Hello,
Sorry for the delay,
Here is the NAT table. Please check.
The xxx.105.191.147 IP is the public IP for the VRouter-VM.
root@r-6-VM:~# iptables -t nat -L -nv
Chain PREROUTING (policy ACCEPT 258 packets, 13822 bytes)
pkts bytes target prot opt in out source
destination
Chain POSTROUTING (policy ACCEPT 4 packets, 532 bytes)
pkts bytes target prot opt in out source
destination
0 0 SNAT all -- * eth3 0.0.0.0/0
0.0.0.0/0 to:xxx.105.191.147
0 0 SNAT all -- * eth4 0.0.0.0/0
0.0.0.0/0 to:xxx.105.191.147
Chain OUTPUT (policy ACCEPT 3 packets, 448 bytes)
pkts bytes target prot opt in out source
destination
root@r-6-VM:~#
Thanks a lot.
On Mon, May 27, 2013 at 1:09 PM, Jayapal Reddy Uradi <
jayapalreddy.ur...@citrix.com> wrote:
> From the packet captures on eth2, the vm IP seems to be not NATed.
> 13:39:41.991966 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879, seq 126, length 64
>
> Can you also share iptables -t nat -L -nv output.
>
> Thanks,
> Jayapal
>
> > -----Original Message-----
> > From: wq meng [mailto:wqm...@gmail.com]
> > Sent: Friday, 24 May 2013 7:13 PM
> > To: users@cloudstack.apache.org
> > Subject: Re: allow outbound access by default on virtual routers
> >
> > Hello Jayapal
> >
> >
> >
> >
> > I ping google.com on the Guest VM,
> >
> > Here is the dump data from the router - VM.
> >
> > Please review.
> >
> > And the 2.*.2 is public IP, which I replace to the real ip.
> >
> >
> > Thank you very much.
> >
> >
> >
> >
> > root@r-7-VM:~#
> > root@r-7-VM:~# tcpdump -i eth0 -nq
> > tcpdump: verbose output suppressed, use -v or -vv for full protocol
> decode
> > listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
> > 13:38:52.979198 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 77, length 64
> > 13:38:53.979203 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 78, length 64
> > 13:38:54.979205 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 79, length 64
> > 13:38:55.978182 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 80, length 64
> > 13:38:56.979188 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 81, length 64
> > 13:38:57.979299 ARP, Request who-has 10.1.1.1 tell 10.1.1.4, length 28
> > 13:38:57.979307 ARP, Reply 10.1.1.1 is-at 02:00:00:b1:00:05, length 28
> > 13:38:57.979315 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 82, length 64
> > 13:38:58.979250 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 83, length 64
> > 13:38:59.979297 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 84, length 64
> > 13:39:00.979313 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 85, length 64
> > 13:39:01.978311 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 86, length 64
> > 13:39:02.979282 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 87, length 64
> > 13:39:03.979323 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 88, length 64
> > 13:39:04.979315 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 89, length 64
> > 13:39:05.979364 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 90, length 64
> > 13:39:06.979420 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 91, length 64
> > 13:39:07.978421 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 92, length 64
> > 13:39:08.978432 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 93, length 64
> > 13:39:09.979447 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 94, length 64
> > 13:39:10.979437 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 95, length 64
> > 13:39:11.979474 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 96, length 64
> > 13:39:12.979473 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 97, length 64
> > 13:39:13.978525 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 98, length 64
> > 13:39:14.978535 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 99, length 64
> > 13:39:15.979562 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 100, length 64
> > 13:39:16.979575 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 101, length 64
> > 13:39:17.979602 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 102, length 64
> > 13:39:18.979584 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 103, length 64
> > 13:39:19.988541 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 104, length 64
> > 13:39:20.988615 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 105, length 64
> > 13:39:21.988598 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 106, length 64
> > 13:39:22.989582 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 107, length 64
> > 13:39:23.989666 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 108, length 64
> > 13:39:24.989695 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 109, length 64
> > 13:39:25.989725 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 110, length 64 ^C
> > 36 packets captured
> > 36 packets received by filter
> > 0 packets dropped by kernel
> > root@r-7-VM:~# tcpdump -i eth2 -nq
> > tcpdump: verbose output suppressed, use -v or -vv for full protocol
> decode
> > listening on eth2, link-type EN10MB (Ethernet), capture size 65535 bytes
> > 13:39:38.380208 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, length 42
> > 13:39:38.982570 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:38.987877 ARP, Request who-has 2.*.2.35 tell 2.*.2.1, length 42
> > 13:39:38.991937 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 123, length 64
> > 13:39:39.194709 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, length 42
> > 13:39:39.599296 ARP, Request who-has 2.*.2.35 tell 2.*.2.1, length 42
> > 13:39:39.904508 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, length 42
> > 13:39:39.991931 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 124, length 64
> > 13:39:40.417287 ARP, Request who-has 2.*.2.35 tell 2.*.2.1, length 42
> > 13:39:40.730305 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, length 42
> > 13:39:40.982552 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:40.991980 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 125, length 64
> > 13:39:41.337501 ARP, Request who-has 2.*.2.35 tell 2.*.2.1, length 42
> > 13:39:41.437224 ARP, Request who-has 2.*.2.22 tell 2.*.2.1, length 42
> > 13:39:41.991966 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 126, length 64
> > 13:39:42.903756 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, length 42
> > 13:39:42.982539 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:42.992996 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 127, length 64
> > 13:39:43.682772 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, length 42
> > 13:39:43.993009 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 128, length 64
> > 13:39:44.502714 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, length 42
> > 13:39:44.509679 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, length 42
> > 13:39:44.585413 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, length 42
> > 13:39:44.982554 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:44.993017 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 129, length 64
> > 13:39:45.160097 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, length 42
> > 13:39:45.215168 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, length 42
> > 13:39:45.318277 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, length 42
> > 13:39:45.325738 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, length 42
> > 13:39:45.421375 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, length 42
> > 13:39:45.826574 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, length 42
> > 13:39:45.928821 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, length 42
> > 13:39:45.930246 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, length 42
> > 13:39:45.993039 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 130, length 64
> > 13:39:46.030400 ARP, Request who-has 2.*.2.248 tell 2.*.2.1, length 42
> > 13:39:46.031609 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, length 42
> > 13:39:46.349636 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, length 42
> > 13:39:46.439927 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, length 42
> > 13:39:46.486265 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, length 42
> > 13:39:46.541822 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, length 42
> > 13:39:46.850884 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, length 42
> > 13:39:46.952230 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, length 42
> > 13:39:46.982553 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:46.993050 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 131, length 64
> > 13:39:47.051629 ARP, Request who-has 2.*.2.70 tell 2.*.2.1, length 42
> > 13:39:47.154197 ARP, Request who-has 2.*.2.228 tell 2.*.2.1, length 42
> > 13:39:47.155893 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, length 42
> > 13:39:47.258228 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, length 42
> > 13:39:47.459210 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, length 42
> > 13:39:47.561218 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, length 42
> > 13:39:47.970622 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, length 42
> > 13:39:47.971612 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, length 42
> > 13:39:47.993074 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 132, length 64
> > 13:39:48.380271 ARP, Request who-has 2.*.2.34 tell 2.*.2.1, length 42
> > 13:39:48.381173 ARP, Request who-has 2.*.2.53 tell 2.*.2.1, length 42
> > 13:39:48.581498 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, length 42
> > 13:39:48.890259 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, length 42
> > 13:39:48.982519 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:48.994081 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 133, length 64
> > 13:39:49.290934 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, length 42
> > 13:39:49.302649 ARP, Request who-has 2.*.2.32 tell 2.*.2.1, length 42
> > 13:39:49.433752 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, length 42
> > 13:39:49.812965 ARP, Request who-has 2.*.2.3 tell 2.*.2.1, length 42
> > 13:39:49.994099 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 134, length 64
> > 13:39:50.014695 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, length 42
> > 13:39:50.118276 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, length 42
> > 13:39:50.933507 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, length 42
> > 13:39:50.934227 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, length 42
> > 13:39:50.982526 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:50.994092 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 135, length 64
> > 13:39:51.643878 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, length 42
> > 13:39:51.848044 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, length 42
> > 13:39:51.994151 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 136, length 64
> > 13:39:52.452001 ARP, Request who-has 2.*.2.116 tell 2.*.2.1, length 42
> > 13:39:52.453417 ARP, Request who-has 2.*.2.42 tell 2.*.2.1, length 42
> > 13:39:52.982496 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:52.994150 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 137, length 64
> > 13:39:53.994171 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 138, length 64
> > 13:39:54.982573 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:54.994188 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 139, length 64
> > 13:39:55.995186 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 140, length 64
> > 13:39:56.982561 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:56.995215 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 141, length 64
> > 13:39:57.991661 ARP, Request who-has 2.*.2.1 tell 2.*.2.25, length 28
> > 13:39:57.992092 ARP, Reply 2.*.2.1 is-at 5c:5e:ab:da:b9:c0, length 42
> > 13:39:57.995220 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 142, length 64
> > 13:39:58.982566 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:39:58.995244 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 143, length 64
> > 13:39:59.995280 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 144, length 64
> > 13:40:00.417613 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, length 42
> > 13:40:00.982547 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:40:00.995274 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 145, length 64
> > 13:40:01.170853 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, length 42
> > 13:40:01.996303 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 146, length 64
> > 13:40:02.074725 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, length 42
> > 13:40:02.359140 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, length 42
> > 13:40:02.982500 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:40:02.985123 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, length 42
> > 13:40:02.996303 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 147, length 64
> > 13:40:03.186378 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, length 42
> > 13:40:03.417268 ARP, Request who-has 2.*.2.20 tell 2.*.2.1, length 42
> > 13:40:03.699414 ARP, Request who-has 2.*.2.4 tell 2.*.2.1, length 42
> > 13:40:03.996329 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 148, length 64
> > 13:40:03.998677 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, length 42
> > 13:40:04.301363 ARP, Request who-has 2.*.2.20 tell 2.*.2.1, length 42
> > 13:40:04.432828 ARP, Request who-has 2.*.2.115 tell 2.*.2.1, length 42
> > 13:40:04.435467 ARP, Request who-has 2.*.2.23 tell 2.*.2.1, length 42
> > 13:40:04.820262 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, length 42
> > 13:40:04.920378 ARP, Request who-has 2.*.2.20 tell 2.*.2.1, length 42
> > 13:40:04.982690 STP 802.1d, Config, Flags [none], bridge-id
> > 8000.00:25:90:a4:98:3e.8004, length 35
> > 13:40:04.996336 IP 10.1.1.4 > 74.125.224.228: ICMP echo request, id
> 56879,
> > seq 149, length 64
> > 13:40:05.124674 ARP, Request who-has 2.*.2.23 tell 2.*.2.1, length 42
> > 13:40:05.124678 ARP, Request who-has 2.*.2.115 tell 2.*.2.1, length 42
> > 13:40:05.399662 ARP, Request who-has 2.*.2.12 tell 2.*.2.1, length 42
> > 13:40:05.429940 ARP, Request who-has 2.*.2.161 tell 2.*.2.1, length 42 ^C
> > 115 packets captured
> > 115 packets received by filter
> > 0 packets dropped by kernel
> > root@r-7-VM:~#
> >
> >
> > On Fri, May 24, 2013 at 12:55 PM, Jayapal Reddy Uradi
> > <jayapalreddy.ur...@citrix.com> wrote:
> > > Iptables rules are looking fine.
> > > Can you please do the following.
> > > 1. ping google.com from vm
> > > 2. run the tcpdump command on the router eth0, eth2 and see the
> > packets are reaching to guest interface
> > > tcpdump -i eth0 -nq
> > > tcpdump -i eth2 -nq
> > >
> > > If guest vm icmp packets are not reaching to eth0 and eth2 then there
> is
> > issue in your network setup.
> > >
> > > Thanks,
> > > Jayapal
> > >
> > >
> > >> -----Original Message-----
> > >> From: wq meng [mailto:wqm...@gmail.com]
> > >> Sent: Friday, 24 May 2013 1:27 AM
> > >> To: users@cloudstack.apache.org
> > >> Subject: Re: allow outbound access by default on virtual routers
> > >>
> > >> Hello,
> > >>
> > >> Have you tried this and get this to work?
> > >>
> > >> I think I have the same problem just can not get the Guest VM to
> > >> access outbound by the V-router vm.
> > >>
> > >> my guest NIC is eth0, the public NIC is eth2.
> > >>
> > >> Here is the default rules in the Router VM. How to apply the rules
> > >> to get the Guest VM can access outbound?
> > >>
> > >> Could you help me to show how? I have tried many times, just no
> luck of
> > it.
> > >>
> > >> Thank you very much.
> > >>
> > >>
> > >> root@r-7-VM:~# cat /etc/iptables/rules
> > >>
> > >>
> > >> # Licensed to the Apache Software Foundation (ASF) under one # or
> > >> more contributor license agreements. See the NOTICE file #
> > >> distributed with this work for additional information # regarding
> > >> copyright ownership. The ASF licenses this file # to you under the
> > >> Apache License, Version 2.0 (the # "License"); you may not use this
> file
> > except in compliance # with the License.
> > >> You may obtain a copy of the License at #
> > >> # http://www.apache.org/licenses/LICENSE-2.0
> > >> #
> > >> # Unless required by applicable law or agreed to in writing, #
> > >> software distributed under the License is distributed on an # "AS IS"
> > >> BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY # KIND, either
> > express or implied.
> > >> See the License for the # specific language governing permissions and
> > >> limitations # under the License.
> > >>
> > >> *nat
> > >> :PREROUTING ACCEPT [0:0]
> > >> :POSTROUTING ACCEPT [0:0]
> > >> :OUTPUT ACCEPT [0:0]
> > >> COMMIT
> > >> *filter
> > >> :INPUT DROP [0:0]
> > >> :FORWARD DROP [0:0]
> > >> :OUTPUT ACCEPT [0:0]
> > >> -A INPUT -d 224.0.0.18/32 -j ACCEPT
> > >> -A INPUT -d 225.0.0.50/32 -j ACCEPT
> > >> -A INPUT -i eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT -A
> > >> INPUT -i
> > >> eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i eth2
> > >> -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j
> > >> ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p udp -m udp
> > >> --dport 67 -j ACCEPT -A INPUT -i eth0 -p udp -m udp --dport 53 -j
> > >> ACCEPT -A INPUT -i eth1 -p tcp -m state --state NEW --dport 3922 -j
> > >> ACCEPT -A INPUT -i eth0 -p tcp -m state -- state NEW --dport 8080 -j
> > >> ACCEPT -A INPUT -i eth0 -p tcp -m state --state NEW --dport 80 -j
> > >> ACCEPT -A FORWARD -i eth0 -o eth1 -m state --state
> > >> RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i eth0 -o eth2 -j ACCEPT -A
> > >> FORWARD -i eth2 -o eth0 -m state --state RELATED,ESTABLISHED -j
> > >> ACCEPT -A FORWARD -i eth0 -o eth0 -m state --state NEW -j ACCEPT -A
> > >> FORWARD -i
> > >> eth0 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT COMMIT
> > >> *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD
> > ACCEPT
> > >> [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING
> > -m
> > >> state --state ESTABLISHED,RELATED -j CONNMARK -- restore-mark -A
> > >> POSTROUTING -p udp --dport bootpc -j CHECKSUM -- checksum-fill
> > COMMIT
> > >>
> > >>
> > >> root@r-7-VM:~# ifconfig
> > >>
> > >>
> > >> On Mon, May 20, 2013 at 5:29 PM, Jayapal Reddy Uradi
> > >> <jayapalreddy.ur...@citrix.com> wrote:
> > >> >
> > >> > Currently we don't have the configurable option.
> > >> >
> > >> > 1. You can add egress rule on network with protocol 'all' to allow
> > >> > all
> > >> outbound traffic once the network is created.
> > >> >
> > >> > 2. If you want to allow traffic by default when ever router is
> > >> > created One work around will be add the below line into the
> > >> > iptables-router file
> > >> after the this line -I FW_OUTBOUND -m state --state
> > RELATED,ESTABLISHED
> > >> -j ACCEPT
> > >> >
> > >> > -A FW_OUTBOUND -j ACCEPT
> > >> >
> > >> >
> > >> > Thanks,
> > >> > Jayapal
> > >> >
> > >> >
> > >> > On 20-May-2013, at 2:18 PM, Len Bellemore
> > >> <len.bellem...@controlcircle.com> wrote:
> > >> >
> > >> >> Hi Guys
> > >> >>
> > >> >> Anyone know if it's possible to change some of the default options
> > >> >> on a
> > >> virtual router, so that every time it gets created it has particular
> rules?
> > >> >>
> > >> >> My main issue is that I want to allow outbound access by default
> > >> >> to every
> > >> account.
> > >> >>
> > >> >> Thanks
> > >> >> Len
> > >> >>
> > >> >
>
