Hello Julian,
Which OS are you  running? Have you edited
.../WEB-INF/classes/applicationContext.xml file?
Regards,
Partha

On Mon, Apr 27, 2020 at 2:08 AM Julian Weiß <[email protected]> wrote:

> Hello,
> I'M using a NAT-Router but all ports are open. Openmeetings is already
> reachable with https.
>
> Am 26.04.20, 22:35 schrieb "ratatouille" <[email protected]>:
>
>     Hello!
>
>     Julian Weiß <[email protected]> schrieb am 26.04.20 um 20:22:27 Uhr:
>
>     > Hey there thanks for your reply. Tried it but no results Audio and
> video is still missing.
>     > The turnserver is working but only under sudo rights --- is that OK?
>
>     netstat -pantu |grep turn
>
>     What kind of firewall are you using and how does your
> network-structure look like?
>
>     > And I found the log..
>     > WARNING: cannot find certificate file: turn_server_cert.pem (1)
>     > 0: WARNING: cannot start TLS and DTLS listeners because certificate
> file is not set properly
>     > 0: WARNING: cannot find private key file: turn_server_pkey.pem (1)
>     > 0: WARNING: cannot start TLS and DTLS listeners because private key
> file is not set properly
>     > Might it be possible, that this is the reason I can't get any audio
> or video.
>
>     No, as far as I understand openmeetings uses a selfsigned certificate
> if you didn't configure
>     it to use yours. Is openmeetings reachable with https?
>
>     > I've tried letsencrypt but there themes to be a broken package so
> that I can't create a ssl certificate  any other ideas how to create certs?
>     > Thanks a lot for all your great help you all doing such a great job
>     >
>     > Am 26.04.20, 21:25 schrieb "ratatouille" <[email protected]
> >:
>     >
>     >     Hello!
>     >
>     >     Partha Datta <[email protected]> schrieb am 24.04.20 um
> 00:34:14 Uhr:
>     >
>     >     > I have installed OpenMeetings 5.0.0-M3. It is working in LAN
> both audio &
>     >     > video.
>     >     > I have Openmeeting server  behind a Linux firewall with NAT
> and opened up
>     >     > 5443 & 8888 ports. I can not see or hear the meeting
> participants nor he
>     >     > can see me or hear.
>     >
>     >     Is this firewall running on the same host like openmeetings? Is
> this firewalld?
>     >     What does iptables -nL say on the firewall host?
>     >
>     >     > The setup test, I can see my own voice and video.
>     >     > Here is my nat table
>     >     > rule family="ipv4" destination address="112.73.210.134"
> forward-port
>     >     > port="5443" protocol="tcp" to-port="5443"
> to-addr="192.168.110.16"
>     >     > rule family="ipv4" destination address="112.73.210.134"
> forward-port
>     >     > port="8888" protocol="tcp" to-port="8888"
> to-addr="192.168.110.16"
>     >     >
>     >     > public
>     >     >   target: default
>     >     >   icmp-block-inversion: no
>     >     >   interfaces:
>     >     >   sources:
>     >     >   services: mdns dhcpv6-client
>     >     >   ports: 53/udp 5080/tcp 1935/tcp 5443/tcp
>     >     >   protocols:
>     >     >   masquerade: no
>     >     >   forward-ports:
>     >     >   source-ports:
>     >     >   icmp-blocks:
>     >     >   rich rules:
>     >
>     >       Andreas
>
>

-- 
Partha
M +91-8825608651
Sent from mobile device
"If you worried about falling off the bike, you’d never..."

Reply via email to