Miroslav Prýmek napsal/wrote, On 11/26/09 15:26:
1) RAID
Prvni problem je RAID radic - je tam (jako karta v PCI) IBM ServeRAID 4Lx (neo
lite),
ktery je sice rozpoznan spravne (vidim logicke disky), ale nevim,
jak s nim komunikovat (zjistit stav, nastavit typ RAIDu) - v BIOSu bohuzel
nejde nastavit typ RAIDu, jde
si jenom prohlidnout status, takze by to nutne chtelo nejakou utilitu.
Obavam se, ze pro FreeBSD management neni.
2) HW sensory
Na desce je jakejsi procesor, kterej by (myslim si) mel zpristupnovat sensory:
ses0 at ahc0 bus 0 target 8 lun 0
ses0: <IBM FTlV1 S2 0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
Existuje k tomu nejaky software v portech? Jedine, co jsem nasel, bylo
/usr/share/examples/ses/sesd,
ktery ale vypise jenom tohle:
[test2:/usr/share/examples/ses/sesd]# ./sesd -d /dev/ses0
sesd: /dev/ses0: Enclosure Status OK
Znamena to, ze ani data ze sensoru nijak z toho serveru nedostanu?
Tys od toho necetl manualovou stranku ?
----------------------
The user may then use getencstat to get more detailed information about
the state of the over enclosure device or objects within the enclosure
device.
----------------------
A rovnou radeji i citat z manualove stranky od getencstat:
----------------------------------
gets summary and detailed SCSI Environmental Services (or SAF-TE) device
enclosure status. The overall status is printed out.
If the overall status is considered okay, nothing else is printed out
(unless the -v option is used)
----------------------------------
Zkus to ...
Dan
--
FreeBSD mailing list ([email protected])
http://www.freebsd.cz/listserv/listinfo/users-l
