Am 19.02.2014 08:45, schrieb Debbie Zhang: > Thanks Peter. The problem turns out that Ruta workbench can't handle spaces > in descriptor paths. I fixed the space problem and rebuilt the project. Now > it works.
Ah, of course. That problem was already detected. It is fixed in the current trunk and will be part of the upcoming release. Best, Peter > Regards, > > Debbie > > -----Original Message----- > From: Peter Klügl [mailto:[email protected]] > Sent: Wednesday, 19 February 2014 1:44 AM > To: [email protected] > Subject: Re: UIMA Ruta Workbench picks up an incorrect descriptor path > > Hi, > > this is probably caused by the absolute paths in the descriptor. Try to > clean the project twice (Menu->Project->Clean) in order to regenerate the > descriptors. > > In the next release, UIMA Ruta 2.2.0, this should never happen again. > > Best, > > Peter > > Am 18.02.2014 09:15, schrieb Debbie Zhang: >> Hi all, >> >> >> >> I am new to UIMA Ruta. I try to run the Main.ruta in the >> ExampleProject came with Ruta 2.1.0 source release using Eclipse 3.7 >> according to the instruction. It seems the Ruta workbench picks up an >> incorrect descriptor path. I tried to set new Arguments in the "Run >> Configurations" to replace the default value. However, it doesn't >> work. So I would like to know how to change the default descriptor path. >> >> >> >> Due to some restriction at work, The UIMA Ruta plugins were installed >> manually. >> >> >> >> Please help. Thank you. >> >> >> >> Regards, >> >> >> >> Debbie >> >> >> >>
