I found solution. For basic installation I don't need to setup VLANs and two bridges. Now I have such network configuration:
DEVICE=cloudbr0 HWADDR=F0:DE:F1:A0:0E:D4 TYPE=Bridge ONBOOT=yes BOOTPROTO=none IPADDR=192.168.0.115 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 DNS1=8.8.8.8 IPV6INIT=no IPV6_AUTOCONF=no DELAY=0 STP=yes DEVICE=eth0 HWADDR=F0:DE:F1:A0:0E:D4 ONBOOT=yes BOOTPROTO=none TYPE=Ethernet #IPADDR=192.168.0.115 #NETMASK=255.255.255.0 #GATEWAY=192.168.0.1 #DNS1=8.8.8.8 BRIDGE=cloudbr0 2013/8/17 Ron Wheeler <rwhee...@artifact-software.com> > The docs are wrong. > There are quite a few people in your situation including myself. > I was able to put my project on hold until the docs are fixed but others > have plowed through and got it working. > > If you figure out where the docs led you astray, please write a bug report. > > Ron > > > > On 16/08/2013 6:07 PM, Vadim Bartko wrote: > >> Hi all, >> >> I am trying to install CloudStack in basic configuration. I've spent >> almoust one week, but still can't setup it. >> >> My environment is: >> >> one machine (my laptop with eth card) >> network - cable attached to router (dlink) >> CenOS 6.4 x64 >> Cloustack 4.1.1 (installed from official repo) >> >> >> Configuration: >> eth0 IP - 192.168.0.115 >> IP of router - 192.168.0.1 >> zone: >> dns 1: 8.8.8.8 >> internal dns 1: 8.8.8.8 >> >> pod: >> gateway: 192.168.0.1 >> netmask: 255.255.255.0 >> ip range: 192.168.0.50 - 192.168.0.60 >> >> guest network: >> gateway: 192.168.0.1 >> netmask: 255.255.255.0 >> ip range: 192.168.0.150 - 192.168.0.160 >> >> cluster: >> kvm >> >> host: >> host name: 192.168.0.115 >> user: root >> password: qwerty >> >> primary storage: >> server: 192.168.0.115 >> path: /export/primary >> >> secondary storage: >> server: 192.168.0.115 >> path: /export/secondary >> >> According to CloudStack panel, SSVM have next params: >> >> Public IP Address192.168.0.150Private IP Address192.168.0.57Link Local IP >> Adddress169.254.3.**45Hostlocalhost.**localdomainGateway192.168.0.1 >> But according to router ui, there is no machine with 192.168.0.150 or >> 192.168.0.57 address. >> >> in top output I see two kvm processes. I can login on proxy and SS VMs >> using ip like 169.254.3.* . >> Also, I can ping only proxy machine from SS and vice versa. Any other >> destination (including public ip addresses and address of real machine) is >> unavaliable. >> >> network configs (copied from deployment script): >> >> eth0_body=""" >> DEVICE=eth0 >> HWADDR=F0:DE:F1:A0:0E:D4 >> ONBOOT=yes >> HOTPLUG=no >> BOOTPROTO=none >> TYPE=Ethernet >> """ >> eth0_100_body=""" >> DEVICE=eth0.100 >> HWADDR=F0:DE:F1:A0:0E:D4 >> ONBOOT=yes >> HOTPLUG=no >> BOOTPROTO=none >> TYPE=Ethernet >> VLAN=yes >> IPADDR=192.168.0.120 >> GATEWAY=192.168.0.1 >> NETMASK=255.255.255.0 >> """ >> eth0_200_body=""" >> DEVICE=eth0.200 >> HWADDR=F0:DE:F1:A0:0E:D4 >> ONBOOT=yes >> HOTPLUG=no >> BOOTPROTO=none >> TYPE=Ethernet >> VLAN=yes >> BRIDGE=cloudbr0 >> """ >> >> eth0_300_body=""" >> DEVICE=eth0.300 >> HWADDR=F0:DE:F1:A0:0E:D4 >> ONBOOT=yes >> HOTPLUG=no >> BOOTPROTO=none >> TYPE=Ethernet >> VLAN=yes >> BRIDGE=cloudbr1 >> """ >> >> cloudbr0_body=""" >> DEVICE=cloudbr0 >> TYPE=Bridge >> ONBOOT=yes >> BOOTPROTO=none >> IPV6INIT=no >> IPV6_AUTOCONF=no >> DELAY=5 >> STP=yes >> """ >> >> cloudbr1_body=""" >> DEVICE=cloudbr1 >> TYPE=Bridge >> ONBOOT=yes >> BOOTPROTO=none >> IPV6INIT=no >> IPV6_AUTOCONF=no >> DELAY=5 >> STP=yes >> """ >> >> >> >> > > -- > Ron Wheeler > President > Artifact Software Inc > email: rwhee...@artifact-software.com > skype: ronaldmwheeler > phone: 866-970-2435, ext 102 > > -- Best regards, Vadim Bartko skype: hudvin email: hud...@gmail.com mobile: +380994334484
