Looks like you have a default route over the VPN interface. Look in the connection settings, I am not a Windows user so not entirely sure where to look, but probably in the Networking or IPv4 settings, and see if you find any marked settings that would use this as default route.
-- Erik On Wed, Feb 10, 2016 at 10:32 AM, kotipalli venkatesh < venkateshcloudt...@gmail.com> wrote: > Thank you for your quick response Erik. > > I am using OS Windows 10. > > After connected Remote VPN. in our laptop command line run the command > route print below are the rules: > > > C:\Users\kotip>route print > =========================================================================== > Interface List > 34...0a 3e 8e 28 32 f8 ......Microsoft Wi-Fi Direct Virtual Adapter > 102...........................VPN Connection > 31...08 3e 8e 28 32 f8 ......Broadcom 802.11n Network Adapter > 17...00 ff 92 16 99 66 ......TAP-Win32 Adapter OAS #2 > 4...00 ff 0e aa 70 9f ......TAP-Win32 Adapter OAS #3 > 33...00 ff f5 48 25 c3 ......TAP-Win32 Adapter OAS #4 > 35...00 ff f8 ff 07 05 ......TAP-Win32 Adapter OAS #5 > 5...00 ff 21 ab 40 41 ......TAP-Win32 Adapter OAS #6 > 32...00 ff e8 08 7b d0 ......TAP-Win32 Adapter OAS #7 > 23...00 ff b2 90 4a 0f ......TAP-Win32 Adapter OAS #8 > 27...00 ff d3 b1 bb eb ......TAP-Win32 Adapter OAS #14 > 20...00 ff a5 fb 8a 9f ......TAP-Win32 Adapter OAS #9 > 3...00 ff 09 f6 ea 32 ......TAP-Win32 Adapter OAS #10 > 11...00 ff 73 3c 41 2b ......TAP-Win32 Adapter OAS #11 > 30...00 ff e2 ee 73 1e ......TAP-Win32 Adapter OAS #12 > 18...00 ff 9e 00 49 f9 ......TAP-Win32 Adapter OAS #13 > 25...00 ff c7 ae ee 98 ......TAP-Win32 Adapter OAS #15 > 15...00 ff 7d 9a 76 dd ......TAP-Win32 Adapter OAS #16 > 2...00 ff 00 f8 37 77 ......TAP-Win32 Adapter OAS #17 > 28...00 ff de 53 c3 e2 ......TAP-Win32 Adapter OAS #18 > 1...........................Software Loopback Interface 1 > 21...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter > 36...00 00 00 00 00 00 00 e0 Microsoft Teredo Tunneling Adapter > 10...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 > =========================================================================== > > IPv4 Route Table > =========================================================================== > Active Routes: > Network Destination Netmask Gateway Interface Metric > 0.0.0.0 0.0.0.0 10.0.0.1 10.0.0.118 4250 > 0.0.0.0 0.0.0.0 On-link 10.1.2.2 26 > 10.0.0.0 255.255.255.0 On-link 10.0.0.118 4506 > 10.0.0.118 255.255.255.255 On-link 10.0.0.118 4506 > 10.0.0.155 255.255.255.255 On-link 10.0.0.118 4251 > 10.0.0.255 255.255.255.255 On-link 10.0.0.118 4506 > 10.1.2.2 255.255.255.255 On-link 10.1.2.2 281 > 127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531 > 127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531 > 127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531 > 224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531 > 224.0.0.0 240.0.0.0 On-link 10.0.0.118 4506 > 224.0.0.0 240.0.0.0 On-link 10.1.2.2 26 > 255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531 > 255.255.255.255 255.255.255.255 On-link 10.0.0.118 4506 > 255.255.255.255 255.255.255.255 On-link 10.1.2.2 281 > =========================================================================== > Persistent Routes: > None > > IPv6 Route Table > =========================================================================== > Active Routes: > If Metric Network Destination Gateway > 1 306 ::1/128 On-link > 31 281 fe80::/64 On-link > 31 281 fe80::3db9:1161:eae0:8ac1/128 > On-link > 1 306 ff00::/8 On-link > 31 281 ff00::/8 On-link > =========================================================================== > Persistent Routes: > None > > C:\Users\kotip> > > Regards, > Venkatesh.k > > On Wed, Feb 10, 2016 at 1:31 PM, Erik Weber <terbol...@gmail.com> wrote: > > > Depending on your OS you might have to remove the flag that default > routes > > through the VPN. > > How you do that vary on OS. > > > > > > At least, could you check your routing table? > > > > -- > > Erik > > > > On Wed, Feb 10, 2016 at 7:24 AM, kotipalli venkatesh < > > venkateshcloudt...@gmail.com> wrote: > > > > > Hi All, > > > > > > We established Remote VPN connection, the connection working is good. > > After > > > connecting to VPN through my laptop internet showing "*LIMITED ACCESS" > * > > > > > > *CS Version : 4.5.1* > > > *Xenserver : 6.2* > > > > > > If any one resolve this scenario please share the knowledge. > > > > > > Regards, > > > Venkatesh.k > > > > > >
