Thanks Carlos I have read these but a little unsure of the specific order of deployment configuration if using xenserver. I was intending to setup KVM hosts, but after spending about 6 weeks trying to get Openstack deployed, I want to be 100% sure how to deploy C;loudstack before I pull the plug on Openstack - which has turned out to be a nightmare to deploy.
As mentioned in my replay to Dean, I am looking for corrext steps to deploy Cloudstack with xenserver, so any pointers outside of the ionline documentation would be appreciated. regards Ian Regards Ian On 23 June 2014 17:15, Carlos Reátegui <create...@gmail.com> wrote: > Hi Ian, > I used XenCenter to setup my network on the first host and then added the > others to the cluster within XenCenter. When you add the primary host to > CloudStack all hosts will get added. > > If you follow the install instructions on the site ( > http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/latest/) > you should be ok. > > I think the main thing that usually trips up folks is the vhd-util step. > Make sure that the one you download per the instructions ends up on the > hosts in the /opt/xensource/bin directory. In the past there were problems > with the script that added the hosts not copying it from the management > server. Please note that this vhd-util is a different version than the one > that comes with XenServer and you should leave that one alone. > > cheers, > -Carlos > > On Jun 23, 2014, at 8:45 AM, Dean Kamali <dean.kam...@gmail.com> wrote: > > > You could export shares via NFS and add your shares as primary or > > secondary storage to your CS accordingly, you may export your shares > > via ISCSI volumes as well. > > > > There is not specific guide for Dell EQLX. > > > > cheers > > > > Dean > > > > > > > > On Mon, Jun 23, 2014 at 3:01 AM, Ian Marshall <i...@itlhosting.co.uk> > wrote: > > > >> Hi Everyone > >> > >> Does anyone have a guide to help a new user setup a cloudstack with > >> xenserver and equallogic SAN? > >> > >> I've read the guides on the cloudstack site and found a link to the Dell > >> guide for integrating EQLX to xenserver but unsure if this is correct > for > >> cloudstack setup. Also not sure what should/can be configured using the > xen > >> centre admin once cloudstack is implemented. > >> > >> Regards > >> Ian > >
