCode >>>>>>>> ldap_user_attr_country=co >>>>>>>> ldap_user_attr_town=l >>>>>>>> ldap_user_attr_phone=telephoneNumber >>>>>>>> ldap_use_lower_case=false >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> WBR >>>>>>>> Maxim aka solomax >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> WBR >>>>>>> Maxim aka solomax >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> jt >>>>>> ________________________________ >>>>>> John Tran >>>>>> Northern California, CA >>>>>> [email protected] >>>>>> ICQ IM: 27741710 >>>>>> AOL IM: find1ngj0hn >>>>>> Yahoo! IM: findingj0hn >>>>>> MSN IM: [email protected] >>>>>> >>>>> >>>>> >>>>> >>>>> -- >>>>> WBR >>>>> Maxim aka solomax >>>>> >>>> >>>> >>>> >>>> -- >>>> jt >>>> ________________________________ >>>> John Tran >>>> Northern California, CA >>>> [email protected] >>>> ICQ IM: 27741710 >>>> AOL IM: find1ngj0hn >>>> Yahoo! IM: findingj0hn >>>> MSN IM: [email protected] >>>> >>> >>> >>> >>> -- >>> WBR >>> Maxim aka solomax >>> >> >> >> >> -- >> jt >> ________________________________ >> John Tran >> Northern California, CA >> [email protected] >> ICQ IM: 27741710 >> AOL IM: find1ngj0hn >> Yahoo! IM: findingj0hn >> MSN IM: [email protected] >> > > > > -- > WBR > Maxim aka solomax > -- jt ________________________________ John Tran Northern California, CA [email protected] ICQ IM: 27741710 AOL IM: find1ngj0hn Yahoo! IM: findingj0hn MSN IM: [email protected]
