One more thing. If I try now to put the host in Maintenance mode, it stays in PrepareforMaintenance. If I cancel the Maintenance mode it becomes again Enabled.
On Wed, Oct 30, 2013 at 8:00 PM, Daniel Hertanu <[email protected]> wrote: > Hi > > CS 4.2.0 running on CentOS 6.4 64 bit with one XenServer host. I had to > reboot the host so I put the host in maintenance mode. All VMs were > shutdown, then the host was put in Maintenace, then I rebooted the host. > After the reboot both SSVM and CPVM fail to start with something like this: > > nameLabel: Async.VM.start_on > nameDescription: > allowedOperations: [] > currentOperations: {} > created: Wed Oct 30 17:55:26 GMT 2013 > finished: Wed Oct 30 17:55:35 GMT 2013 > status: failure > residentOn: com.xensource.xenapi.Host@59ca3c2e > progress: 1.0 > type: <none/> > result: > errorInfo: [CANNOT_PLUG_VIF, > OpaqueRef:ce19a694-e572-7620-b1bd-c5a5133f6861] > otherConfig: {} > subtaskOf: com.xensource.xenapi.Task@aaf13f6f > subtasks: [] > > > Peeking with XenCenter on the host events log I can see this: "This VM > cannot be started, as its network interfaces could not be connected. One of > the NICs is in use elsewhere." > > In the networking tab the host shows a NIC0 labeled management, a bond > between NIC1 and NIC2 labeled guest, NIC3 labeled storage and a > cloud_link_local_network. > > > Any idea on what's going on? > > Thanks, > > Daniel >
