Hello,
unfortunately I'm not really good in setting up Asterisk :(

According the pin, have you set it in Admin->Rooms->Room?

On Wed, Mar 1, 2017 at 4:21 AM, Lance Oreste <[email protected]>
wrote:

> Here is a little bit more information on this.
>
> It does not ask me for for a pin number, not sure which context I should
> route my inbound to.
>
>
>
> Here is my sip.conf
>
> [general]
>
> context=rooms-originate                   ; Default context for incoming
> calls. Defaults to 'default'
>
> allowoverlap=no                 ; Disable overlap dialing support.
> (Default is yes)
>
>
>
> udpbindaddr=0.0.0.0             ; IP address to bind UDP listen socket to
> (0.0.0.0 binds to all)
>
>
>
> tcpenable=no                    ; Enable server for incoming TCP
> connections (default is no)
>
> tcpbindaddr=0.0.0.0             ; IP address for TCP server to bind to
> (0.0.0.0 binds to all interfaces)
>
>                                 ; Optionally add a port number,
> 192.168.1.1:5062 (default is port 5060)
>
> transport=udp                   ; Set the default transports.  The order
> determines the primary default transport.
>
>                                 ; If tcpenable=no and the transport set
> is tcp, we will fallback to UDP.
>
> srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls
>
> qualify=yes
>
> maxexpiry=43200
>
> videosupport=yes
>
> rtcachefriends=yes
>
>
>
> [red5sip_user]
>
> type=friend
>
> secret=12345
>
> disallow=all
>
> allow=ulaw
>
> allow=h263
>
> host=dynamic
>
> nat=force_rport,comedia
>
> context=rooms-red5sip
>
>
>
>
>
> [kamailio]
>
> disallow=all
>
> allow=ulaw
>
> canreinvite=no
>
> dtmfmode=rfc2833
>
> host=10.101.10.60
>
> insecure=very
>
> port=5060
>
> qualify=yes
>
> type=friend
>
>
>
>
>
>
>
> *From:* Lance Oreste [mailto:[email protected]]
> *Sent:* Tuesday, February 28, 2017 1:12 PM
> *To:* [email protected]
> *Subject:* conference waiting on leader
>
>
>
> I configured openmeetings with asterisk integration. However, I am
> “Conference will begin when the leader arrives” when I call the conference
> number eventhough the leader is already in conference.
>
>
>
> Connected to Asterisk GIT-13-13.12.2-311-g56e925f currently running on
> ghwconference1 (pid = 24972)
>
>   == Using SIP RTP CoS mark 5
>
>     -- Executing [40018@rooms-originate:1] ConfBridge("SIP/kamailio-00000004",
> "40018,default_bridge,sip_user") in new stack
>
>    -- Channel CBAnn/40018-00000004;2 joined 'softmix' base-bridge
> <6df5dfea-ce6c-4733-99fe-d73a45b2a13c>
>
>     -- <SIP/kamailio-00000004> Playing 'conf-waitforleader.slin' (language
> 'en')
>
>     -- Started music on hold, class 'default', on channel
> 'SIP/kamailio-00000004'
>
>     -- Channel SIP/kamailio-00000004 joined 'softmix' base-bridge
> <6df5dfea-ce6c-4733-99fe-d73a45b2a13c>
>
>     -- <CBAnn/40018-00000004;1> Playing 'confbridge-join.slin' (language
> 'en')
>
>
>
> Here is my config for /opt/red5sip/settings.properties
>
>   GNU nano 2.5.3      File: /opt/red5sip/settings.properties
>
>
>
> red5.host=127.0.0.1
>
> om.context=rooms
>
> red5.codec=asao
>
> red5.codec.rate=22
>
> sip.obproxy=127.0.0.1
>
> sip.phone=red5sip_user
>
> sip.authid=red5sip_user
>
> sip.secret=12345
>
> sip.realm=asterisk
>
> sip.proxy=127.0.0.1
>
> rooms.forceStart=yes
>
> rooms=18,14,12,13,2
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *In great health,*
>
>
>
>
> *Lance Oreste Telecommunications Engineer II Information Technology
> Department Great HealthWorks, Inc.*
>
>
> www.GreatHealthWorks.com <http://www.greathealthworks.com>
>
>
>
> *4150 SW 28th Way Fort Lauderdale, FL 33312 Office Phone:954-744-7400 ext:
> 1155 TollFree: 800-488-8082 ext: 1155 Direct Dial: Fax: 954-707-5081*
>
> *Disclaimer:*_-*************************************************-_
> This e-mail message contains confidential, privileged information intended
> solely for the addressee. Please do not read, copy, or disseminate it
> unless you are the addressee. If you have received it in error, please call
> and speak with the message sender. Also, we would appreciate your
> forwarding the message back to us and deleting it from your system. Every
> effort has been made to ensure that any attachment to this mail does not
> contain a virus. While we have taken every reasonable precaution to
> minimize this risk, neither it nor the sender can accept liability for any
> damage which you sustain as a result of software viruses. Please rely on
> your own virus check as no responsibility is taken by the sender for any
> damage arising out of any virus infection this communication may contain.
> This e-mail and all other electronic (including voice) communications from
> the sender's firm are for informational purposes only. No such
> communication is intended by the sender to constitute either an electronic
> record or an electronic signature or to constitute any agreement by the
> sender to conduct a transaction by electronic means. Any such intention or
> agreement is hereby expressly disclaimed unless otherwise specifically
> indicated.
>
>



-- 
WBR
Maxim aka solomax

Reply via email to