On 2008-11-20 13:27 +0100, Jaroslav Votruba wrote: > na zalohovacim serveru budou 3x 1TB disky pro zalohovani a 1x 500DB pro > system a dalsi drobnosti. Problem je s temi TB disky . Jsou to WD > 10EADS. Doma je v serveru bez problemu pouzivam, ale tady mi nejdou > nastavit pres sysinstal (fdisk,label). Pri vstupu fdisku na tento disk > mi to zarve: > > WARNING: A geometry of 121601/255/63 for ad10 is incorrect. Using ??? > ???a more likely geometry. If this geometry is incorrect or you ??? > ???are unsure as to whether or not it's correct, please consult ??? > ???the Hardware Guide in the Documentation submenu or use the ??? > ???(G)eometry command to change it now. ??? > ??? ??? > ???Remember: you need to enter whatever your BIOS thinks the ??? > ???geometry is! For IDE, it's what you were told in the BIOS ??? > ???setup. For SCSI, it's the translation mode your controller is ??? > ???using. Do NOT use a ``physical geometry''.
Ak na tom budes pouzivat iba FreeBSD, tak mozes toto varovanie ignorovat. Uz sa to tu v konferencii preberalo. Mne to hlasilo skoro na kazdom disku, co som instaloval. > i presto se tabulka zapise > > ???Wrote FDISK partition information out successfully. > > spustim label > Disk: ad10 Partition name: ad10s1 Free: 1953523055 blocks (931GB) > > Part Mount Size Newfs Part Mount Size Newfs > ---- ----- ---- ----- ---- ----- ---- ----- > > pri zapisu labelu dojde k chybe, i kdyz adresar existuje > > Error mounting /dev/ad10s1d on /data/data-novell : No such file or > directory Asi neexistuje /dev/ad10s1d alebo /data/data-novell... niekde si asi spravil chybu. > namountil jsem jej do korenu, to neprotestovalo, nicmene kdyz se podivam > labelem znova, slice neni zapsana > Verze bsd je 7,0 amd64 . > > kde zjistim geometrii disku? V BIOSU nic videt neni , na strankach > vyrobce maji vse mozne, ale o geometrii jsem nanasel nic, na disku je > jen udaj LBA 1953525168 > > > 100MB slice mi to vytvorilo bez problemu, pri dalsim pokusu o slice pres > cely disk jsem dostal hlasku > ERROR: Unable to write data to disk ad10! ??? > ??? ??? > ???To edit the labels on a running system set ??? > ???sysctl kern.geom.debugflags=16 and try again. > > pote nasledovala hlaska pri zapisu > ???Error mounting /dev/ad10s1d on /data/data1 : Operation not permitted nie je mozne menit partition table za behu systemu, musis spravit to, co ti radi ta hlaska, teda ako root spustit: sysctl kern.geom.debugflags=16 > zmenil jsem mounpoint na korenovy adresar a probehlo to bez povidani, > nicmene df -h mi stale ukazuje , ze je stale namountovana ta 100Mb > slice, ktera je jiz davno odstranena. > Tak jsem z toho zmatenej JJ, niekde v tom robis zmetok. Marian -- FreeBSD mailing list ([email protected]) http://www.freebsd.cz/listserv/listinfo/users-l
