/etc/cgconfig.conf
group virt {
cpu {
cpu.shares=9216;
}
}
有编辑过这个文件吗
2013/4/24 wx_csky <[email protected]>
> 如果在kvm主机上启动是可以的：
> 执行了【cloud-setup-agent -m 192.168.6.37 -z 1 -p 1 -c 2 -g
> 1ab192de-5e6a-39e7-842a-7e56b9a03646 -a --pubNic=cloudbr0 --prvNic=cloudbr0
> --guestNic=cloudbr0】后 就死掉了
>
> [root@node1 ~]# service libvirtd status
> libvirtd is stopped
> [root@node1 ~]# service libvirtd start
> Starting libvirtd daemon: [ OK ]
> [root@node1 ~]# service libvirtd status
> libvirtd (pid 3336) is running...
> [root@node1 ~]# cloud-setup-agent -m 192.168.6.37 -z 1 -p 1 -c 2 -g
> 1ab192de-5e6a-39e7-842a-7e56b9a03646 -a --pubNic=cloudbr0 --prvNic=cloudbr0
> --guestNic=cloudbr0
> Starting to configure your system:
> Configure SElinux ... [OK]
> Configure Network ... [OK]
> Configure Libvirt ... [Failed]
> Configuration failed for service Libvirt
> Try to restore your system:
> Restore SElinux ... [OK]
> Restore Network ... [OK]
> Restore Libvirt ... [Failed]
> [root@node1 ~]# service libvirtd status
> libvirtd is stopped
> [root@node1 ~]#
>
>
> -----邮件原件-----
> 发件人: 马营 [mailto:[email protected]]
> 发送时间: 2013年4月24日 10:16
> 收件人: [email protected]
> 主题: Re: cloudstack添加kvm主机失败
>
> 你的libvirtd服务器能正常起来吗
>
>
> 2013/4/24 wx_csky <[email protected]>
>
> > 大家好，有问题需要大家帮忙看一下
> >
> >
> >
> > 我在cs4.0.1中添加KVM主机出错：
> >
> > 2013-04-24 09:05:39,496 DEBUG [utils.ssh.SSHCmdHelper]
> > (catalina-exec-3:null) Executing cmd: cloud-setup-agent -m 192.168.6.37
> -z
> > 1 -p 1 -c 2 -g 1ab192de-5e6a-39e7-842a-7e56b9a03646 -a --pubNic=cloudbr0
> > --prvNic=cloudbr0 --guestNic=cloudbr0
> >
> > 2013-04-24 09:05:46,201 DEBUG [utils.ssh.SSHCmdHelper]
> > (catalina-exec-3:null) cloud-setup-agent -m 192.168.6.37 -z 1 -p 1 -c 2
> -g
> > 1ab192de-5e6a-39e7-842a-7e56b9a03646 -a --pubNic=cloudbr0
> --prvNic=cloudbr0
> > --guestNic=cloudbr0 output:[Failed]
> >
> >
> >
> > 配置如下：
> >
> > 1.cloudstack是基本网络
> >
> > 2.kvm主机：centos6.4+kvm
> >
> > 3./etc/libvirt/libvirtd.conf配置：
> >
> > listen_tls = 0
> >
> > listen_tcp = 1
> >
> > tcp_port = 16059
> >
> > auth_tcp = "none"
> >
> > mdns_adv = 0
> >
> >
> >
> > 4. /etc/sysconfig/libvirtd
> >
> > LIBVIRTD_ARGS="--listen"
> >
> > 5.、/etc/cloud/agent/agent.properties
> >
> > host=192.168.6.37
> >
> >
> >
> > 6.网桥配置
> >
> > /etc/sysconfig/network-scripts/ifcfg-cloudbr0
> >
> > DEVICE=cloudbr0
> >
> > TYPE=Bridge
> >
> > BOOTPROTO=static
> >
> > BROADCAST=192.168.6.255
> >
> > IPADDR=192.168.6.240
> >
> > NETMASK=255.255.255.0
> >
> > NETWORK=192.168.6.0
> >
> > GATEWAY=192.168.6.254
> >
> > ONBOOT=yes
> >
> > /etc/sysconfig/network-scripts/ifcfg-eth0
> >
> > DEVICE="eth0"
> >
> > HWADDR="00:1E:67:3A:B0:4E"
> >
> > #NM_CONTROLLED="yes"
> >
> > ONBOOT="yes"
> >
> > BRIDGE=cloudbr0
> >
> >
> >
> > 在KVM主机上执行【cloud-setup-agent -m 192.168.6.37 -z 1 -p 1 -c 2 -g
> > 1ab192de-5e6a-39e7-842a-7e56b9a03646 -a --pubNic=cloudbr0
> --prvNic=cloudbr0
> > --guestNic=cloudbr0】出现如下错误：
> >
> >
> >
> > [root@node1 ~]# cloud-setup-agent -m 192.168.6.37 -z 1 -p 1 -c 2 -g
> > 1ab192de-5e6a-39e7-842a-7e56b9a03646 -a --pubNic=cloudbr0
> --prvNic=cloudbr0
> > --guestNic=cloudbr0
> >
> > Starting to configure your system:
> >
> > Configure SElinux ... [OK]
> >
> > Configure Network ... [OK]
> >
> > Configure Libvirt ... [Failed]
> >
> > Configuration failed for service Libvirt
> >
> > Try to restore your system:
> >
> > Restore SElinux ... [OK]
> >
> > Restore Network ... [OK]
> >
> > Restore Libvirt ... [Failed]
> >
> >
> >
> > 我不清楚问题出在哪里，有了解的麻烦告知一下，谢谢
> >
> >
>
>
