Yes, this deployed with advanced configuration. Even , i checked the setup configuration and i found that guest traffic is enabled.
The problem that router DHCP discover available only within the hosts not all the cluster , so the other XenServers in the pool can't see anything from the router. So , is there any others configurations have to be done for XenServers Pool ? On Fri, Mar 22, 2013 at 7:05 PM, Ahmad Emneina <aemne...@gmail.com> wrote: > Is this using a basic or advanced zone. This is definitely NOT how it > should work :) > > VM's across a zone, within the same account, should be able to reach each > other... when deployed to the same network. > > > On Fri, Mar 22, 2013 at 10:53 AM, tawfiq zidi <tawfiq.z...@gmail.com> > wrote: > > > Hi, > > > > I've Created XenServer Cluster with two Host ( XS 6.0.2 ) , the system > VMs > > ( ssvm and cpvm ) and virtual router are created fine in the first host, > > and I've succeded to launch VMs in the first host. > > > > But when I tried to launch VMs in the second Host, the VMs always remains > > unreachable . > > I've checked the traffic connection and I found that the VMs in the > Second > > host can't reach the Virtual router in the First Host , because the VM > and > > Virtual Router are in seperate Link local network. So that why the VMs in > > the Second Host will not get an IP address after a DHCP discover from the > > Virtual Router. > > > > My question is : is it a normal behavior that within a cluster , a VM in > a > > Host B can't reach a virtual router in a Host A., did I miss some > > configuration in creating a pool of XenServer ? > > > > > > Best Regards. > > >
