Hi Simon, Thats very interesting. Do you use openvSwitch underneath on the hypervisor or default Linux bridging ? Also what is your preference?
Thanks, Imran -----Original Message----- From: Simon Weller [mailto:swel...@ena.com] Sent: Saturday, April 15, 2017 1:35 AM To: users@cloudstack.apache.org Subject: Re: OVS Plugin We trunk a vlan down to the hosts, make it the KVM traffic label for the guest network (we run VPCs in advanced mode) and allow ACS to build the VXLAN VNI within the vlan. The native VXLAN support in the linux kernel uses multicast, so you do need an ip on the interface (we use a different network per cluster). We utilize both Whitebox and Brocade switches, all 10G SFP+ for frontend and backend connectivity. Each host blade has 4 x 10GB, 2 for the front end and 2 for the storage connectivity. The VR terminates the guest network, and you can then plugin a vlan in for public and private gateway access. We'll actually be presenting our design in Miami at the Cloudstack Conference, so ilya, you have an excuse to make the trip now! - Si ________________________________ From: ilya <ilya.mailing.li...@gmail.com> Sent: Friday, April 14, 2017 3:17 PM To: users@cloudstack.apache.org Subject: Re: OVS Plugin Hi Simon Would you mind expanding a little more on your setup? Specifically what is being used underneath. thanks ilya On 4/14/17 9:11 AM, Simon Weller wrote: > I'd strongly suggest you consider using the native VXLAN support for KVM. It works extremely well and we run it in production. > > > - Si > > > > > ________________________________ > From: Dag Sonstebo <dag.sonst...@shapeblue.com> > Sent: Friday, April 14, 2017 10:57 AM > To: users@cloudstack.apache.org > Subject: Re: OVS Plugin > > Hi Imran, > > OVS is the same as GRE tunnelling, which you will have as an isolation method for guest networking see http://docs.cloudstack.apache.org/en/latest/networking/ovs-plugin.html. The OVS Plugin Apache CloudStack 4.8.0 documentation<http://docs.cloudstack.apache.org/en/latest/networking/ovs-plu gin.html> docs.cloudstack.apache.org Introduction to the OVS Plugin¶ The OVS plugin is the native SDN implementations in CloudStack, using GRE isolation method. The plugin can be used by CloudStack to ... > > Please let us know how you get on especially how your hypervisor nodes cope with CPU load once the GRE tunnels start growing in numbers (historically this has not scaled well). > > Regards, > Dag Sonstebo > Cloud Architect > ShapeBlue > > On 13/04/2017, 21:37, "Imran Ahmed" <im...@eaxiom.net> wrote: > > Dear Team, > > I have setup cloudstack 4.9 with KVM hypervisor and advanced networking on > CentOS7. Also we installed and setup openvswitch on the hypervisors (KVM) > hosts. > > Below are traffic labels for kvm > > Cloudbr0 for management > Cloudbr1 for guest > Cloudbr2 for public > > After configuring the zone, pod , cluster, host, primary and secondary > storages we wanted to enable the OVS plugin under service providers for the > guest network. > > However OVS is not shown in the list. > > Please suggest what could be wrong here. > > Kind regards, > > Imran > > > > > dag.sonst...@shapeblue.com > www.shapeblue.com<http://www.shapeblue.com> Shapeblue - The CloudStack Company<http://www.shapeblue.com/> www.shapeblue.com Background Cloudstack relies on a fixed download site when it fetches the built-in guest VM templates. That download site has historically > 53 Chandos Place, Covent Garden, London WC2N 4HSUK > @shapeblue > > > >
