Hello Gerald, It i do is: # systemctl enable docker.service ...that is for auto boot docker. # Build a script to auto-run kms and coturm (turn server): nano /etc/init.d/boot ...and copy-paste inside: #!/bin/bashdocker start kms/etc/init.d/coturn start ...you can add /etc/init.d/tomcat3 start ...and pressCtrl+X...will ask if save...press Y and ENTER to exit nano editor. Now give execution permission: chmod +x /etc/init.d/boot ...and a link to this script for running when boot: ln -s /etc/init.d/boot /etc/rc3.d/S98boot All this works for me in Ubuntu 20.04
----------------- El lun, 14-09-2020 a las 12:41 +0000, Rohrbach, Gerald escribió: > I reinstalled my open meeting server with actual version. > The manual is nearly perfect from Alvaros. > > I missed the part to start the kms docker automatically after > rebooting machine. > It seems also that the tomcat3 script does not autostart. > > Can someone point me in the right direction. I´m running Ubuntu > 20.04. > > Thanks > Gerald > > > > Von: dww [mailto:[email protected]] > > > Gesendet: Samstag, 12. September 2020 21:35 > > An: [email protected] > > Betreff: Re: Installation issue with Kurento Media Server > > > > > Hi, > > > > > > I am at a loss on what to do. I checked all the log files I could > find and the error below from the log file for the kms docker > container is the only thing I could find but I followed the tutorial > for applicationContext.xml. > > > The only strange thing I saw was that in /opt/logs, I see log files > openmeetings.log and like openmeetings.2020-08-30.0.log however they > have not been written to since 8/31/2020. > > > > > > Any other suggestions? I would like to get this working for a small > non-profit group so we can avoid using Zoom. > > > > > > Should I do a direct install of KMS instead of using the docker > container? However, I surmise that alot of users got this to work. > > > > > > Thanks, > > > > > > Dennis > > > > > > > > > > > > > > > > > > On Tue, 2020-09-08 at 09:44 +0700, Maxim Solodovnik wrote: > > > > > > > > > > > > > > > On Tue, 8 Sep 2020 at 09:39, dww <[email protected]> wrote: > > > > > In /var/lib/docker/containers/ I opened the Json file with the > > > docker container for KMS in the file name. > > > > > > > > > > > > > > > > > > In that file I see around the time of the failure: > > > > > > > > > {"log":"5:29:26.856026045 1 0x7f9618004430 INFO > > > KurentoWebRtcEndpointImpl > > > WebRtcEndpointImpl.cpp:104:remove_not_supported_codecs_from_array > > > :\u003ckmswebrtcendpoint1\u003e Removing not supported codec > > > 'AMR/8000'\n","stream":"stderr","time":"2020-09- > > > 08T02:12:56.902103176Z"} > > > {"log":"5:29:26.868700168 1 0x7f9618004430 INFO > > > KurentoWebRtcEndpointImpl > > > WebRtcEndpointImpl.cpp:540:WebRtcEndpointImpl: STUN port not > > > found in config; using default value: > > > 3478\n","stream":"stderr","time":"2020-09- > > > 08T02:12:56.914764538Z"} > > > {"log":"5:29:26.869257940 1 0x7f9618004430 INFO > > > KurentoWebRtcEndpointImpl > > > WebRtcEndpointImpl.cpp:548:WebRtcEndpointImpl: STUN server not > > > found in config; remember that NAT traversal requires STUN or > > > TURN\n","stream":"stderr","time":"2020-09-08T02:12:56.91519092Z"} > > > {"log":"5:29:26.869322090 1 0x7f9618004430 INFO > > > KurentoWebRtcEndpointImpl > > > WebRtcEndpointImpl.cpp:571:WebRtcEndpointImpl: TURN server not > > > found in config; remember that NAT traversal requires STUN or > > > TURN\n","stream":"stderr","time":"2020-09-08T02:12:56.91523371Z"} > > > > > > > > > > > > It appears that the STUN port and server, and the TURN server are > > > not found in the config. I don't understand I followed the > > > directions in the tutorial? > > > > > > > > > > > > > > > > > > Are they referring to the file: > > > var/lib/docker/containers/{container no}\config.v2.json? In there > > > I see > > > > > > > > > > > > "KMS_MTU=","KMS_EXTERNAL_ADDRESS=","KMS_NETWORK_INTERFACES=","KMS > > > _STUN_IP=","KMS_STUN_PORT=","KMS_TURN_URL="] > > > > > > Do these need to filled in manually? > > > > > > > > > > > > > > > > well, > > > > > > i was unable to provide STUN/TURN to KMS (it doesn't work for me) > > > > > > this is why it is configured in applicationContext.xml > > > > > > > > Thanks, > > > Dennis > > > > > > > > > > > > On Mon, 2020-09-07 at 21:59 -0400, dww wrote: > > > > > > > > > > > > > > > > > > > This is frustrating , I checked docker ps and got: > > > > > > > > > > > > CONTAINER > > > > ID IMAGE COMMAND CR > > > > EATED STATUS PORTS > > > > NAMES > > > > > > > > > > > > 518e88f02d50 kurento/kurento-media- > > > > server "/entrypoint.sh" 7 days ago Up 5 hours > > > > (healthy) 0.0.0.0:8888->8888/tcp kms > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > However is see no folder named /var/log/kurento-media-server > > > > and therefore no log files > > > > > > > > > > > > > > > > > > > > > > > > Also where I installed OM: /opt/open500/logs I see no file > > > > openmeetings.log, I see file that start with catalina, host- > > > > manager, localhose, localhose_access_log, manager. But there is > > > > no error in those as far as I can see. In syslog there > > > > was a problem with rabbitmq-server which I solved but I think > > > > is unrelated. > > > > > > > > > > > > > > > > > > > > > > > > Why am I seeing no OM or KMS log files? > > > > > > > > > > > > > > > > > > > > > > > > Dennis > > > > > > > > > > > > On Mon, 2020-09-07 at 09:45 +0700, Maxim Solodovnik wrote: > > > > > > > > > > > > > > Hello Dennis, > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 7 Sep 2020 at 02:39, dww <[email protected]> > > > > > wrote: > > > > > > > > > > > On Thu, 2020-09-03 at 22:39 +0700, Maxim Solodovnik wrote: > > > > > > > > > > > > > What is the client OS/browser? > > > > > > > > > > > > > > > > > > > Tried on laptop with PureOS , debian derived distro and > > > > > > with PureBrowser a derivative of Firefox > > > > > > > > > > > > > > > > > > Also tried on 64 bit Windows 10 laptop with both Firefox > > > > > > and Chrom > > > > > > > > > > > > > > > > > > Same problem with both. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1-2 clients usually works without issues > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Do you have enough resources on server? > > > > > > > > > > > > > > > > > > > > > > > > > > I have OM and KMS installed on a Linode (VM) with 8GB, 4 > > > > > > Cores, 160 GB SSD storage, Network Transfer-5TB, Network > > > > > > In-40Gpbs, Network Out-5000Mbps > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 8GB might be not enough, start/stop params and logs need to > > > > > be examined > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Can you check OM and KMS logs? are there any errors? > > > > > > > > > > > > > > > > > > > > > > > > > > Sorry to ask, but are the locations of the logs on the > > > > > > server? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > OM logs are here: ${OM_HOME}/logs/openmeetings.log > > > > > > > > > > > > > > > KMS logs are in /var/log/kurento-media-server/ (I would > > > > > recommend to stop KMS, clean log dir, start it and then try > > > > > to reproduce) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Additionally system logs can be checked something > > > > > like: /var/log/syslog > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In case KMS is being disconnected it might be > > > > > > > > > > > > > > > 1) KMS crash (usually being reported to /var/log/kurento- > > > > > media-server/error* ) > > > > > > > > > > > > > > > 2) system kill the process due to lack of resources (should > > > > > be in system logs) > > > > > > > > > > > > > > > 3) something else ... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > > Dennis > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, 1 Sep 2020 at 23:31, dww <[email protected]> > > > > > > > wrote: > > > > > > > > > > > > > > > Hello all, > > > > > > > > > > > > > > > > > > > > > > > > I followed the steps in the tutorial for SSL > > > > > > > > certificates and Coturn. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > After restarting I now can get my video and audio to > > > > > > > > show up in the room, but after about a minute the video > > > > > > > > and audio suddenly go away and I get the error message > > > > > > > > "Media server connection for user {firstname lastname} > > > > > > > > is failed, will try > > > > > > > > to reconnect." > > > > > > > > > > > > > > > > > > > > > > > > If I try to reallow withWebRTC, the same behavior > > > > > > > > repeats. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Dennis > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 2020-08-31 at 08:02 +0200, Alvaro wrote: > > > > > > > > > > > > > > > > > Please Dww, read the tutorial, after install > > > > > > > > > kurento, is a link: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Download Installation SSL certificates and Coturn for > > > > > > > > > OpenMeetings 5.0.0 on Debian 10 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Download it and follow it from step 5. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > .................... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > El dom, 30-08-2020 a las 23:39 -0400, dww escribió: > > > > > > > > > > > > > > > > > > > Ok I killed the process 517 then then I was able to > > > > > > > > > > run the docker container for KMS and start it. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > In OpenMeetings I entered a room and tried to add > > > > > > > > > > my video and audio but received the error: "Media > > > > > > > > > > server is inaccessible." for both video and audio. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Does this indicate that I need to configure a > > > > > > > > > > STUN/TURN server? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Dennis > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 2020-08-31 at 08:06 +0700, Maxim Solodovnik > > > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > You have some java process with PID 517already > > > > > > > > > > > listening port 8888 > > > > > > > > > > > > > > > > > > > > > > you can check what is this by running `ps > > > > > > > > > > > -ef|grep 517` > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > then you have options > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > kill this java process (or change the port it is > > > > > > > > > > > using) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > OR > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > change the KMS port > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Mon, 31 Aug 2020 at 03:28, dww < > > > > > > > > > > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > > Hello, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I am trying to install OpenMeetings 5.0.0 on a > > > > > > > > > > > > Linode VM that has Debian 10(Buster) using the > > > > > > > > > > > > tutorial for this OS from > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/display/OPENMEETINGS/Tutorials+for+installing+OpenMeetings+and+Tools > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > https://cwiki.apache.org/confluence/download/attachments/27838216/Installation%20OpenMeetings%205.0.0%20on%20Debian%2010.pdf?version=1&modificationDate=1598088626000&api=v2 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > At the step where the docker container for > > > > > > > > > > > > Kurento Media Server: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > docker run -d --name kms -p 8888:8888 --mount > > > > > > > > > > > > type=bind,source=/opt/open500/webapps/openmeeti > > > > > > > > > > > > ngs/data,target=/opt/open500/webapps/openmeetin > > > > > > > > > > > > gs/data kurento/kurento-media-server > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I get the following error: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 346acd541df9862de72d4cca2311ce901bfdb70362da3e8 > > > > > > > > > > > > 08a39b53f0fab64e0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > docker: Error response from daemon: driver > > > > > > > > > > > > failed programming external connectivity on > > > > > > > > > > > > endpoint kms > > > > > > > > > > > > (89ecf38e0f841be2906042aa9a47735caecbd4121b2e1e > > > > > > > > > > > > 797a06e10f6e96c554): Error starting userland > > > > > > > > > > > > proxy: listen tcp > > > > > > > > > > > > 0.0.0.0:8888: bind: address already in use. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > When I run:netstat -pnltu | grep -i "8888" > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > tcp6 0 0 > > > > > > > > > > > > :::8888 :::* > > > > > > > > > > > > LISTEN 517/java > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Any help on how I can resolve this would be > > > > > > > > > > > > appreciated. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Dennis > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
