Zdravim,
viem ze k tomuto problemu je na google vela prispevkov. Pregooglil som vsetko
no a stale si neviem rady. Nedari sa mi spojazdnit SMB pre monitoring zakladnej
dosky.
Prekompiloval som jadro aj s potrebnymi parametrami (snad som nic nezabudol) a
FBSD 6.2 pri starte nacita:
nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0x4c00-0x4c3f,0x4c40-0x4c7f irq
20 at device 10.1 on pci0
smbus0: <System Management Bus> on nfsmb0
smb0: <SMBus generic I/O> on smbus0
nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0
smbus1: <System Management Bus> on nfsmb1
smb1: <SMBus generic I/O> on smbus1
Ani jeden s MB monitoring programov (lmmon,mbmon,healthd) vsak nedokaze so SMB
komunikovat. Ked tak s ISA,kde ale hadze dost bludne informacie o teplote a
otakach.
Lmmon vracia IOCTL: Device not configured
healthd Vracia: ioctl(SMB_READB): Device not configured
InitMBInfo: Device not configured
Dosku mam ASUS M2NBP-VM CSM s nvidia nforce 430
Nestretol sa uz niekto s niecim podobnym?Dakujem za kazde nakopnutie.
--
_______________________________________________
Get your free email from http://bsdmail.com
--
FreeBSD mailing list ([email protected])
http://www.freebsd.cz/listserv/listinfo/users-l
