Thanks for the reply - good to know it will work
I've been following setup from here
I assume the Asterisk config section will remain the same (I'll probably need
to tweak some setting on the existing PBX), and I would just change the
red5.host section of /opt/red5sip/settings.properties?
From: "Jeff Clay" <jeff.c...@cyient.com>
Sent: Monday, October 17, 2016 4:58:36 PM
Subject: Re: VOIP config with external Asterisk server
It is possible and quite easy. What questions do you have? Unfortunately, I
don’t have much time for going through a lot of specifics but I can hopefully
point you in the right direction.
On Oct 16, 2016, at 10:55 PM, Jodi Thomson < j...@webconnect.nz > wrote:
I've been working with integrating OM 3 with Asterisk as per documentation.
However this requires Asterisk install on same server as OM
Has any one managed to get it working with a preexisting external Asterisk
based PBX? It looks doable but can't experiment with our existing PBX and don't
want to spin up another for testing if it's not possible
This email message is for the sole use of the intended recipient(s) and may
contain confidential and privileged information. Any unauthorized review, use,
disclosure or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email and destroy all copies of
the original message. Check all attachments for viruses before opening them.
All views or opinions presented in this e-mail are those of the author and may
not reflect the opinion of Cyient or those of our affiliates.