There is camel-exec to call executables such as .exe files. http://camel.apache.org/exec
You can also build your own components if you fancy On Wed, Mar 8, 2017 at 1:16 AM, David Hoffer <dhoff...@gmail.com> wrote: > The password does contain @ and # characters. However we are able to > connect with those no problem in our test enviornment, no need for the > RAW() function. Also it turns out the username contains a '.' character > but here too no problem in our test/dev environment. But in production > where we have no control over the remote server it fails to connect. Here > is a close approximation of the Debug stack trace. > > Failed delivery for (MesasgeId: ID-xxxxxx) using exchange (Message:bbb) > > Message exchange has failed so breaking out of pipeline for exchange: > Exchange [Message:bbb] Exception: > org.apache.camel.component.file.GenericFileOperationFailedException: cannot > connect to sftp://jms.sftp@ip > > Done processing file: GenericFile [E:\gangplank\work\filepathhere.txt] > > Renaming file: GenericFile [E:\filepath] to GenericFile [E:\filepathto > .error dir] > > Caused by: com.jcraft.jsch.JSchException: Auth Fail > > Caused by com.jcraft.jsch.Session.connect (Session.java: 512) > > Org.apache.camel.component.file.GenericFileOperationFailedException > > Org.apache.camel.component.file.remote.sftpOperations.connect > (sftpOperations.java: 146) > > > Also the production environment is locked down so that SSH is not > accessible for this user but SFTP is. However in production we did > temporarily allow SSH and that did not help and also in test/dev we > disabled SSH and Camel/JSCH can connect fine. > > So everything works as expected everywhere expect production where it > matters. But in production psftp.exe can connect fine. > > Does anyone have any ideas how to fix? > > Does Camel support any other SFTP clients other than JSCH? > > How about a Camel component that bridges to psftp.exe since that can > connect? > > -Dave > > On Mon, Mar 6, 2017 at 5:56 AM, finx <oieusouof...@gmail.com> wrote: > >> Yeah... I thought the same, until I got a password with special chars and I >> spent like two days investigating why the connection fails! >> >> Not sure if RAW() can be used for other parameters... I think that is >> possible, but I never tried. Only can be sure testing it. >> >> Good luck! >> >> Abraços, >> Luis Felipe - Finx >> >> On Mon, Mar 6, 2017 at 12:40 AM, David Hoffer <dhoff...@gmail.com> wrote: >> >> > Thanks for the tip I did not know about this. I would think Camel would >> > want to treat all passwords as raw...can never tolerate those changing. >> > Once we get back on site (Monday I think) we will give this a try...I >> hope >> > this fixes the connection with Camel. >> > >> > Btw, what if the username or folder had a special character? Can RAW() >> be >> > used for any parameter? >> > >> > -Dave >> > >> > On Sat, Mar 4, 2017 at 9:19 AM, finx <oieusouof...@gmail.com> wrote: >> > >> > > Hi Dave. >> > > >> > > Does the password have special characters? I faced a similar situation, >> > and >> > > the solution was to use the RAW function ( >> > > http://camel.apache.org/how-do-i-configure-password- >> > > options-on-camel-endpoints-without-the-value-being-encoded.html) >> > > in the password. >> > > >> > > Abraços, >> > > Luis Felipe - Finx >> > > >> > > On Fri, Mar 3, 2017 at 11:52 PM, David Hoffer <dhoff...@gmail.com> >> > wrote: >> > > >> > > > We are using password authentication >> > > > >> > > > We have log4j configured but aren't seeing any connection handshake >> log >> > > > messages with debug enabled but I'm not sure what JSCH (the actual >> > > > connection library) has for logging. >> > > > >> > > > Our situation is we have an SFTP server that we have no control over >> > that >> > > > is refusing to connect with Camel. However we can connect with fsftp >> > > > fine. SSH is disabled so cannot connect with putty. However when we >> > > setup >> > > > a similar linux server locally camel connects to it just fine. We >> are >> > > > trying to figure out why it fails for this one connection we have no >> > > > control or system information of (e.g. we can't get on the box that >> is >> > > > failing to accept our connection and check logs/etc). >> > > > >> > > > -Dave >> > > > >> > > > On Fri, Mar 3, 2017 at 5:41 PM, S AR <sa_remin...@hotmail.com> >> wrote: >> > > > >> > > > > What errors do you receive? >> > > > > >> > > > > Are you using password authentication or privateKey authentication? >> > > > > >> > > > > If you are using privateKey, Have you generated a private key file? >> > > > > >> > > > > Regarding logging, since camel uses log4j2, you can configure an >> > > appender >> > > > > for the classes in the package: org.apache.camel.component.file >> > > > > >> > > > > In log4j2, that means, you should have something like this: >> > > > > >> > > > > appender.mylogger.type = Console >> > > > > appender.mylogger.name = MYLOGGER >> > > > > appender.mylogger.layout.type = PatternLayout >> > > > > appender.mylogger.layout.pattern = %d %p %C{1.} [%t] %m%n >> > > > > >> > > > > logger.mylogger.name = org.apache.camel.component.file >> > > > > logger.mylogger.level = debug >> > > > > logger.mylogger.additivity = false >> > > > > logger.mylogger.appenderRef.mylogger.ref = MYLOGGER >> > > > > >> > > > > Regards. >> > > > > >> > > > > On 03.03.2017 18:16, David Hoffer wrote: >> > > > > >> > > > > Is there a way to turn on low level logging so we can see why Camel >> > is >> > > > > failing to connect? We can connect to the same server with >> puttyftp >> > > and >> > > > > put files but not with camel...and the errors are not very >> detailed. >> > > > > >> > > > > -Dave >> > > > > >> > > > > On Fri, Mar 3, 2017 at 9:54 AM, S AR <sa_remin...@hotmail.com>< >> > mailto: >> > > > > sa_remin...@hotmail.com> wrote: >> > > > > >> > > > > >> > > > > >> > > > > Hello David, >> > > > > >> > > > > When I work with camel-sftp, The first thing I do is to manually >> > > connect >> > > > > to the remote machine via ssh, so that my knownHosts >> > > > > (System.getProperty(user.home)/.ssh/known_hosts) file is written. >> On >> > > > > windows, I use cygwin for that. I assume you can do the same with >> > > putty. >> > > > > >> > > > > >> > > > > You specify the certificate file as an option, as described in the >> > > > > documentation: http://camel.apache.org/ftp2.html >> > > > > >> > > > > knownHostFile: path to your known_hosts >> > > > > >> > > > > privateKeyFile: path to your id_rsa >> > > > > >> > > > > >> > > > > privateKeyFilePassphrase: passphrase of you id_rsa >> > > > > >> > > > > >> > > > > Hope it gives you an idea about where to look at. >> > > > > >> > > > > >> > > > > Good luck. >> > > > > >> > > > > >> > > > > On 03.03.2017 17:32, David Hoffer wrote: >> > > > > >> > > > > How does Camel handle the SSH cert when connecting to SFTP servers? >> > > > > Somehow it has to accept the cert provided by the server how does >> it >> > do >> > > > > that? >> > > > > >> > > > > The docs say the default is: >> > > > > strictHostKeyChecking=no >> > > > > >> > > > > What does this mean? Does this mean it will accept every cert? >> > > > > >> > > > > What does strictHostKeyChecking=yes mean? >> > > > > >> > > > > Where does Camel store the cert that it accepted? Can we preempt >> > this >> > > > hole >> > > > > process by manually accepting the cert with a different tool, eg. >> > > > > puttyftp? In this case there would have to be a shared location >> for >> > > the >> > > > > cert...we are running camel on Windows so I think puttyftp stores >> the >> > > > cert >> > > > > in the registry. Where does Camel/JSCH look for certs? >> > > > > >> > > > > -Dave >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > >> > > >> > >> -- Claus Ibsen ----------------- http://davsclaus.com @davsclaus Camel in Action 2: https://www.manning.com/ibsen2
