On 2015-06-04 00:37, Sanjeev N wrote:
If VR and VM on the same host works fine, then some vlan configuration is
missing on the switch connecting both the hosts. Make sure you have
configured the switch ports as tagged and allow all the vlans being used
for guest and public networks.
Everything was working under 4.3 and I've been able to manually setup vlan's and transmit data between hosts.

On 2015-06-03 21:08, ilya wrote:
Mike

We are missing context of your lab setup.

Perhaps TCP dump can help with debugging?
I'll see if I can grab a TCP dump soon. I've included my overall config below if it might help.

===
= Zone Network/VLAN Setup
===
Physical Network
  CloudStack
Public: vlan, ip ranges in 172.16.17.0/24 and vlan://untagged ; cloudbr0 as adapter Guest: ip range 172.16.18.0/24 and vlans 1201 - 1225 ; cloudbr1 as adapter
  Management
    ip's in range 172.16.16.0/24
    mgmtbr0 as adapter

===
= Source network cconfig
===
Management: mgmbr0 -> eth0 -> multiple ip's specified, each in 172.16.16.0/24 range
cloudbr0: bond0.1100 -> p1p1 p1p2 -> no ip address specified
cloudbr1: bond0.1200 -> p1p1 p1p2 -> no ip address specified
bond0: mode balance-alb -> no ip address specified


===
= Destination network config
===
Management: mgmtbr0 -> eth1 -> one ip specified in 172.16.16.0/24 range
cloudbr0: eth0.1100 -> no ip address specified
cloudbr1: eth0.1200 -> no ip address specified

Reply via email to