By default console proxy will run in HTTP mode and listen on port 80.
If you wish to run on HTTPS, you will need to set up your own DNS and SSL
certificate.
The wiki you mentioned needs to be updated with current info :-)

For the second part of not being able to reach the web service - I'd start
by checking if I can ping the web server machine, and review the security
policies of the network attached to this VM (security groups if any,
ingress/egress rules etc)

HTH
Amogh

On 11/17/14 11:17 PM, "Tilak Raj Singh" <tila...@gmail.com> wrote:

>Hi..
>
>I am using cloudstack 4.4.1 on a single machine
>As I can see in global settings there is no value assigned to
>consoleproxy.url.domain. The field is empty. Do I have to assign any value
>in there?
>
>I reinstalled cloudstack from start again. Now I can access the machines
>using the console button but still the output of
>
>netstat -na | grep 443 gives nothing
>
>Further information about my setup
>
>Management server ip 172.31.101.202
>gateway 172.31.100.1
>dns 172.31.100.6, 172.31.100.8
>private ip pool 172.31.101.210-172.31.101.230
>public ip pool 172.31.101.240-172.31.101.250
>
>v-1-vm :- public  ip 172.31.101.245
>             private ip 172.31.101.222
>             link local ip 169.254.0.117
>
>s-2-vm :-  public  ip 172.31.101.250
>             private ip 172.31.101.210
>             link local ip 169.254.3.141
>
>r-4-vm :- public ip 172.31.101.249
>             link local ip 169.254.3.10
>
>the testmachine is running at ip 172.31.101.248
>
>the issue I am facing now is that i created an apache webservice on my
>test
>machine i.e. 172.31.101.248
>this service can be accessed by the browser of the management server i.e.
>172.31.101.202
>but i cant access it from my room i.e. 172.31.84.72 (its a different
>subnet)
>the management server is located in the server room of my college with
>default gateway of 172.31.100.1 mask 255.255.252.0
>
>route -n on the management server gives
>
>route -n
>Kernel IP routing table
>Destination     Gateway         Genmask         Flags Metric Ref    Use
>Iface
>172.31.100.0    0.0.0.0         255.255.252.0   U     0      0        0
>cloudbr0
>169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0
>cloud0
>0.0.0.0         172.31.100.1    0.0.0.0         UG    0      0        0
>cloudbr0
>
>here cloudbr0 is the network bridge i created on my management server
>and sent all the requests from eth0 to cloudbr0
>
>and on the virtual machine hosting the service gives
>
>route -n
>Kernel IP routing table
>Destination     Gateway         Genmask         Flags Metric Ref    Use
>Iface
>172.31.100.0    0.0.0.0         255.255.252.0   U     0      0        0
>eth0
>169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0
>eth0
>0.0.0.0         172.31.100.1    0.0.0.0         UG    0      0        0
>eth0
>
>So what do i need to do to make the webservice running on my virtual
>machine to be accessible from the system in my room??
>The virtual machine can access the webservices running on the machine in
>my
>room but vice versa is not possible
>the virtual machine can also access the internet.
>So do I need to make any changes in the router 172.31.100.1 or the fault
>is
>somewhere in my installation or there is some other issue??
>
>Please help
>
>On Mon, Nov 17, 2014 at 3:29 AM, Amogh Vasekar <amogh.vase...@citrix.com>
>wrote:
>
>> Hi,
>>
>> Which version of CS are you on? Also, what is the value of
>> consoleproxy.url.domain global parameter?
>>
>> Amogh
>>
>> On 11/15/14 2:57 AM, "Tilak Raj Singh" <tila...@gmail.com> wrote:
>>
>> >hello everyone.
>> >I am new to cloudstack and I am having a issue with my cloudstack
>> >installation.when i try to hit the console button of my vm the browser
>> >says
>> >request timed out. It was working earlier but now its not after I
>>rebooted
>> >my machine once.
>> >
>> >i tried to ssh into my console proxy and check all the commands listed
>> >here
>> >
>> 
>>https://cwiki.apache.org/confluence/display/CLOUDSTACK/View+Console+and+C
>>o
>> >nsole+Proxy+Troubleshooting
>> >
>> >netstat -na | grep 443
>> >
>> >This command gives no output. As i can understand port 443 is not
>>bound to
>> >java. All the other commands are running.
>> >I even restarted my console proxy and also tried running command
>>"service
>> >cloud restart" from the console proxy to looked at the
>>/var/log/cloud.log
>> >file. But nothing seems to be any problem there.
>> >
>> >Can anybody please help me with this issue.
>> >
>> >Regards,
>> >Tilak Raj Singh
>>
>>

Reply via email to