Jeff,
Ensure the OpenMeetings server is running by using:
#> ps aux | grep red5
It will give the process ID and the command used to start the OM+red5
server.
Also, open the port#s: 5080, 1935, 8088 in Centos iptables, as well as
in your router Firewall.
Hope this helps.
Susheel Jalali
[email protected]_
Web site:<http://www.coscend.com/>www.Coscend.com
------------------------------------------------------------------
CONFIDENTIALITY NOTICE: See 'Confidentiality Notice Regarding E-mail
Messages from Coscend Communications Solutions' posted at:
<http://www.coscendcommunications.com/Terms_and_Conditions.html>http://www.Coscend.com/Terms_and_Conditions.html
On 09/28/15 00:24, Jeff Clay wrote:
running netstat –a | grep 80 doesn’t show anything listening on port
80 or port 5080.
[root@myconf ~]# netstat -a | grep 80
unix 2 [ ACC ] STREAM LISTENING 14680
/var/run/NetworkManager/private-dhcp
unix 2 [ ACC ] STREAM LISTENING 15802 private/proxymap
unix 2 [ ACC ] STREAM LISTENING 15805 private/proxywrite
unix 2 [ ACC ] STREAM LISTENING 15808 private/smtp
unix 3 [ ] STREAM CONNECTED 15806
unix 3 [ ] STREAM CONNECTED 15801
unix 3 [ ] STREAM CONNECTED 15809
unix 3 [ ] STREAM CONNECTED 15804
unix 3 [ ] STREAM CONNECTED 15800
unix 3 [ ] STREAM CONNECTED 15803
unix 2 [ ] DGRAM 27180
unix 3 [ ] STREAM CONNECTED 15807
[root@myconf ~]#
*From:* Jeff Clay
*Sent:* Sunday, September 27, 2015 1:33 PM
*To:* [email protected]
*Subject:* unable to reach install url after installation
It’s been quite a while since I’ve used OM. I thought I’d check it out
again… Below is the script I used to install, it’s my own script, I
updated it after reading the requirements
http://openmeetings.apache.org/installation.html . Everything seems to
start fine when I run red5.sh. I’m not seeing any errors. However, I
can’t access the install URL. Any ideas? BTW, this is on CentOS 7 64bit.
Here is an excerpt of OM saying it’s started
[INFO] [Launcher:/openmeetings] org.red5.server.Server - Add mapping
global: default host: 127.0.0.1 context: openmeetings
DEBUG 09-26 21:23:00.307 ScopeApplicationAdapter.java 4461 125
org.apache.openmeetings.remote.red5.ScopeApplicationAdapter
[Launcher:/openmeetings] - webAppPath : /opt/om/webapps/openmeetings
WARN 09-26 21:23:02.703 ConfigurationDao.java 6857 123
org.apache.openmeetings.db.dao.basic.ConfigurationDao
[Launcher:/openmeetings] - Could not find key in configuration
CONF_KEY: crypt_ClassName
DEBUG 09-26 21:23:02.739 EmoticonsManager.java 6893 62
org.apache.openmeetings.data.whiteboard.EmoticonsManager
[Launcher:/openmeetings] - ##### loadEmot completed
DEBUG 09-26 21:23:02.743 Version.java 6897 96
org.apache.openmeetings.util.Version [Launcher:/openmeetings] -
##################################################
# Openmeetings is up #
# 3.0.7-RELEASE 1704681 23-September-2015 #
# and ready to use #
##################################################
Here is how I installed OM
#/bin/bash
sed -i -e 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/sysconfig/selinux
sed -i -e 's/SELINUX=permissive/SELINUX=disabled/g' /etc/sysconfig/selinux
service firewalld stop
chkconfig firewalld off
rm -rf /root/om
rm -rf /root/prereqs
rm -rf /opt/red5sip
rm -rf /opt/om
rm -rf /root/prereqs/ffmpeg_sources
mkdir /opt/red5sip | mkdir /opt/om | mkdir /root/om | mkdir /root/prereqs
mkdir /root/prereqs/jdk | mkdir /root/prereqs/red5sip | mkdir
/root/prereqs/ffmpeg_sources
yum install epel-release -y
yum update -y
yum install wget vim mysql-server mlocate ImageMagick ghostscript
swftools unzip ant svn sox ntp mysql-connector-odbc autoconf automake
cmake freetype-devel gcc gcc-c++ git libtool make mercurial nasm
pkgconfig zlib-devel -y
cd /root/om
wget
http://apache.claz.org/openmeetings/3.0.7/bin/apache-openmeetings-3.0.7.tar.gz
cp -rf /root/om/apache-openmeetings-3.0.7.tar.gz /opt/om
cd /opt/om
tar -xf apache-openmeetings-3.0.7.tar.gz
rm -f apache-openmeetings-3.0.7.tar.gz
cd /root/prereqs
wget
https://jodconverter.googlecode.com/files/jodconverter-core-3.0-beta-4-dist.zip
unzip jodconverter-core-3.0-beta-4-dist.zip
mkdir /usr/lib/jodconverter
cp -rf /root/prereqs/jodconverter-core-3.0-beta-4/* /usr/lib/jodconverter/
yum remove java* *openjdk -y
cd /root/prereqs/jdk
#wget --no-cookies --header "Cookie:
gpw_e24=http%3A%2F%2Fwww.oracle.com"
"http://download.oracle.com/otn-pub/java/jdk/7u17-b02/jdk-7u17-linux-x64.rpm";
wget --no-cookies --no-check-certificate --header "Cookie:
gpw_e24=http%3A%2F%2Fwww.oracle.com%2F;
oraclelicense=accept-securebackup-cookie"
"http://download.oracle.com/otn-pub/java/jdk/8u60-b27/jdk-8u60-linux-x64.rpm";
mv -f /root/prereqs/jdk/* /root/prereqs/jdk/jdk8.rpm
yum remove jdk*
yum localinstall jdk8.rpm
cd /etc/alternatives
yum install libreoffice -y
rm -f /etc/alternatives/java
ln -s /usr/java/jdk1.8.0_60/bin/java java
export JAVA_HOME=/usr/java/latest
cd /root/prereqs/ffmpeg_sources
git clone --depth 1 git://github.com/yasm/yasm.git
cd yasm
autoreconf -fiv
./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin"
make
make install
make distclean
cd /root/prereqs/ffmpeg_sources
git clone --depth 1 git://git.videolan.org/x264
cd x264
./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin"
--enable-static
make
make install
make distclean
cd /root/prereqs/ffmpeg_sources
hg clone
<https://bitbucket.org/multicoreware/x265>https://bitbucket.org/multicoreware/x265
cd /root/prereqs/ffmpeg_sources/x265/build/linux
cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build"
-DENABLE_SHARED:bool=off ../../source
make
make install
cd /root/prereqs/ffmpeg_sources
git clone --depth 1 git://git.code.sf.net/p/opencore-amr/fdk-aac
cd fdk-aac
autoreconf -fiv
./configure --prefix="$HOME/ffmpeg_build" --disable-shared
make
make install
make distclean
cd /root/prereqs/ffmpeg_sources
curl -L -O
http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar xzvf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin"
--disable-shared --enable-nasm
make
make install
make distclean
cd /root/prereqs/ffmpeg_sources
curl -O
<http://downloads.xiph.org/releases/ogg/libogg-1.3.2.tar.gz>http://downloads.xiph.org/releases/ogg/libogg-1.3.2.tar.gz
tar xzvf libogg-1.3.2.tar.gz
cd libogg-1.3.2
./configure --prefix="$HOME/ffmpeg_build" --disable-shared
make
make install
make distclean
cd /root/prereqs/ffmpeg_sources
curl -O
<http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.4.tar.gz>http://downloads.xiph.org/releases/vorbis/libvorbis-1.3.4.tar.gz
tar xzvf libvorbis-1.3.4.tar.gz
cd libvorbis-1.3.4
LDFLAGS="-L$HOME/ffmeg_build/lib"
CPPFLAGS="-I$HOME/ffmpeg_build/include" ./configure
--prefix="$HOME/ffmpeg_build" --with-ogg="$HOME/ffmpeg_build"
--disable-shared
make
make install
make distclean
cd /root/prereqs/ffmpeg_sources
git clone --depth 1 https://chromium.googlesource.com/webm/libvpx.git
<https://chromium.googlesource.com/webm/libvpx.git>
cd libvpx
./configure --prefix="$HOME/ffmpeg_build" --disable-examples
make
make install
make clean
cd /root/prereqs/ffmpeg_sources
git clone --depth 1 git://source.ffmpeg.org/ffmpeg
cd ffmpeg
PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure
--prefix="$HOME/ffmpeg_build"
--extra-cflags="-I$HOME/ffmpeg_build/include"
--extra-ldflags="-L$HOME/ffmpeg_build/lib" --bindir="$HOME/bin"
--pkg-config-flags="--static" --enable-gpl --enable-nonfree
--enable-libfdk-aac --enable-libfreetype --enable-libmp3lame
--enable-libvorbis --enable-libvpx --enable-libx264 --enable-libx265
make
make install
make distclean
hash -r
chkconfig ntp on
service ntpd start
updatedb
init 6
I also went back and ran the following commands, thinking that it
needed a little bit of configuring before it would work.
sed -i -e '87 c\<currentappname>MyConf\ Conferencing</currentappname>'
/opt/om/webapps/openmeetings/public/config.xml
sed -i -e '93
c\<currentappnameurl>http://myconf.cyient.com</currentappnameurl
<http://myconf.cyient.com%3c/currentappnameurl>>'
/opt/om/webapps/openmeetings/public/config.xml
sed -i -e '99
c\<currentappnamebugurl>mailto:[email protected]</currentappnamebugurl
<mailto:[email protected]%3c/currentappnamebugurl>>'
/opt/om/webapps/openmeetings/public/config.xml
sed -i -e '67 c\<red5httpport>80</red5httpport>'
/opt/om/webapps/openmeetings/public/config.xml
------------------------------------------------------------------------
DISCLAIMER:
This email may contain confidential information and is intended only
for the use of the specific individual(s) to which it is addressed. If
you are not the intended recipient of this email, you are hereby
notified that any unauthorized use, dissemination or copying of this
email or the information contained in it or attached to it is strictly
prohibited. If you received this message in error, please immediately
notify the sender at Cyient and delete the original message.
------------------------------------------------------------------------
To preserve the environment, please don't print this e-mail unless you
really need to.
No virus found in this message.
Checked by AVG - www.avg.com <http://www.avg.com>
Version: 2015.0.6140 / Virus Database: 4419/10711 - Release Date: 09/27/15
