Zdravim,
objavil sa mi na jednom stroji zvlastny problem s IPMI management
modulom od IBM (BMC).
Ked je stroj vypnuty, management funguje, rovnako pocas bootovania
vsetko funguje jak ma.
Akonahle zacne bootovat FreeBSD 8.1 managemen interface prestane odpovedat.
64 bytes from 192.168.0.1: icmp_seq=125 ttl=128 time=45.0 ms
64 bytes from 192.168.0.1: icmp_seq=126 ttl=128 time=43.8 ms
>From 192.168.0.2: icmp_seq=156 Destination Host Unreachable
>From 192.168.0.2 icmp_seq=156 Destination Host Unreachable
Jadro je
FreeBSD devil.1art.intra 8.1-RELEASE FreeBSD 8.1-RELEASE #0: Mon Jul 19
02:36:49 UTC 2010
[email protected]:/usr/obj/usr/src/sys/GENERIC amd64
Prikladam vypis z dmesg.
Ked je system nabootovany tak sa na ipmi management da z BSD dostat, da
sa menit konfiguracia ale neodpoveda po sieti po svojom interface.
# kldload ipmi
# ipmitool lan print
Set in Progress : Set Complete
Auth Type Support : NONE MD2 MD5 PASSWORD
Auth Type Enable : Callback :
: User : MD2 MD5 PASSWORD
: Operator : MD2 MD5 PASSWORD
: Admin : MD2 MD5 PASSWORD
: OEM :
IP Address Source : Static Address
IP Address : 192.168.0.1
Subnet Mask : 255.255.255.0
MAC Address : 00:14:5e:33:ca:f9
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
Default Gateway IP : 0.0.0.0
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
Cipher Suite Priv Max : Not Available
Server je starsi IBM x336 s BMC ktory ma vlastny interface.
Netusite kde by mohol byt problem ?
--
Wiro
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010
[email protected]:/usr/obj/usr/src/sys/GENERIC amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.14-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Family = f Model = 4 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,CX16,xTPR>
AMD Features=0x20000800<SYSCALL,LM>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4110974976 (3920 MB)
ACPI APIC Table: <IBM SERONYXP>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP/HT): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP/HT): APIC ID: 7
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <IBM SERONYXP> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x588-0x58b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib3
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem
0xdeff0000-0xdeffffff,0xdefe0000-0xdefeffff irq 28 at device 1.0 on pci4
mpt0: [ITHREAD]
mpt0: MPI Version=1.2.15.0
mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
mpt0: 1 Active Volume (1 Max)
mpt0: 2 Hidden Drive Members (6 Max)
pcib4: <ACPI PCI-PCI bridge> at device 0.2 on pci3
pci5: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem
0xdcff0000-0xdcffffff irq 16 at device 0.0 on pci6
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:14:5e:33:40:9e
bge0: [ITHREAD]
pcib6: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci7: <ACPI PCI bus> on pcib6
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem
0xdaff0000-0xdaffffff irq 16 at device 0.0 on pci7
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: Ethernet address: 00:14:5e:33:40:9f
bge1: [ITHREAD]
pci0: <base peripheral> at device 8.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2200-0x221f irq 16 at
device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2600-0x261f irq 19 at
device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xf9000000-0xf90003ff
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
0xf0000000-0xf7ffffff,0xf8000000-0xf800ffff irq 16 at device 1.0 on pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x480-0x48f at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
p4tcc2: <CPU Frequency Thermal Control> on cpu2
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
mpt0:vol0(mpt0:0:0): Settings ( Hot-Plug-Spares )
mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
mpt0:vol0(mpt0:0:0): 2 Members:
(mpt0:1:0:0): Primary Online
(mpt0:1:1:0): Secondary Online
mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
mpt0:vol0(mpt0:0:0): Status ( Enabled )
(mpt0:vol0:0): Physical (mpt0:0:0:0), Pass-thru (mpt0:1:0:0)
(mpt0:vol0:0): Online
(mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:1:0)
(mpt0:vol0:1): Onlineugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
(xpt0:mpt0:1:-1:-1): rescan already queued
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4246N/0Y03> at ata0-master UDMA33 SATA
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
(probe0:mpt0:0:8:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:mpt0:0:8:0): CAM status: SCSI Status Error
(probe0:mpt0:0:8:0): SCSI status: Check Condition
(probe0:mpt0:0:8:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or
bus device reset occurred)
ses0 at mpt0 bus 0 scbus0 target 8 lun 0
ses0: <IBM 25P3495a S320 1 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
pass2 at mpt0 bus 1 scbus1 target 0 lun 0
pass2: <IBM-ESXS GNS073C3ESTT0ZFN JP85> Fixed Uninstalled SCSI-4 device
pass2: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
pass2: Command Queueing enabled
pass3 at mpt0 bus 1 scbus1 target 1 lun 0
pass3: <IBM-ESXS MAW3073NC FN C206> Fixed Uninstalled SCSI-4 device
pass3: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
pass3: Command Queueing enabled
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <LSILOGIC 1030 IM IM 1000> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 70001MB (143364060 512 byte sectors: 255H 63S/T 8924C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Trying to mount root from ufs:/dev/da0s1a
bge0: link state changed to UP
driver bug: Unable to set devclass (devname: (null))
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa
ipmi0: IPMI device rev. 0, firmware rev. 1.81, version 1.5
ipmi0: Number of channels 4
ipmi0: Attached watchdog
ppc0: cannot reserve I/O port range
--
FreeBSD mailing list ([email protected])
http://www.freebsd.cz/listserv/listinfo/users-l
