A quick glance and I'm seeing your ifcfg-eth1 is referencing Bridge=Cloudbr1 and that need to be BRIDGE=cloudbr1.
Not sure if that's totally your problem, but it would keep your eth1 interface from coming up. As for the rest, I'm not sure. Travis On Oct 8, 2013, at 8:58 PM, motty cruz <motty.c...@gmail.com> wrote: > Hello, > I'm having issues configuring VLAN and network Bridge for CS 4.2. I'm using > CentOS > > am I missing something? > > [root@kvm4 network-scripts]# less ifcfg-eth0 > DEVICE=eth0 > HWADDR=00:1A:64:20:0D:20 > ONBOOT=yes > NM_CONTROLLED=yes > BOOTPROTO=none > TYPE=Ethernet > BRIDGE=cloudbr0 > > > [root@kvm4 network-scripts]# less ifcfg-cloudbr0 > DEVICE=cloudbr0 > TYPE=Bridge > ONBOOT=yes > BOOTPROTO=static > DNS1=8.8.8.8 > GATEWAY=192.168.0.1 > IPADDR=192.168.0.10 > NETMASK=255.255.255.0 > IPV6INIT=no > IPV6_AUTOCONF=no > DELAY=5 > STP=yes > > [root@kvm4 network-scripts]# less ifcfg-eth1 > DEVICE=eth1 > HWADDR=00:1A:64:20:00:D2 > ONBOOT=yes > HOTPLUG=no > BOOTPROTO=none > TYPE=Ethernet > Bridge=Cloudbr1 > > [root@kvm4 network-scripts]# less ifcfg-eth1.1 > DEVICE=eth0.1 > HWADDR=00:1A:64:20:D0:02 > ONBOOT=yes > HOTPLUG=no > BOOTPROTO=none > TYPE=Ethernet > VLAN=yes > > [root@kvm4 network-scripts]# less ifcfg-eth1.99 > DEVICE=eth0.1 > HWADDR=00:1A:64:20:DD:2D > ONBOOT=yes > HOTPLUG=no > BOOTPROTO=none > TYPE=Ethernet > VLAN=yes > > > [root@kvm4 network-scripts]# less ifcfg-cloudbr1 > DEVICE=cloudbr1 > TYPE=Bridge > ONBOOT=yes > BOOTPROTO=static > IPV6INIT=no > IPV6_AUTOCONF=no > DELAY=5 > STP=yes > > Thanks in advance,
