Hi Ohad, My supervisors are running. But inside them, the workers are not working. That is what I think the issue is. Do you have the same issue?
Eranga Heshan *Undergraduate* Computer Science & Engineering University of Moratuwa Mobile: +94 71 138 2686 <%2B94%2071%20552%202087> Email: [email protected] <[email protected]> <https://www.facebook.com/erangaheshan> <https://twitter.com/erangaheshan> <https://www.linkedin.com/in/erangaheshan> On Tue, Nov 29, 2016 at 3:23 PM, Ohad Edelstein <[email protected]> wrote: > Hi, I am having the same problem on storm 1.0.1 > I would love if you can share the information again, > I also had the same problem that Eranga is having. > The problem he has is that the supervisor can’t start because of > configuration problem… > > From: Eranga Heshan <[email protected]> > Reply-To: "[email protected]" <[email protected]> > Date: Tuesday, 29 November 2016 at 11:00 > To: "[email protected]" <[email protected]> > Subject: Re: Schedule a Bolt/Spout to a Predefined Node > > Hi, > > Thanks for the info. I implemented a custom scheduler according to the > link you suggested. I changed "getAvailableWorkerSlots" in the original > code to "getAvailableSlots". However when I submit my topology it shows on > the Storm UI. But when I click on it and look for more information I see > nothing. All the tables are emplty. > > I am here attaching the inside view of my topology. Could you please look > into that and say what I might have done wrong? > > Thanks, > Regards, > > > > > Eranga Heshan > *Undergraduate* > Computer Science & Engineering > University of Moratuwa > Mobile: +94 71 138 2686 <%2B94%2071%20552%202087> > Email: [email protected] <[email protected]> > <https://www.facebook.com/erangaheshan> > <https://twitter.com/erangaheshan> > <https://www.linkedin.com/in/erangaheshan> > > On Mon, Nov 28, 2016 at 9:54 AM, anshu shukla <[email protected]> > wrote: > >> you have to use custom site aware scheduler for that . Or use ntp to sync >> clocks for all VMs . >> >> On Mon, Nov 28, 2016 at 9:49 AM, Eranga Heshan <[email protected]> >> wrote: >> >>> Hi all, >>> >>> I have a cluster of four nodes. There is a benchmark I need to run on >>> cluster. Hovever I need to run "input bolt" and "output bolt" on the same >>> node in order to calculate the latency properly. >>> >>> Is there a way that I could run both the bols on the same node? >>> >>> Thanks, >>> Regards, >>> >>> Eranga Heshan >>> *Undergraduate* >>> Computer Science & Engineering >>> University of Moratuwa >>> Mobile: +94 71 138 2686 <%2B94%2071%20552%202087> >>> Email: [email protected] <[email protected]> >>> <https://www.facebook.com/erangaheshan> >>> <https://twitter.com/erangaheshan> >>> <https://www.linkedin.com/in/erangaheshan> >>> >> >> >> >> -- >> Thanks & Regards, >> Anshu Shukla >> > >
