Re: FW: Password reset, not work after adding new Guest IP Class

Tue, 31 May 2016 08:19:21 -0700 

Hey Cristian

Can you go on the VR and try to run a ping from there ?

procedure on VR:

1- update the ping util ( apt-get install iputils-ping )
2- run a ping test with different source IP ( ping -I sourceIP DestIP ctrl-c to stop the ping ) 

  - source IP : use the IP configured on the VR
- destination IP : try to ping the gateway, an IP on the other range that should be reachable and not configured on the VR and another public IP... 

  a-1) ping -I 159.X.X.X 167.X.X.X-GW

  a-2) ping -I 159.X.X.X 167.X.X.X-IP

  a-3) ping -I 159.X.X.X 8.8.8.8

  b-1) ping -I 167.X.X.X 159.X.X.X-GW

  b-2) ping -I 167.X.X.X 159.X.X.X-IP

  b-3) ping -I 167.X.X.X 8.8.8.8

  post me the result...
3- re-load the original ping util... ( apt-get install inetutils-ping - or destroy / re-create your VR... )
Normally, your core router should know about these two IP ranges, if so, you can just force the core router to route one IP range to the other range and set only one default gateway in Cloudstack/public ip range... 

Marcus



On 2016-05-31 3:17 AM, Cristian Ciobanu wrote:

Hi Marcus,

    First of all, thanks for answer.

    - I don't have access to border router ( i will try to get access )
    - Yes, each IP range have their gateway
    - I'm not sure why is working after VR reboot/ each reboot, looks lie is 
doing a switch from , i also provided a screenshot where i run a ping test from 
IP X to Gateway Y

     Please see:  http://i.imgur.com/T0w3fdZ.jpg


Regards,
Cristian

-----Original Message-----
From: Marc-Andre Jutras [mailto:mar...@marcuspocus.com]
Sent: Monday, May 30, 2016 9:46 PM
To: users@cloudstack.apache.org
Subject: Re: FW: Password reset, not work after adding new Guest IP Class

Hi Cristian,

Sound like a networking issue // gateway mismatch on your side and not an issue 
with ACS: TCP packet seems to be blocked on the border router... ie: ip on 
159.X.X.X network is trying to reach your ACS server via the 167.X.X.X gateway 
or vice-versa; VR is not managing two different default gateway !

Do you have some control or can modify config on your border router ? ( where 
both ip range got their gateway ? ) if so, check there to allow source IP : 
159.X to be able to reach GW : 167 or vice-versa...

Marcus

On 2016-05-19 4:29 AM, Cristian Ciobanu wrote:

Hello All,


I will insist on this topic because i don’t recevied any answer, i just want to 
know if is possibile to fix this issue.


Thank you !

Cristian


From: Cristian Ciobanu [mailto:cristian.c@istream.today]
Sent: Monday, May 16, 2016 10:35 AM
To: users@cloudstack.apache.org
Subject: RE: Password reset, not work after adding new Guest IP Class


Hello,


      This issue persist, each time i have to reboot the VR.


      Example.


       IP class - X

       IP class – Y


1.      Build VM  from IP class X, password reset on deploy works

2.      Build VM  from IP class X, password reset on deploy works

3.      Build VM  from IP class X, password reset on deploy works

4.      Build VM  from IP class Y, not working

5.      Reboot VR

6.      Build VM  from IP class Y, password reset on deploy works

7.      Build VM  from IP class Y, password reset on deploy works

8.      Remove a VM from IP class X

9.      Build VM from IP class X, not working

10.   Each time is switch from Y to X and vice versa i need to reboot VR


       I have this issue with any OS, also i have 2 Enviorments  with
ACS 4.5.2 Vmware 5.5


     Can i get some help ?


From: Cristian Ciobanu [mailto:cristian.c@istream.today]
Sent: Saturday, March 26, 2016 3:06 PM
To: users@cloudstack.apache.org <mailto:users@cloudstack.apache.org>
Subject: Re: Password reset, not work after adding new Guest IP Class


Can someone help me regarding my issue ?   for sure this is a CS bug, but i 
need to know if this can be solved on 4.5.2


Thank you all

Cristian

On 25.03.2016 21:41:06, Cristian Ciobanu <cristian.c@istream.today 
<mailto:cristian.c@istream.today> > wrote:

Hi,


        Yes, i have basic zone configured on my ACS environment, also i was 
able to see two networks on VR only after i did rebuild for the router.


          1 x IP class 158.X  /28

          2 x IP class 167.X  /28


       1. Rebuild router

       2. Removed VM's in order to retest a deploy on first (158.X)IP
Class

       3. Deploy VM, everything works, also after this deploy i don't
have available IP's from this class (158.X)

       4. Deploy VM on secondary IP class (167.X) , password not working, i was 
able to login on VM only with static password.

       5. Removed VM from class(158.X)

       6 Deploy VM on (158.X)  Not working again


        Please see the screenshots, i don't provided screenshot from VM when 
generated password works :


         Zone/Guest : http://i.imgur.com/h2npDcP.jpg

         VR: http://i.imgur.com/TsCTRu6.jpg and
http://i.imgur.com/TsCTRu6.jpg

         Pods: http://i.imgur.com/y0Oqgk9.jpg

         VR ip a : http://i.imgur.com/7MBzggM.jpg

         VM (test linux ) : http://i.imgur.com/uWtTIpI.jpg

         VM (test Windows) :http://i.imgur.com/T0w3fdZ.jpg


     Thank you !


Regards,

Cristian

On 25.03.2016 19:49:57, Stephan Seitz <s.se...@secretresearchfacility.com 
<mailto:s.se...@secretresearchfacility.com> > wrote:

Hi!

Did you add two networks with dhcp? what shows your guests routing
table? obviously two default gateways? did you check if your virtual
router is reachable from within the guest?

Am Freitag, den 25.03.2016, 15:18 +0200 schrieb Cristian Ciobanu:

Hello,

Looks like after adding a second IP class for Guest, password
generator is not working for New VM on first deploy and password
reset.

Password is provided on CloudStack but when i try to login on new VM
is not working.

I just added a another /28 for the moment i have 2 x /28 on this zone
running on ACS 4.5.2 with VMware 5.5.


Any info/help ?


Thank you !

Regards,
Cristian

Reply via email to