Hi all, I haven't found a combination Network Offering+Guest Network settings to make SNAT work for VMs
After many days trying, I cannot make Static NAT working in Virtual Router, my setup is the following: Public network: untagged Private network: VLAN 58 MGMT Network: VLAN 10 Public needs to go untagged because we cannot change the switch settings as it is from other provider. Open vSwitch for Bridges. * The VM can ping the VR and the VR can ping the VM, but as soon as I assign a static IP to the VM with SNAT with the VR, all communication is lost in that VM, I have to remove the static IP to make it pingable again. I have isolated the problem to the VR, I can see with tcpdump the ICMP requests coming in via public interface but no response is echoed. Can anyone share their setup for static NAT with VR? Thanks. Network offering created for this setup: NatNet2: Guest Type Isolated Persistent No Egress Default Policy Allow Availability Optional Created by system No Specify VLAN Yes Specify IP ranges No Conserve mode Yes Network Rate (Mb/s) 200 Mb/s Traffic Type Guest Supports Streched L2 Subnet No Supported Services Dhcp, Firewall, SourceNat, StaticNat Service Capabilities Dhcp: VirtualRouter, Firewall: VirtualRouter, SourceNat: VirtualRouter, StaticNat: VirtualRouter Guest Network created using this network offering: NatNet4: Name NatNet4 ID 53e809a3-bb5f-4fa3-9a72-12be46614131 Zone Advzone Description NatNet4 Type Isolated State Setup VPC ID N/A Persistent No Restart required No VLAN/VNI ID 58 broadcasturi vlan://58 Network Offering NatNet2 CIDR 172.16.58.0/24 Network CIDR IPv6 Gateway IPv6 CIDR Reserved IP Range Network Domain Domain ROOT Account admin
