Also, since 4.2 is still stabilizing, try out 4.1.1 first. On 8/7/13 1:19 PM, "Ron Wheeler" <[email protected]> wrote:
>Do you have any error messages in the log files that you can share? > >Ron > >On 07/08/2013 3:37 PM, Sarath Chandra wrote: >> Hi All, >> >> Thanks for your inputs. I have tried with the suggested changes but >>could >> not get it working. I started from scratch again to see if it helps. >>But I >> seem to be going wrong in some place. >> >> Can some one kinldy go though the below setup and tell me if its right. >>I >> am stuck since a week trying to get this running :( >> >> I have the following setup: >> >> Cloudstack Management Server >> >> Port 20 of Switch (Trunk all + with necessary Vlans) >> >> Hypervisor (Ubuntu + KVM) >> >> Port 22 of Switch (Trunk all + with necessary Vlans) >> >> >> I am thinking of having the following networks/sub-networks: >> mgmt/public/private/storage - 172.16.10.0/24 network >> >> Mangement >> >> Server - 172.16.10.1, Hypervisor 172.16.10.10 >> >> Public >> >> 172.16.10.20 - 172.16.10.30 >> >> Private (System VMs e.t.c) >> >> 172.16.10.31 - 172.16.10.200 >> >> Guest >> >> 10.1.1.0/24 >> >> >> *Server Side Configuration* >> >> CloudStack Server: >> >> eth0 >> >> Corporate lab ip (lets say 1.1.1.1) >> >> eth1.3100 >> >> Subinterface of Eth1 with Vlan 3100, IP: 172.16.10.1 >> >> >> *Global settings* >> >> system.vm.use.local.storage = true >> >> >> *Zone Creation Wizard for Advanced Network >> * >> >> Name : Zone-1** >> >> DNS1 : 8.8.8.8 >> >> Internal DNS1 : 8.8.8.8 >> >> Hypervisor : KVM >> >> Guest CIDR = 10.1.1.0/24 >> >> Local Storage enabled = true >> >> >> *Network Setup* >> >> Physical Network 1 : Isolation Method Vlan >> >> mgmt -- ???????? gave cloudbr0 (on the hypervisor, I have eth1.3100 >> assigned with IP 172.16.10.10 for mgmt traffic, cant add a bridge to it) >> >> public -- cloudbr0 >> >> guest -- cloudbr1 >> >> >> *Public IP range >> * >> >> GW : 172.16.10.1/24 (ip of the CS server) >> >> Vlan : 3200 (Public traffic Vlan) >> >> IP range : 172.16.10.20 - 172.16.10.30 >> >> >> *POD* >> >> GW : 172.16.10.1/24 (ip of the CS server) >> >> IP Range (Private n/w) : 172.16.10.31 - 172.16.10.200 >> >> >> *Guest* >> >> - Skipped Vlan range for guest traffic >> >> *Cluster* >> Name : Cluster-1 >> Hypervisor : KVM >> >> *Host* >> Name : Corporate Lab IP for Host (lets say 2.2.2.2) >> username & password >> >> *Primary Storage* : Gets skipped as I have selected local storage to >>true. >> >> *Secondary Storage* >> Provider : NFS >> Name : SecondaryStorage-1 >> NFS Server : CS Server Corporate ip (1.1.1.1) >> path : /mnt/secondary >> >> *Hypervisor (Ubuntu 13.04 + KVM)* >> >> eth0 >> >> Corporate Lab ip (2.2.2.2) >> >> eth1.3100 >> >> 172.16.10.10 GW: 172.16.10.1 >> >> eth1.3200 >> >> Added to bridge Cloudbr0 >> >> eth1.3300 >> >> Added to bridge Cloudbr1 >> >> >> >> >> >> Agent is setup properly and is able to communicate with the server. >> >> *Is this configuration correct or am I missing something??* >> >> I have seeded the SystemVM with the proper 4.2 templates as per >>Prasanna's >> suggestion today. My Setup due to some reason is not able to start the >> console proxy & SSVMs. >> >> >> Thanks in advance for your suggestions. >> >> >> regards, >> >> Sarath >> > > >-- >Ron Wheeler >President >Artifact Software Inc >email: [email protected] >skype: ronaldmwheeler >phone: 866-970-2435, ext 102 >
