what do you mean with "manage the agents in office lab"?
2013/9/29 Karan . <digitalka...@gmail.com> > Thanks Rafael this is one possible solution. But this is the complete > scenario I am facing. > When I am at my office I use my laptop(which has MS and agent on it) to > manage the agents in office lab. Now I want that when I am back at home I > can still start the MS on my laptop and tinker around with cloudstack but > this time I am not connected to any network . > > The solution I can see here is that when I am at office I should set host > in cloud.configuration to 192.168.1.4 and at home I should set it to > 127.0.0.1 . right? > > > Regards > > Karan > > > On Mon, Sep 30, 2013 at 1:52 AM, Karan . <digitalka...@gmail.com> wrote: > > > 192.168.1.4 is my CS server ip and yes I can ping it. Currently, I have > > only one machine in my setup and I have assigned this ip to it and I am > > running MS as well as agent over it. > > I would like to know how I can run CLOUDSTACK in a single node setup > > without being connected to any network and gateways. > > > > > > > > > > > > On Mon, Sep 30, 2013 at 1:40 AM, Rafael Weingartner < > > rafaelweingart...@gmail.com> wrote: > > > >> better, what is the CS server ip address? > >> > >> > >> 2013/9/29 Rafael Weingartner <rafaelweingart...@gmail.com> > >> > >> > from the server that CS is running can you ping this address: > >> 192.168.1.4? > >> > > >> > > >> > 2013/9/29 Karan . <digitalka...@gmail.com> > >> > > >> > Hi Marty, > >> >> > >> >> Interface already has static ip assigned to it. In fact, this is how > >> >> cloudstack has configured my /etc/network/interfaces > >> >> > >> >> auto lo > >> >> iface lo inet loopback > >> >> > >> >> auto eth0 > >> >> iface eth0 inet manual > >> >> > >> >> auto cloudbr0 > >> >> iface cloudbr0 inet static > >> >> bridge_ports eth0 > >> >> address 192.168.1.4 > >> >> netmask 255.255.255.0 > >> >> gateway 192.168.1.1 > >> >> > >> >> And this is the output for 'ip link ' > >> >> > >> >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > >> mode > >> >> DEFAULT > >> >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > >> >> 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc > pfifo_fast > >> >> master cloudbr0 state DOWN mode DEFAULT qlen 1000 > >> >> link/ether 28:92:4a:1e:f1:37 brd ff:ff:ff:ff:ff:ff > >> >> 3: cloudbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc > noqueue > >> >> state DOWN mode DEFAULT > >> >> link/ether 28:92:4a:1e:f1:37 brd ff:ff:ff:ff:ff:ff > >> >> > >> >> And 'ip address' > >> >> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN > >> >> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > >> >> inet 127.0.0.1/8 scope host lo > >> >> inet6 ::1/128 scope host > >> >> valid_lft forever preferred_lft forever > >> >> 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc > pfifo_fast > >> >> master cloudbr0 state DOWN qlen 1000 > >> >> link/ether 28:92:4a:1e:f1:37 brd ff:ff:ff:ff:ff:ff > >> >> 3: cloudbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc > noqueue > >> >> state DOWN > >> >> link/ether 28:92:4a:1e:f1:37 brd ff:ff:ff:ff:ff:ff > >> >> inet 192.168.1.4/24 brd 192.168.1.255 scope global cloudbr0 > >> >> > >> >> > >> >> > >> >> Regards > >> >> Karan Pugla > >> >> > >> >> > >> >> On Mon, Sep 30, 2013 at 1:23 AM, Marty Sweet <msweet....@gmail.com> > >> >> wrote: > >> >> > >> >> > Hi Karan, > >> >> > > >> >> > Try assigning a static address to the interface then bring it up > >> using > >> >> > ifup. This should in theory not close down the IP address once link > >> has > >> >> > been lost. > >> >> > > >> >> > Hope this helps, > >> >> > Marty > >> >> > > >> >> > > >> >> > On Sun, Sep 29, 2013 at 7:41 PM, Karan . <digitalka...@gmail.com> > >> >> wrote: > >> >> > > >> >> > > Hi > >> >> > > > >> >> > > I'll be giving a short demo on CLOUDSTACK in my organization and > >> for > >> >> > this > >> >> > > I have a very basic setup of Cloudstack 4.1.1 where I am using > >> one > >> >> > laptop > >> >> > > as management server as well as agent . Also, I am using basic > >> >> > networking. > >> >> > > From logs I have observed that whenever my network cable is > >> >> unplugged, MS > >> >> > > doesn't start and throws following exception: > >> >> > > > >> >> > > 2013-09-29 23:09:09,693 INFO [cloud.cluster.ClusterManagerImpl] > >> >> > > (Timer-1:null) Start configuring cluster manager : > >> >> > > ClusterManagerImpl_EnhancerByCloudStack_d07fda90 > >> >> > > 2013-09-29 23:09:09,753 INFO [cloud.cluster.ClusterManagerImpl] > >> >> > > (Timer-1:null) Cluster node IP : 192.168.1.4 > >> >> > > 2013-09-29 23:09:09,756 ERROR [utils.component.ComponentContext] > >> >> > > (Timer-1:null) Unhandled exception > >> >> > > javax.naming.ConfigurationException: cluster node IP should be > >> valid > >> >> > local > >> >> > > address where the server is running, please check your > >> configuration > >> >> > > at > >> >> > > > >> >> > > > >> >> > > >> >> > >> > com.cloud.cluster.ClusterManagerImpl.configure(ClusterManagerImpl.java:1319) > >> >> > > at > >> >> > > > >> >> > > > >> >> > > >> >> > >> > com.cloud.utils.component.ComponentContext.initComponentsLifeCycle(ComponentContext.java:111) > >> >> > > at > >> >> > > > >> >> > >> com.cloud.servlet.CloudStartupServlet$1.run(CloudStartupServlet.java:50) > >> >> > > at java.util.TimerThread.mainLoop(Timer.java:555) > >> >> > > at java.util.TimerThread.run(Timer.java:505) > >> >> > > > >> >> > > Just for starting MS I have to attach my laptop to a network. > >> Please > >> >> > > suggest me a way where I can start MS without being connected to > >> any > >> >> > > network since I have a single host setup. I have tried bringing > my > >> >> > > interface up using 'ip link set eth0 up' but eth0 status is > always > >> >> DOWN > >> >> > > unless I plug it into a network. > >> >> > > > >> >> > > > >> >> > > Regards > >> >> > > Karan Pugla > >> >> > > > >> >> > > >> >> > >> > > >> > > >> > > >> > -- > >> > Rafael Weingartner > >> > > >> > >> > >> > >> -- > >> Rafael Weingartner > >> > > > > > -- Rafael Weingartner
