Ken, I'm glad to help! I tried to use the latest version of shiro (1.4.0) too, but ran into a some issues. I've posted a message to the shiro user group, and those guys are really good about getting back and resolving issues, so I think it's only a matter of time before that gets resolved.
I've started another small project, still on shiro 1.3.2, that demonstrates how to define a custom shiro "realm", where you can do authentication and authorization. It's really pretty easy to implement, so it shouldn't take too long to crank out and post up to GitHub. Todd Kofford tkoff...@ku.edu -----Original Message----- From: Ken McWilliams [mailto:ken.mcwilli...@gmail.com] Sent: Thursday, June 29, 2017 1:25 PM To: Struts Users Mailing List <user@struts.apache.org> Subject: Re: Integrate Apache Shiro with Struts2 Todd, thank you this was a huge help! I've followed what you did and added it into a demo project that isn't much more complicated than what you provided, just so I know how it all works. One of the things I found the hard way is if you move to Shiro 1.4 (the latest) it won't start... I would like to turn your project into an struts2/shiro integration guide (although the provided project is quite straight forward). I'm using JPA services to get my user credentials so a bit of a guide there wouldn't hurt, so next step is to figure out how to make that work with shiro. Regards, Ken On Mon, Jun 26, 2017 at 9:40 AM, Kofford, C. Todd <tkoff...@ku.edu> wrote: > OK, I've just uploaded a very simple struts2 - shiro example to github: > https://github.com/tkofford/struts2shiro. NOTE - this is a very simple > example that uses a default shiro.ini file for > authentication/authorization and struts interceptor for "injecting" the shiro > subject into the stack. > > I'll start building a more complicated example that uses spring to > inject the shiro parts, and reply back when that's done. > > Todd Kofford > University of Kansas > tkoff...@ku.edu > > -----Original Message----- > From: Ken McWilliams [mailto:ken.mcwilli...@gmail.com] > Sent: Thursday, June 22, 2017 11:10 AM > To: Struts Users Mailing List <user@struts.apache.org> > Subject: Re: Integrate Apache Shiro with Struts2 > > That would be awesome. From having looked around on the web there is > very little Struts2/Shiro content. Some examples would be a great help. > > On Thu, Jun 22, 2017 at 9:51 AM, Kofford, C. Todd <tkoff...@ku.edu> wrote: > > > We've been using strut2 and shiro for a long time (actually since > > the old jsecurity days). I'd be happy to contribute some trivial and > > more complex examples if needed. > > > > Todd Kofford > > University of Kansas > > tkoff...@ku.edu > > > > > > -----Original Message----- > > From: Lukasz Lenart [mailto:lukaszlen...@apache.org] > > Sent: Sunday, June 18, 2017 3:23 AM > > To: Struts Users Mailing List <user@struts.apache.org> > > Subject: Re: Integrate Apache Shiro with Struts2 > > > > 2017-06-17 19:08 GMT+02:00 Ken McWilliams <ken.mcwilli...@gmail.com>: > > > If not I hope to follow up with a solution. > > > > +1 and we can add it to our docs :) > > > > > > Regards > > -- > > Łukasz > > + 48 606 323 122 http://www.lenart.org.pl/ > > > > -------------------------------------------------------------------- > > - To unsubscribe, e-mail: user-unsubscr...@struts.apache.org > > For additional commands, e-mail: user-h...@struts.apache.org > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: user-unsubscr...@struts.apache.org > For additional commands, e-mail: user-h...@struts.apache.org > -- Sent from my C64 using a 300 baud modem
