Hi Alex. Please see the images using these links.
The first image has the subnet at the top that was added when the inital network was added. The second of the subnet added via the legacy interface after the network was setup. The second image is where you can see we can only the inital subnet can be used. I tried to enter an IP of the second subnet but as you can see it says we should use an IP from the subnet the was intially added. https://ibb.co/N997chT https://ibb.co/VxfwD8c Sent with ProtonMail Secure Email. ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Thursday, April 15, 2021 2:10 PM, Alex Mattioli <alex.matti...@shapeblue.com> wrote: > Hi, > Unfortunately I can't see the attachments. Would be good if you could upload > it somewhere and send the link :) > Cheers, > Alex > > alex.matti...@shapeblue.com > www.shapeblue.com > 3 London Bridge Street, 3rd floor, News Building, London SE1 9SGUK > @shapeblue > > -----Original Message----- > From: anonymousjones666 anonymousjones...@protonmail.com.INVALID > Sent: 15 April 2021 12:59 > To: users@cloudstack.apache.org > Subject: RE: Multiple Guest Subnets Default Network > > Yes you are right. We are using the legacy interface to add but when trying > to use the subnet we can only use the subnet that was added during the > network setup. See screenshot. > > Sent with ProtonMail Secure Email. > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > On Thursday, April 15, 2021 11:58 AM, anonymousjones666 > anonymousjones...@protonmail.com.INVALID wrote: > > > Hi Alex. > > To clarify:- > > Right now we have a single /28 assigned to the DefaultGuestNetwork which we > > can assign to instances. > > What we want is to add another public subnet ( different to our initial /28 > > ) and also use this subnet in the DefaultGuestNetwork so we have multiple > > IP subnets to assign to any instance deployed using this network. > > To answer your question - we dont want to assign 2 IPs to instances rather > > assign a single IP to any instance from multiple public subnets. From what > > I see now we can only use the subnet ( /28 ) that was initially added when > > setting up the guestnetwork. > > I have attached a screenshot of what we did but the second IP range > > cannot be used when deploying an instance > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > On Thursday, April 15, 2021 11:58 AM, anonymousjones666 > > anonymousjones...@protonmail.com wrote: > > > > > Hi Alex. > > > To clarify:- > > > Right now we have a single /28 assigned to the DefaultGuestNetwork which > > > we can assign to instances. > > > What we want is to add another public subnet ( different to our initial > > > /28 ) and also use this subnet in the DefaultGuestNetwork so we have > > > multiple IP subnets to assign to any instance deployed using this network. > > > To answer your question - we dont want to assign 2 IPs to instances > > > rather assign a single IP to any instance from multiple public subnets. > > > From what I see now we can only use the subnet ( /28 ) that was initially > > > added when setting up the guestnetwork. > > > I have attached a screenshot of what we did but the second IP range > > > cannot be used when deploying an instance Sent with ProtonMail Secure > > > Email. > > > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ > > > On Thursday, April 15, 2021 11:09 AM, Alex Mattioli > > > alex.matti...@shapeblue.com wrote: > > > > > > > Hi Mr 666. > > > > Let me see if I got it right. You have two /28s with Public IPs and > > > > want your VM to have one IP from each? > > > > Cheers > > > > Alex > > > > alex.matti...@shapeblue.com > > > > www.shapeblue.com > > > > 3 London Bridge Street, 3rd floor, News Building, London SE1 9SGUK > > > > @shapeblue -----Original Message----- > > > > From: anonymousjones666 anonymousjones...@protonmail.com.INVALID > > > > Sent: 15 April 2021 12:00 > > > > To: users@cloudstack.apache.org > > > > Subject: Multiple Guest Subnets Default Network Hello Is it > > > > possible to add multiple guest subnets to one guest network with CS > > > > 4.15 ? > > > > As an example we have a /28 subnet ( public ) and can deploy instances > > > > from this however, we can add another subnet to the defaultGuestNetwork > > > > ( using the legacy dashbaord ) but when deploying an instance we can > > > > only add an IP address from the initial /28 subnet and not the other we > > > > added. > > > > Are there any options to add multiple public subnets to one single > > > > guest network ? > > > > Thank You
