I don't use XenServer maintenance mode until after CloudStack has put the Host in maintenance mode.
When you initiate maintenance mode from the host rather than CloudStack the db does not know where the VM's are and your UUID's get jacked. CS is your brains not the hypervisor. Maintenance in CS. All VM's will migrate. Maintenance in XenCenter. Upgrade. Reboot. Join Pool. Remove Maintenance starting at hypervisor if needed and then CS and move on to the next Host. CloudStack should always do the migration of VM's not the Hypervisor. Jeremy -----Original Message----- From: Davide Pala [mailto:davide.p...@gesca.it] Sent: Friday, January 1, 2016 5:18 PM To: users@cloudstack.apache.org Subject: R: A Story of a Failed XenServer Upgrade Hi alessandro. If u put in maintenance mode the master you force the election of a new pool master. Now when you have see the upgraded host as disconnected you are connected to the new pool master and the host (as a pool member) cannot comunicate with a pool master of an earliest version. The solution? Launche the upgrade on the pool master without enter in maintenance mode. And remember a consistent backup!!! Inviato dal mio dispositivo Samsung -------- Messaggio originale -------- Da: Alessandro Caviglione <c.alessan...@gmail.com> Data: 01/01/2016 23:23 (GMT+01:00) A: users@cloudstack.apache.org Oggetto: A Story of a Failed XenServer Upgrade Hi guys, I want to share my XenServer Upgrade adventure to understand if I did domething wrong. I upgraded CS from 4.4.4 to 4.5.2 without any issues, after all the VRs has been upgraded I start the upgrade process of my XenServer hosts from 6.2 to 6.5. I do not already have PoolHA enabled so I followed this article: http://www.shapeblue.com/how-to-upgrade-an-apache-cloudstack-citrix-xenserver-cluster/ The cluster consists of n° 3 XenServer hosts. First of all I added manage.xenserver.pool.master=false to environment.properties file and restarted cloudstack-management service. After that I put in Maintenance Mode Pool Master host and, after all VMs has been migrated, I Unmanaged the cluster. At this point all host appears as "Disconnected" from CS interface and this should be right. Now I put XenServer 6.5 CD in the host in Maintenance Mode and start a in-place upgrade. After XS6.5 has been installed, I istalled the 6.5SP1 and reboot again. At this point I expected that, after click on Manage Cluster on CS, all the hosts come back to "UP" and I could go ahead upgrading the other hosts.... But, instead of that, all the hosts still appears as "Disconnected", I tried a couple of cloudstack-management service restart without success. So I opened XenCenter and connect to Pool Master I upgraded to 6.5 and it appear in Maintenance Mode, so I tried to Exit from Maint Mode but I got the error: The server is still booting After some investigation, I run the command "xe task-list" and this is the result: uuid ( RO) : 72f48a56-1d24-1ca3-aade-091f1830e2f1 name-label ( RO): VM.set_memory_dynamic_range name-description ( RO): status ( RO): pending progress ( RO): 0.000 I tried a couple of reboot but nothing changes.... so I decided to shut down the server, force raise a slave host to master with emergency mode, remove old server from CS and reboot CS. After that, I see my cluster up and running again, so I installed XS 6.2SP1 on the "upgraded" host and added again to the cluster.... So after an entire day of work, I'm in the same situation! :D Anyone can tell me if I made something wrong?? Thank you very much!
