Alex,
I was trying to do the same thing, and ended up having to downgrade the
OS to CentOS 6.3 to add a host to Cloudstack. I did notice when I was trying
to investigate that there is a JIRA ticket open to add CentOS 6.4 support for
installation at https://issues.apache.org/jira/browse/CLOUDSTACK-1642. From
the look of things it is not being added until future releases though. I also
had the same issue with following the network setup and no longer having
internet access, but was able to do a basic network installation just leaving
it as a flat network without configuring the vlans.
Hope this helps, David Ortiz
> Date: Thu, 11 Apr 2013 00:43:15 +0800
> From: a...@j2anywhere.com
> To: users@cloudstack.apache.org
> Subject: 4.0.1 Installation on CentOS 6.4 Questions
>
> I am currently looking at installating CS 4.0.1 onto a single system
> running CentOS 6.4.
>
> The installation of the management server was pretty straight forward,
> however using either the configuration wizard or the web based console I
> am not able to add a host to the server. Ideally I would like to run
> everything of a single system, which seems to be supported.
>
> Here is what I did so far:
>
> Completed the steps from the installation guide until steps 5.1 from
> which point I tried using the configuration wizard to complete the
> installation. This failed on the "Adding host" step. I then tried adding
> the host by-passing the configuration wizard, but that failed as well.
>
> Reading further in the manual in section 8 I came across the network
> configuration. Some of this seemed to have already been completed by the
> previous installation steps.
>
> After applying the network configuration I lost internet access and was
> still not able to add a hosts.
>
> Below is my configuration and the content of some of the log files I
> found. I have tried following the installation guide several times now,
> each time starting with a clean installation of CentOS, but always got
> stuck at this point.
>
> [root@panda ~]# for i in $(ls -1
> /etc/sysconfig/network-scripts/ifcfg-eth0*);do echo $i;cat $i;echo
> "=================================";done
> /etc/sysconfig/network-scripts/ifcfg-eth0
> DEVICE=eth0
> TYPE=Ethernet
> UUID=60452d20-04fd-480f-9d73-ed980e4ed223
> ONBOOT=yes
> NM_CONTROLLED=yes
> BOOTPROTO=dhcp
> HWADDR=50:E5:49:E1:7D:12
> DEFROUTE=yes
> PEERDNS=yes
> PEERROUTES=yes
> IPV4_FAILURE_FATAL=yes
> IPV6INIT=no
> NAME="System eth0"
> =================================
> /etc/sysconfig/network-scripts/ifcfg-eth0.100
> DEVICE=eth0.100
> ONBOOT=yes
> HOTPLUG=no
> BOOTPROTO=none
> TYPE=Ethernet
> VLAN=yes
> IPADDR=192.168.0.7
> GATEWAY=192.168.0.1
> NETMASK=255.255.0.0
> =================================
> /etc/sysconfig/network-scripts/ifcfg-eth0.200
> DEVICE=eth0.200
> ONBOOT=yes
> HOTPLUG=no
> BOOTPROTO=none
> TYPE=Ethernet
> VLAN=yes
> BRIDGE=cloudbr0
> =================================
> /etc/sysconfig/network-scripts/ifcfg-eth0.300
> DEVICE=eth0.300
> ONBOOT=yes
> HOTPLUG=no
> BOOTPROTO=none
> TYPE=Ethernet
> VLAN=yes
> BRIDGE=cloudbr1
> =================================
>
> cat /var/log/libvirt/libvirtd.log
> 2013-04-09 18:53:05.248+0000: 5764: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-09 18:53:05.248+0000: 5764: error :
> virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
> '/etc/pki/CA/cacert.pem': No such file or directory
> 2013-04-09 18:53:35.851+0000: 5800: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-09 18:53:35.851+0000: 5800: error :
> virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
> '/etc/pki/CA/cacert.pem': No such file or directory
> 2013-04-10 16:07:49.156+0000: 4018: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-10 16:07:49.156+0000: 4018: error :
> virStoragePoolDefParseXML:774 : XML error: missing pool source name element
>
> cat /var/log/libvirt/libvirtd.log
> 2013-04-09 18:53:05.248+0000: 5764: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-09 18:53:05.248+0000: 5764: error :
> virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
> '/etc/pki/CA/cacert.pem': No such file or directory
> 2013-04-09 18:53:35.851+0000: 5800: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-09 18:53:35.851+0000: 5800: error :
> virNetTLSContextCheckCertFile:113 : Cannot read CA certificate
> '/etc/pki/CA/cacert.pem': No such file or directory
> 2013-04-10 16:07:49.156+0000: 4018: info : libvirt version: 0.10.2,
> package: 18.el6_4.3 (CentOS BuildSystem <http://bugs.centos.org>,
> 2013-04-09-10:56:19, c6b8.bsys.dev.centos.org)
> 2013-04-10 16:07:49.156+0000: 4018: error :
> virStoragePoolDefParseXML:774 : XML error: missing pool source name element
> [root@panda ~]# cat /var/log/cloud/agent/agent.log
> 2013-04-11 00:07:33,936 INFO [utils.component.ComponentLocator]
> (main:null) Unable to find components.xml
> 2013-04-11 00:07:33,963 INFO [utils.component.ComponentLocator]
> (main:null) Skipping configuration using components.xml
> 2013-04-11 00:07:33,963 INFO [cloud.agent.AgentShell] (main:null)
> Implementation Version is 4.0.1.20130201075054
> 2013-04-11 00:07:33,964 INFO [cloud.agent.AgentShell] (main:null)
> agent.properties found at /etc/cloud/agent/agent.properties
> 2013-04-11 00:07:34,035 INFO [cloud.agent.AgentShell] (main:null)
> Defaulting to using properties file for storage
> 2013-04-11 00:07:34,037 INFO [cloud.agent.AgentShell] (main:null)
> Defaulting to the constant time backoff algorithm
> 2013-04-11 00:07:34,442 INFO [cloud.agent.Agent] (main:null) id is
> 2013-04-11 00:07:34,549 ERROR [cloud.resource.ServerResourceBase]
> (main:null) Nics are not configured!
> 2013-04-11 00:07:34,554 INFO [cloud.resource.ServerResourceBase]
> (main:null) Designating private to be nic eth0.100
> 2013-04-11 00:07:34,891 INFO
> [resource.virtualnetwork.VirtualRoutingResource] (main:null)
> VirtualRoutingResource _scriptDir to use: scripts/network/domr/kvm
> 2013-04-11 00:07:37,760 INFO [kvm.resource.LibvirtComputingResource]
> (main:null) No libvirt.vif.driver specififed. Defaults to BridgeVifDriver.
> 2013-04-11 00:07:38,244 INFO [cloud.agent.Agent] (main:null) Agent [id
> = new : type = LibvirtComputingResource : zone = default : pod = default
> : workers = 5 : host = localhost : port = 8250
> 2013-04-11 00:07:38,249 INFO [utils.nio.NioClient]
> (Agent-Selector:null) Connecting to localhost:8250
> 2013-04-11 00:07:38,316 ERROR [utils.nio.NioConnection]
> (Agent-Selector:null) Unable to connect to remote
> 2013-04-11 00:07:43,322 INFO [utils.nio.NioClient]
> (Agent-Selector:null) Connecting to localhost:8250
> 2013-04-11 00:07:43,323 ERROR [utils.nio.NioConnection]
> (Agent-Selector:null) Unable to connect to remote
> 2013-04-11 00:07:48,325 INFO [utils.nio.NioClient]
> (Agent-Selector:null) Connecting to localhost:8250
> 2013-04-11 00:07:48,947 INFO [utils.nio.NioClient]
> (Agent-Selector:null) SSL: Handshake done
> 2013-04-11 00:07:49,285 ERROR [kvm.storage.LibvirtStorageAdaptor]
> (Agent-Handler-1:null) org.libvirt.LibvirtException: XML error: missing
> pool source name element
> 2013-04-11 00:07:49,286 WARN [utils.nio.Task] (Agent-Handler-1:null)
> Caught the following exception but pushing on
> java.lang.NullPointerException
> at
> com.cloud.hypervisor.kvm.storage.LibvirtStorageAdaptor.createStoragePool(LibvirtStorageAdaptor.java:462)
> at
> com.cloud.hypervisor.kvm.storage.KVMStoragePoolManager.createStoragePool(KVMStoragePoolManager.java:57)
> at
> com.cloud.hypervisor.kvm.resource.LibvirtComputingResource.initialize(LibvirtComputingResource.java:3271)
> at com.cloud.agent.Agent.sendStartup(Agent.java:320)
> at com.cloud.agent.Agent$ServerHandler.doTask(Agent.java:850)
> at com.cloud.utils.nio.Task.run(Task.java:83)
> at
> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
> at java.lang.Thread.run(Thread.java:722)
>
> cat /var/log/cloud/management/catalina.out
> Apr 11, 2013 12:07:48 AM org.apache.coyote.http11.Http11NioProtocol start
> INFO: Starting Coyote HTTP/1.1 on http-8080
> Apr 11, 2013 12:07:48 AM org.apache.jk.common.ChannelSocket init
> INFO: JK: ajp13 listening on /0.0.0.0:20400
> Apr 11, 2013 12:07:48 AM org.apache.jk.server.JkMain start
> INFO: Jk running ID=0 time=0/37 config=null
> Apr 11, 2013 12:07:48 AM org.apache.catalina.core.StandardService start
> INFO: Starting service Catalina7080
> Apr 11, 2013 12:07:48 AM org.apache.catalina.core.StandardEngine start
> INFO: Starting Servlet Engine: Apache Tomcat/6.0.24
> Apr 11, 2013 12:07:48 AM org.apache.catalina.startup.HostConfig
> deployDirectory
> INFO: Deploying web application directory awsapi
> INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) We are
> good, no orphan management server msid in host table is found
> INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) Found 1
> inactive management server node based on timestamp
> INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:)
> management server node msid: 88945717247250, name:
> panda.home.j2anywhere.com, service ip: 192.168.0.6, version:
> 4.0.1.20130201075054
> INFO [cloud.cluster.ClusterManagerImpl] (Cluster-Heartbeat-1:) Trying
> to connect to 192.168.0.6
> Log4j configuration from : /usr/share/cloud/management/conf/log4j-cloud.xml
> Apr 11, 2013 12:07:50 AM org.apache.coyote.http11.Http11NioProtocol start
> INFO: Starting Coyote HTTP/1.1 on http-7080
> Apr 11, 2013 12:07:50 AM org.apache.catalina.startup.Catalina start
> INFO: Server startup in 14042 ms
> ERROR [cloud.alert.AlertManagerImpl] (Cluster-Notification-1:) Problem
> sending email alert
> java.lang.NullPointerException
> at
> com.cloud.alert.AlertManagerImpl$EmailAlert.sendAlert(AlertManagerImpl.java:776)
> at
> com.cloud.alert.AlertManagerImpl.sendAlert(AlertManagerImpl.java:268)
> at
> com.cloud.alert.ClusterAlertAdapter.onClusterNodeJoined(ClusterAlertAdapter.java:73)
> at
> com.cloud.alert.ClusterAlertAdapter.onClusterAlert(ClusterAlertAdapter.java:52)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
> at java.lang.reflect.Method.invoke(Method.java:601)
> at
> com.cloud.utils.events.SubscriptionMgr$SubscriberInfo.execute(SubscriptionMgr.java:147)
> at
> com.cloud.utils.events.SubscriptionMgr.notifySubscribers(SubscriptionMgr.java:77)
> at
> com.cloud.cluster.ClusterManagerImpl.notifyNodeJoined(ClusterManagerImpl.java:650)
> at
> com.cloud.cluster.ClusterManagerImpl$5.run(ClusterManagerImpl.java:871)
> at
> java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
> at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
> at java.util.concurrent.FutureTask.run(FutureTask.java:166)
> at
> java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
> at
> java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
> at java.lang.Thread.run(Thread.java:722)
> WARN [cloud.cluster.ClusterManagerImpl] (Cluster-Notification-1:)
> Notifying management server join event took 285 ms
> INFO [cloud.resource.ResourceManagerImpl] (catalina-exec-21:) Trying to
> add a new host at http://192.168.0.6 in data center 1
> INFO [utils.ssh.SSHCmdHelper] (catalina-exec-21:) Timeout while waiting
> for data from peer.
> INFO [utils.ssh.SSHCmdHelper] (catalina-exec-21:) Timeout while waiting
> for data from peer.
>
>
