Use "route -n" to see what your default gateway is. If you have wrong GW - you will not be able to reach anything outside network. It should not be always x.x.x.1, but usually is.
Vadim. -----Original Message----- From: Borhan Asgharnejad [mailto:[email protected]] Sent: Wednesday, August 12, 2015 8:57 PM To: [email protected] Subject: Re: Register iso so slow. my gateway is 192.168.76.2, could the problem cause the Gateway? i read in quick installation need /24 network with gateway XXX.XXX.XXX.1. i install centos 6.6 on vmware workstation. and setup cloud stack on it. On Wed, Aug 12, 2015 at 10:23 PM, Borhan Asgharnejad < [email protected]> wrote: > hi Sam > yes i did it. but still the problem exist. > > On Wed, Aug 12, 2015 at 10:15 PM, Sam Ceylani > <[email protected]> > wrote: > >> Borhan, did you try running your server at port 8080? there are some >> hard coded stuff for this port in the code and secstorage allowed >> sites etc. I asked this yesterday but couldnt get an answer from you >> :) >> >> Sent from my iPhone >> >> > On Aug 12, 2015, at 1:02 PM, Borhan Asgharnejad < >> [email protected]> wrote: >> > >> > sorry set secstorage.allowed.internal.sites to 192.168.76.0/24 >> > <http://192.168.76.9/24> >> > >> > On Wed, Aug 12, 2015 at 9:07 PM, Borhan Asgharnejad < >> [email protected] >> >> wrote: >> > >> >> hi >> >> this is ssvm check result and of course i set >> >> secstorage.allowed.internal.sites to 192.168.76.9/24. but after >> register >> >> iso it just create empty file in 192.168.76.5:/secondary (i mean >> >> the >> size >> >> of file 0kb) >> >> >> >> >> >> First DNS server is 8.8.8.8 >> >> PING 8.8.8.8 (8.8.8.8): 48 data bytes >> >> 56 bytes from 8.8.8.8: icmp_seq=0 ttl=128 time=670.263 ms >> >> 56 bytes from 8.8.8.8: icmp_seq=1 ttl=128 time=749.591 ms >> >> --- 8.8.8.8 ping statistics --- >> >> 2 packets transmitted, 2 packets received, 0% packet loss >> >> round-trip min/avg/max/stddev = 670.263/709.927/749.591/39.664 ms >> >> Good: Can ping DNS server >> >> ================================================ >> >> Good: DNS resolves download.cloud.com >> >> ================================================ >> >> nfs is currently mounted >> >> Mount point is >> >> /mnt/SecStorage/74b7fe22-5937-3f2a-b2a2-8f9dbdc54631 >> >> Good: Can write to mount point >> >> ================================================ >> >> Management server is 192.168.76.5. Checking connectivity. >> >> Good: Can connect to management server port 8250 >> >> ================================================ >> >> Good: Java process is running >> >> ================================================ >> >> Tests Complete. Look for ERROR or WARNING above. >> >> >> >> On Wed, Aug 12, 2015 at 7:32 PM, Somesh Naidu >> >> <[email protected] >> > >> >> wrote: >> >> >> >>> Hi Borhan, >> >>> >> >>>> i figure out when i try get iso >> >>>> file on SSVM by wget command (wget >> >>>> http://192.168.76.5/isoname.iso) <http://10.39.1.9/isoname.iso> >> >>>> say cannot write to 'isoname <http://10.39.1.9/isoname.iso>.iso' (No >> >>>> space left on device). >> >>> >> >>> This probably won't work if you were using SSVM's root disk as a >> target >> >>> for download as it size is limited to 2 GB. >> >>> >> >>> I believe this is internal IP "192.168.76.5", if that's true, >> >>> have you added this IP to the global config >> "secstorage.allowed.internal.sites"? >> >>> >> >>> Also, as Prashant and Sam recommended, validate all is fine with >> >>> SSVM >> by >> >>> performing troubleshooting as mentioned on the wiki. >> >>> >> >>> Regards, >> >>> Somesh >> >>> >> >>> >> >>> -----Original Message----- >> >>> From: Sam Ceylani [mailto:[email protected]] >> >>> Sent: Wednesday, August 12, 2015 2:58 AM >> >>> To: [email protected] >> >>> Subject: RE: Register iso so slow. >> >>> >> >>> It only accepts it on port 8080 don’t ask me why, in theory yes >> >>> port >> 80 >> >>> is ok and yes you can but I never get it to work, try running >> >>> your web server on port 8080 and give it a try :) >> >>> >> >>> -----Original Message----- >> >>> From: Vadim Kimlaychuk [mailto:[email protected]] >> >>> Sent: Wednesday, August 12, 2015 2:55 AM >> >>> To: [email protected] >> >>> Subject: RE: Register iso so slow. >> >>> >> >>> Hi, Borhan >> >>> >> >>> Is your SSVM up and agent status is "connected"? Can you >> confirm >> >>> that troubleshooting SSVM ( >> >>> >> https://cwiki.apache.org/confluence/display/CLOUDSTACK/SSVM,+template >> s,+Secondary+storage+troubleshooting >> ) >> >>> gives OK status? >> >>> >> >>> Regards, >> >>> >> >>> Vadim. >> >>> >> >>> >> >>> -----Original Message----- >> >>> From: Borhan Asgharnejad [mailto:[email protected]] >> >>> Sent: Wednesday, August 12, 2015 9:44 AM >> >>> To: [email protected] >> >>> Subject: Re: Register iso so slow. >> >>> >> >>> Hi Vadiam >> >>> The SSVM and CPVM is running and up. >> >>> The status of registering iso is null, and i figure out when i >> >>> try get iso file on SSVM by wget command (wget >> http://192.168.76.5/isoname.iso) < >> >>> http://10.39.1.9/isoname.iso> say cannot write to 'isoname < >> >>> http://10.39.1.9/isoname.iso>.iso' (No space left on device). i >> >>> have problem to register iso could you please tell me what can i >> >>> do. by >> the way >> >>> i have about 400 GB free space on secondary storage. >> >>> >> >>> On Wed, Aug 12, 2015 at 9:45 AM, Vadim Kimlaychuk < >> >>> [email protected] >> >>>> wrote: >> >>> >> >>>> Hello Borhan, >> >>>> >> >>>> >> >>>> >> >>>> 1. It all depends on the speed of you network, storage and >> size of >> >>>> the ISO image. If you analyze the whole process chain -- you >> >>>> can >> find >> >>>> bottlenecks. Then you can (probably) optimize something. It is >> >>>> better to show numbers here to be able to judge. >> >>>> >> >>>> 2. Go to ISO, Zone tab, klick on zone and you will see ISO >> details >> >>>> tab with downloaded % and status. >> >>>> >> >>>> >> >>>> >> >>>> Vadim. >> >>>> >> >>>> >> >>>> >> >>>> -----Original Message----- >> >>>> From: Borhan Asgharnejad [mailto:[email protected]] >> >>>> Sent: Wednesday, August 12, 2015 8:53 AM >> >>>> To: [email protected] >> >>>> Subject: Register iso so slow. >> >>>> >> >>>> >> >>>> >> >>>> Hi All, >> >>>> >> >>>> 1- Could you please guide me how i increase speed of registering >> >>>> iso template. >> >>>> >> >>>> 2- how could see percentage of iso that uploaded to ssvm in >> >>>> cloud stack 4.5. >> >> >> >> >> > >
