@Jayapal can you verify VPN is supposed to work on Mac OSX or not?
On 10/09/15 01:47, "Jeremy Peterson" <[email protected]> wrote: >So I'm still looking into this has anyone ever tried this? > >Do you have anyone I can talk to? > >I've been asking since 8.29.2015 > >I guess the issue is on a Mac since my VPN network is 10.1.2.0/24 and my VPC >network is 192.168.2.0/24 he cannot connect. >I tested it out on windows 8, 7, 10, 8.1 all work as expected. > >I don't have a Mac I can test with so I was hoping someone here would have any >advise. > >Jeremy > >-----Original Message----- >From: Jeremy Peterson [mailto:[email protected]] >Sent: Tuesday, September 8, 2015 8:12 AM >To: [email protected] >Subject: RE: VPC VPN Connectivity Issues > >No my issue is not resolved I've been reaching out to the IRC channel and have >not received notification of anyone knowing what my issue could be. > >It would be great to get some traction this week on the issue. I keep having >to open ACL for public access to the servers as this user is unable to get to >the server via VPN. > >Jeremy > >-----Original Message----- >From: Remi Bergsma [mailto:[email protected]] >Sent: Saturday, September 5, 2015 10:11 AM >To: <[email protected]> <[email protected]> >Subject: Re: VPC VPN Connectivity Issues > >Hi Jeremy, > >Did you already solve your problem? > >Not sure if it is possible to use the IPSec tunnels from remote VPN. Firewall >might be too strict, but haven't looked yet. > >Regards, Remi > >Sent from my iPhone > >> On 29 Aug 2015, at 17:00, Jeremy Peterson <[email protected]> wrote: >> >> I am not sure if this was asked or answered but googling has led me no where. >> >> >> I am running cloudstack 4.5.0, XenServer 6.5, Advanced networking w/ VLAN >> segmentation. >> >> >> I have a VPC setup which i am using a IPSec tunnel back to a zywall firewall >> and a monowall firewall. >> >> >> Monowall Cloustack VPC zywall >> >> 192.168.1.0/24 192.168.2.0/24 192.168.71.0/24 >> >> >> Tunnels are setup in vpc for both locations and servers in cloudstack can >> connect to the world and connect to the monowall and zywall networks. >> >> >> Everything is fine with that but when I have a remote user that needs to VPN >> into the cloudstack VPC is where i am thrown into a whirlwind of questions. >> >> >> I setup a VPN connection on the VR for the VPC. >> >> I setup username/password. >> >> >> The user sets up the connection on his Mac OSX and using split tunnel can >> connect to the VPN. >> >> >> My VPN network is 10.1.2.0/24 >> >> >> He receives a 10.1.2.3 ip address. >> >> >> He is unable to ping the IPSec Tunnel gateways 192.168.1.1 and 192.168.71.1. >> >> >> He can get to the world as his default gateway is his router. >> >> >> I switched to push all traffic over the VPN to remove the split tunnel. >> >> >> He is able to ping the 10.1.2.1 gateway on the VR >> >> >> He is able to ping his gateway the VPC router 10.1.2.1. >> >> >> He is able to ping the VPC network's gateway 192.168.2.1 >> >> He is unable to get to the world. I try to ping google dns 8.8.8.8 and it >> doesnt' get past the VR 10.1.2.1 in traceroutes. >> >> I am looking for help on this as i'm confused. If I change him back to a >> split tunnel as that would be prefered why is the tunnel not annoucing all >> networks know to the VR. >> >> I was able to recreate this issue on windows 8.1. >> >> ?Jeremy
