Hello Dag,

Sorry for that but I founded the two logs and I attached them .

Also I use the local storage as primary storage and three secondary shares (two 
of them on centos NFS and one another in xenserver that have the error)

Can you please advise if you able to find anything useful in the logs

Best Regards,
EtQ, Inc.
Ghaith Bannoura
System Administrator
MCT, MCSE (Messaging, Server Infrastructure)
MCSA (Windows Server 2008, 2012), MCP 

   Phone: +9626-537-0923 Ext. 376
   [email protected] 
G   http://www.etq.com

-----Original Message-----
From: Dag Sonstebo [mailto:[email protected]] 
Sent: Wednesday, October 5, 2016 12:11 PM
To: [email protected]
Subject: Re: Error in creating new instances

Hi Ghait,

It seems very odd that you don’t have a /var/log/SMlog file – this should be 
present. Lacking that also check your /var/log/xensource.log and messages files.

Can you also explain what provides your NFS secondary and primary shares?

Regards,
Dag Sonstebo

On 04/10/2016, 20:09, "Ghaith Bannoura" <[email protected]> wrote:

    Hi Dag,
    
    I tested the write in NFS and its working normally , and for the SMLog I 
didn't found such log file 
    
    Please note that I'm using xenserver 6.5 
    
    Best Regards
    
    Ghaith Bannoura
    
    
    -----Original Message-----
    From: Dag Sonstebo [mailto:[email protected]] 
    Sent: Tuesday, October 4, 2016 4:31 PM
    To: [email protected]
    Subject: Re: Error in creating new instances
    
    Hi Ghait,
    
    When you mounted the NFS share in XenCentre did you check if you could 
write to it? (you can test this from command line on the XenServer)?
    
    One other thing to check is the /var/log/SMLog file on the XenServer in 
question.
    
    Regards,
    Dag Sonstebo
    
    On 04/10/2016, 12:55, "Ghaith Bannoura" <[email protected]> wrote:
    
        I tested NFS  using xencenter  and its working normally , also the 
server  have static ip address that not changed , and for the permissions I 
provide it with full permissions for all folders .
        
        Any other suggestion 
        
        Thanks in Advance
        
        Best Regards,
        EtQ, Inc.
        Ghaith Bannoura
        System Administrator
        MCT, MCSE (Messaging, Server Infrastructure)
        MCSA (Windows Server 2008, 2012), MCP 
        
           Phone: +9626-537-0923 Ext. 376
           [email protected] 
        G   http://www.etq.com
        
        -----Original Message-----
        From: Dag Sonstebo [mailto:[email protected]] 
        Sent: Tuesday, October 4, 2016 12:59 PM
        To: [email protected]
        Subject: Re: Error in creating new instances
        
        Hi Ghait,
        
        The SR_BACKEND_FAILURE_61 is returned by xapi on your XenServers – and 
together with the “fail to mount FileSR” error this basically looks like you 
have some environmental issue outside CloudStack, i.e. between your XenServer 
and the NFS secondary storage head. First of all check network connectivity 
between the two. If this is OK check the permissions / ACLs set on your NFS 
share – chances are the XenServer IP is not permitted. You can also try to just 
temporarily mount the NFS share directly from the XenServer / XenCentre 
(remember to unmount it later before putting it back into production) and see 
if you can access the share.
        
        Regards,
        Dag Sonstebo
        Cloud Architect
        ShapeBlue
        
        From: Ghaith Bannoura <[email protected]>
        Reply-To: "[email protected]" <[email protected]>
        Date: Tuesday, 4 October 2016 at 08:45
        To: "[email protected]" <[email protected]>
        Subject: Error in creating new instances
        
        Hello All,
        
        I have Cloud stack version 4.8.0 with basic zone xenserver 6.5 , I have 
3 secondary storages two of them working fine but I have NFS shared from 
xenserver as secondary storage .
        
        After restart the xenserver that have the secondary storage a problem 
occur when create any instance from templates that exist in secondary storage 
inside the xenserver , I attached log for the job , I believe the error is as 
below
        
        “2016-10-04 10:16:36,145 DEBUG [o.a.c.e.o.VolumeOrchestrator] 
(Work-Job-Executor-166:ctx-a6b8f69f job-32042/job-32044 ctx-bf62c9d5) 
(logid:2c9e5bb6) Unable to create Vol[3392|vm=2619|ROOT]:Catch Exception 
com.cloud.utils.exception.CloudRuntimeException for template due to 
com.cloud.utils.exception.CloudRuntimeException: createFileSR failed! due to 
the following: SR_BACKEND_FAILURE_61File SR creation error [opterr=fail to 
mount FileSR. Errno is 32]
        com.cloud.exception.StorageUnavailableException: Resource 
[StoragePool:6] is unreachable: Unable to create Vol[3392|vm=2619|ROOT]:Catch 
Exception com.cloud.utils.exception.CloudRuntimeException for template due to 
com.cloud.utils.exception.CloudRuntimeException: createFileSR failed! due to 
the following: SR_BACKEND_FAILURE_61File SR creation error [opterr=fail to 
mount FileSR. Errno is 32]”
        
        please advice how can I fix this problem in order to be able to create 
any new instance from the templates inside this secondary storage
        
        Best Regards,
        
        Ghaith Bannoura
        
        
        
        
        [email protected]
        www.shapeblue.com
        53 Chandos Place, Covent Garden, London  WC2N 4HSUK @shapeblue
          
         
        
        
    
    
    [email protected]
    www.shapeblue.com
    53 Chandos Place, Covent Garden, London  WC2N 4HSUK @shapeblue
      
     
    
    


[email protected]
www.shapeblue.com
53 Chandos Place, Covent Garden, London  WC2N 4HSUK @shapeblue
  
 

Reply via email to